[Gnucash-changes] r11803 - gnucash/branches/cashutil/cashutil -
Adding cashutil manpage automation
Neil Williams
codehelp at cvs.gnucash.org
Thu Nov 3 06:07:16 EST 2005
Author: codehelp
Date: 2005-11-03 06:07:13 -0500 (Thu, 03 Nov 2005)
New Revision: 11803
Added:
gnucash/branches/cashutil/cashutil/doc/
gnucash/branches/cashutil/cashutil/doc/Makefile
gnucash/branches/cashutil/cashutil/doc/Makefile.am
gnucash/branches/cashutil/cashutil/doc/Makefile.in
gnucash/branches/cashutil/cashutil/doc/doxygen.cfg.in
gnucash/branches/cashutil/cashutil/doc/doxygen_main_page.c
gnucash/branches/cashutil/cashutil/doc/logic.txt
gnucash/branches/cashutil/cashutil/doc/man/
gnucash/branches/cashutil/cashutil/doc/man/Makefile
gnucash/branches/cashutil/cashutil/doc/man/Makefile.am
gnucash/branches/cashutil/cashutil/doc/man/Makefile.in
gnucash/branches/cashutil/cashutil/doc/xml/
gnucash/branches/cashutil/cashutil/doc/xml/Makefile
gnucash/branches/cashutil/cashutil/doc/xml/Makefile.am
gnucash/branches/cashutil/cashutil/doc/xml/Makefile.in
gnucash/branches/cashutil/cashutil/doc/xml/cashutil.docbook
gnucash/branches/cashutil/cashutil/doc/xml/cashutil.xml
gnucash/branches/cashutil/cashutil/doc/xml/catalog.xml
gnucash/branches/cashutil/cashutil/doc/xml/catalog.xml.in
gnucash/branches/cashutil/cashutil/doc/xml/docbook.xsl
gnucash/branches/cashutil/cashutil/doc/xml/docbook.xsl.in
Log:
Adding cashutil manpage automation
Added: gnucash/branches/cashutil/cashutil/doc/Makefile
===================================================================
--- gnucash/branches/cashutil/cashutil/doc/Makefile 2005-11-03 11:03:19 UTC (rev 11802)
+++ gnucash/branches/cashutil/cashutil/doc/Makefile 2005-11-03 11:07:13 UTC (rev 11803)
@@ -0,0 +1,645 @@
+# Makefile.in generated by automake 1.7.9 from Makefile.am.
+# cashutil/doc/Makefile. Generated from Makefile.in by configure.
+
+# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
+# Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+
+srcdir = .
+top_srcdir = ../..
+
+pkgdatadir = $(datadir)/gnucash
+pkglibdir = $(libdir)/gnucash
+pkgincludedir = $(includedir)/gnucash
+top_builddir = ../..
+
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = /usr/bin/install -c
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+host_triplet = i686-pc-linux-gnu
+ACLOCAL = ${SHELL} /opt/working/temp/cashutil/missing --run aclocal-1.7
+AMDEP_FALSE = #
+AMDEP_TRUE =
+AMTAR = ${SHELL} /opt/working/temp/cashutil/missing --run tar
+AR = ar
+ART_CFLAGS = -I/usr/include/libart-2.0
+ART_LIBS = -lart_lgpl_2
+AUTOCONF = ${SHELL} /opt/working/temp/cashutil/missing --run autoconf
+AUTOHEADER = ${SHELL} /opt/working/temp/cashutil/missing --run autoheader
+AUTOMAKE = ${SHELL} /opt/working/temp/cashutil/missing --run automake-1.7
+AWK = gawk
+BUILD_CASHUTIL_FALSE =
+BUILD_CASHUTIL_TRUE = #
+BUILD_GUILE = yes
+CATALOGS = da.gmo de.gmo el.gmo en_GB.gmo es.gmo es_NI.gmo fr.gmo hu.gmo it.gmo ja.gmo nb.gmo nl.gmo pl.gmo pt.gmo pt_BR.gmo ru.gmo rw.gmo sk.gmo sv.gmo ta.gmo uk.gmo zh_CN.gmo zh_TW.gmo
+CATOBJEXT = .gmo
+CC = gcc
+CCDEPMODE = depmode=gcc3
+CFLAGS = -g -O2 -I/usr/include/postgresql -Wall -Wunused -Wmissing-prototypes -Wmissing-declarations -Werror -Wdeclaration-after-statement -Wno-pointer-sign
+CPP = gcc -E
+CPPFLAGS =
+CXX = g++
+CXXCPP = g++ -E
+CXXDEPMODE = depmode=gcc3
+CXXFLAGS = -g -O2
+CYGPATH_W = echo
+DATADIRNAME = share
+DEFS = -DHAVE_CONFIG_H
+DEPDIR = .deps
+DL_LIB = -ldl
+DOC_FALSE = #
+DOC_TRUE =
+DOT =
+DOXYGEN = /usr/bin/doxygen
+ECHO = echo
+ECHO_C =
+ECHO_N = -n
+ECHO_T =
+EFENCE_LIBS =
+EGREP = grep -E
+ENABLE_DOXYGEN_FALSE =
+ENABLE_DOXYGEN_TRUE = #
+EXEEXT =
+F77 =
+FFLAGS =
+GCONF_CFLAGS = -DORBIT2=1 -pthread -I/usr/include/gconf/2 -I/usr/include/orbit-2.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include
+GCONF_LIBS = -Wl,--export-dynamic -pthread -lgconf-2 -lORBit-2 -lm -lgmodule-2.0 -ldl -lgthread-2.0 -lglib-2.0
+GCONF_SCHEMAS_INSTALL_FALSE = #
+GCONF_SCHEMAS_INSTALL_TRUE =
+GCONF_SCHEMA_CONFIG_SOURCE = xml::${prefix}/etc/gconf/gconf.xml.defaults
+GCONF_SCHEMA_CONFIG_SOURCE_DIRONLY = ${prefix}/etc/gconf/gconf.xml.defaults
+GCONF_SCHEMA_FILE_DIR = $(sysconfdir)/gconf/schemas
+GDK_PIXBUF_CFLAGS = -I/usr/include/gtk-2.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include
+GDK_PIXBUF_LIBS = -lgdk_pixbuf-2.0 -lm -lgobject-2.0 -lgmodule-2.0 -ldl -lglib-2.0
+GETTEXT_PACKAGE = gnucash
+GLADE_CFLAGS = -DXTHREADS -I/usr/include/libglade-2.0 -I/usr/include/gtk-2.0 -I/usr/include/libxml2 -I/usr/lib/gtk-2.0/include -I/usr/X11R6/include -I/usr/include/atk-1.0 -I/usr/include/pango-1.0 -I/usr/include/freetype2 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include
+GLADE_LIBS = -lglade-2.0 -lgtk-x11-2.0 -lxml2 -lz -lgdk-x11-2.0 -latk-1.0 -lgdk_pixbuf-2.0 -lm -lpangoxft-1.0 -lpangox-1.0 -lpangoft2-1.0 -lpango-1.0 -lgobject-2.0 -lgmodule-2.0 -ldl -lglib-2.0
+GLIB_CFLAGS = -pthread -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include
+GLIB_GENMARSHAL = /usr/bin/glib-genmarshal
+GLIB_LIBS = -pthread -lgthread-2.0 -lgobject-2.0 -lglib-2.0
+GLIB_MKENUMS = glib-mkenums
+GMOFILES = da.gmo de.gmo el.gmo en_GB.gmo es.gmo es_NI.gmo fr.gmo hu.gmo it.gmo ja.gmo nb.gmo nl.gmo pl.gmo pt.gmo pt_BR.gmo ru.gmo rw.gmo sk.gmo sv.gmo ta.gmo uk.gmo zh_CN.gmo zh_TW.gmo
+GMSGFMT = /usr/bin/msgfmt
+GNC_ACCOUNTS_DIR = ${GNC_SHAREDIR}/accounts
+GNC_ADD_ON_SRFIS =
+GNC_CONFIGDIR = ${sysconfdir}
+GNC_CTAGS_FILE =
+GNC_CTAGS_FILE_FALSE =
+GNC_CTAGS_FILE_TRUE = #
+GNC_DOC_INSTALL_DIR = ${datadir}/doc
+GNC_ETAGS_FILE =
+GNC_ETAGS_FILE_FALSE =
+GNC_ETAGS_FILE_TRUE = #
+GNC_FALSE_FALSE =
+GNC_FALSE_TRUE = #
+GNC_GLADE_DIR = ${GNC_SHAREDIR}/glade
+GNC_GWRAP_LIBDIR = ${GNC_SHAREDIR}/guile-modules/g-wrapped
+GNC_HAVE_GUILE_WWW_FALSE =
+GNC_HAVE_GUILE_WWW_TRUE = #
+GNC_HELPDIR = ${datadir}
+GNC_INCLUDE_DIR = ${includedir}
+GNC_LIBDIR = ${libdir}
+GNC_LIBEXECDIR = ${libexecdir}
+GNC_MODULE_DIR = ${pkglibdir}
+GNC_PIXMAP_DIR = ${GNC_SHAREDIR}/pixmaps
+GNC_SCM_INSTALL_DIR = ${datadir}/scm
+GNC_SHAREDIR = ${datadir}
+GNC_SRFI_LOAD_PATH =
+GNC_TEST_SRFI_LOAD_CMD =
+GNC_UI_DIR = ${GNC_SHAREDIR}/ui
+GNOME_CFLAGS = -DORBIT2=1 -pthread -DXTHREADS -I/usr/include/libgnomeui-2.0 -I/usr/include/libgnome-2.0 -I/usr/include/libgnomecanvas-2.0 -I/usr/include/gtk-2.0 -I/usr/include/libart-2.0 -I/usr/include/gconf/2 -I/usr/include/libbonoboui-2.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/orbit-2.0 -I/usr/include/libbonobo-2.0 -I/usr/include/gnome-vfs-2.0 -I/usr/lib/gnome-vfs-2.0/include -I/usr/include/bonobo-activation-2.0 -I/usr/include/pango-1.0 -I/usr/include/freetype2 -I/usr/lib/gtk-2.0/include -I/usr/X11R6/include -I/usr/include/atk-1.0 -I/usr/include/libxml2
+GNOME_LIBS = -Wl,--export-dynamic -pthread -L/usr/X11R6/lib -lgnomeui-2 -lSM -lICE -lbonoboui-2 -lxml2 -lz -lgnomecanvas-2 -lgnome-2 -lpopt -lart_lgpl_2 -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lgdk_pixbuf-2.0 -lpangoxft-1.0 -lpangox-1.0 -lpangoft2-1.0 -lpango-1.0 -lgobject-2.0 -lgnomevfs-2 -lbonobo-2 -lgconf-2 -lbonobo-activation -lORBit-2 -lm -lgmodule-2.0 -ldl -lgthread-2.0 -lglib-2.0
+GNOME_PRINT_CFLAGS = -DXTHREADS -I/usr/include/libgnomeprint-2.2 -I/usr/include/libart-2.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libxml2 -I/usr/include/pango-1.0 -I/usr/include/libgnomeprintui-2.2 -I/usr/include/libgnomecanvas-2.0 -I/usr/include/freetype2 -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/X11R6/include -I/usr/include/atk-1.0
+GNOME_PRINT_LIBS = -Wl,--export-dynamic -lgnomeprintui-2-2 -lgnomeprint-2-2 -lgnomecanvas-2 -lxml2 -lz -lart_lgpl_2 -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lgdk_pixbuf-2.0 -lm -lpangoxft-1.0 -lpangox-1.0 -lpangoft2-1.0 -lpango-1.0 -lgobject-2.0 -lgmodule-2.0 -ldl -lglib-2.0
+GNUCASH_APP_UTILS_CFLAGS = -DGNUCASH -pthread -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -std=gnu99
+GNUCASH_APP_UTILS_LIBS = -L${pkglibdir} -L${GNC_SHAREDIR}/guile-modules/g-wrapped -pthread -lgthread-2.0 -lgobject-2.0 -lglib-2.0 -lguile -lguile-ltdl -lqthreads -lpthread -lcrypt -lm -lgncmod-engine -lgw-engine -lgw-kvp -lgncmodule -lgncmod-calculation -lgncmod-app-utils
+GNUCASH_ENABLE_GUI_FALSE = #
+GNUCASH_ENABLE_GUI_TRUE =
+GNUCASH_ENGINE_BASE_CFLAGS = -DGNUCASH -pthread -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -std=gnu99
+GNUCASH_ENGINE_BASE_LIBS = -pthread -lgthread-2.0 -lgobject-2.0 -lglib-2.0
+GNUCASH_ENGINE_CFLAGS = -DGNUCASH -pthread -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -std=gnu99
+GNUCASH_ENGINE_LIBS = -L${pkglibdir} -L${GNC_SHAREDIR}/guile-modules/g-wrapped -pthread -lgthread-2.0 -lgobject-2.0 -lglib-2.0 -lguile -lguile-ltdl -lqthreads -lpthread -lcrypt -lm -lgncmod-engine -lgw-engine -lgw-kvp -lgncmodule
+GNUCASH_GNOME_UTILS_CFLAGS = -DGNUCASH -pthread -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -std=gnu99 -pthread -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -DXTHREADS -I/usr/include/libgnomeprint-2.2 -I/usr/include/libart-2.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libxml2 -I/usr/include/pango-1.0 -I/usr/include/libgnomeprintui-2.2 -I/usr/include/libgnomecanvas-2.0 -I/usr/include/freetype2 -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/X11R6/include -I/usr/include/atk-1.0 -I/usr/include/gtk-2.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include
+GNUCASH_GNOME_UTILS_LIBS = -L${pkglibdir} -L${GNC_SHAREDIR}/guile-modules/g-wrapped -pthread -lgthread-2.0 -lgobject-2.0 -lglib-2.0 -lguile -lguile-ltdl -lqthreads -lpthread -lcrypt -lm -lgncmod-engine -lgw-engine -lgw-kvp -lgncmodule -lgncmod-calculation -lgncmod-app-utils -Wl,--export-dynamic -pthread -L/usr/X11R6/lib -lgnomeui-2 -lSM -lICE -lbonoboui-2 -lxml2 -lz -lgnomecanvas-2 -lgnome-2 -lpopt -lart_lgpl_2 -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lgdk_pixbuf-2.0 -lpangoxft-1.0 -lpangox-1.0 -lpangoft2-1.0 -lpango-1.0 -lgobject-2.0 -lgnomevfs-2 -lbonobo-2 -lgconf-2 -lbonobo-activation -lORBit-2 -lm -lgmodule-2.0 -ldl -lgthread-2.0 -lglib-2.0 -lgncmod-network-utils -Wl,--export-dynamic -lgnomeprintui-2-2 -lgnomeprint-2-2 -lgnomecanvas-2 -lxml2 -lz -lart_lgpl_2 -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lgdk_pixbuf-2.0 -lm -lpangoxft-1.0 -lpangox-1.0 -lpangoft2-1.0 -lpango-1.0 -lgobject-2.0 -lgmodule-2.0 -ldl -lglib-2.0 -Wl,--export-dynamic -pthread -L/usr/X11R6/lib -lgtkhtml-3.1 -lgnomeui-2 -lSM -lICE -lgnomeprintui-2-2 -lglade-2.0 -lbonoboui-2 -lgnome-2 -lpopt -lgnomevfs-2 -lbonobo-2 -lgconf-2 -lbonobo-activation -lORBit-2 -lgthread-2.0 -lgnomeprint-2-2 -lgnomecanvas-2 -lart_lgpl_2 -lgtk-x11-2.0 -lxml2 -lz -lgdk-x11-2.0 -latk-1.0 -lgdk_pixbuf-2.0 -lm -lpangoxft-1.0 -lpangox-1.0 -lpangoft2-1.0 -lpango-1.0 -lgobject-2.0 -lgmodule-2.0 -ldl -lglib-2.0 -lglade-2.0 -lgtk-x11-2.0 -lxml2 -lz -lgdk-x11-2.0 -latk-1.0 -lgdk_pixbuf-2.0 -lm -lpangoxft-1.0 -lpangox-1.0 -lpangoft2-1.0 -lpango-1.0 -lgobject-2.0 -lgmodule-2.0 -ldl -lglib-2.0 -lgdk_pixbuf-2.0 -lm -lgobject-2.0 -lgmodule-2.0 -ldl -lglib-2.0 -lgncmod-gnome-utils
+GNUCASH_MAJOR_VERSION = 1
+GNUCASH_MICRO_VERSION = 0
+GNUCASH_MINOR_VERSION = 9
+GNUCASH_NETWORK_UTILS_CFLAGS = -pthread -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include
+GNUCASH_NETWORK_UTILS_LIBS = -Wl,--export-dynamic -pthread -L/usr/X11R6/lib -lgnomeui-2 -lSM -lICE -lbonoboui-2 -lxml2 -lz -lgnomecanvas-2 -lgnome-2 -lpopt -lart_lgpl_2 -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lgdk_pixbuf-2.0 -lpangoxft-1.0 -lpangox-1.0 -lpangoft2-1.0 -lpango-1.0 -lgobject-2.0 -lgnomevfs-2 -lbonobo-2 -lgconf-2 -lbonobo-activation -lORBit-2 -lm -lgmodule-2.0 -ldl -lgthread-2.0 -lglib-2.0 -lgncmod-network-utils
+GNUCASH_REGISTER_CORE_CFLAGS = -DGNUCASH -pthread -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -std=gnu99 -pthread -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -DXTHREADS -I/usr/include/libgnomeprint-2.2 -I/usr/include/libart-2.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libxml2 -I/usr/include/pango-1.0 -I/usr/include/libgnomeprintui-2.2 -I/usr/include/libgnomecanvas-2.0 -I/usr/include/freetype2 -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/X11R6/include -I/usr/include/atk-1.0 -I/usr/include/gtk-2.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include
+GNUCASH_REGISTER_CORE_LIBS = -L${pkglibdir} -L${GNC_SHAREDIR}/guile-modules/g-wrapped -pthread -lgthread-2.0 -lgobject-2.0 -lglib-2.0 -lguile -lguile-ltdl -lqthreads -lpthread -lcrypt -lm -lgncmod-engine -lgw-engine -lgw-kvp -lgncmodule -lgncmod-calculation -lgncmod-app-utils -Wl,--export-dynamic -pthread -L/usr/X11R6/lib -lgnomeui-2 -lSM -lICE -lbonoboui-2 -lxml2 -lz -lgnomecanvas-2 -lgnome-2 -lpopt -lart_lgpl_2 -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lgdk_pixbuf-2.0 -lpangoxft-1.0 -lpangox-1.0 -lpangoft2-1.0 -lpango-1.0 -lgobject-2.0 -lgnomevfs-2 -lbonobo-2 -lgconf-2 -lbonobo-activation -lORBit-2 -lm -lgmodule-2.0 -ldl -lgthread-2.0 -lglib-2.0 -lgncmod-network-utils -Wl,--export-dynamic -lgnomeprintui-2-2 -lgnomeprint-2-2 -lgnomecanvas-2 -lxml2 -lz -lart_lgpl_2 -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lgdk_pixbuf-2.0 -lm -lpangoxft-1.0 -lpangox-1.0 -lpangoft2-1.0 -lpango-1.0 -lgobject-2.0 -lgmodule-2.0 -ldl -lglib-2.0 -Wl,--export-dynamic -pthread -L/usr/X11R6/lib -lgtkhtml-3.1 -lgnomeui-2 -lSM -lICE -lgnomeprintui-2-2 -lglade-2.0 -lbonoboui-2 -lgnome-2 -lpopt -lgnomevfs-2 -lbonobo-2 -lgconf-2 -lbonobo-activation -lORBit-2 -lgthread-2.0 -lgnomeprint-2-2 -lgnomecanvas-2 -lart_lgpl_2 -lgtk-x11-2.0 -lxml2 -lz -lgdk-x11-2.0 -latk-1.0 -lgdk_pixbuf-2.0 -lm -lpangoxft-1.0 -lpangox-1.0 -lpangoft2-1.0 -lpango-1.0 -lgobject-2.0 -lgmodule-2.0 -ldl -lglib-2.0 -lglade-2.0 -lgtk-x11-2.0 -lxml2 -lz -lgdk-x11-2.0 -latk-1.0 -lgdk_pixbuf-2.0 -lm -lpangoxft-1.0 -lpangox-1.0 -lpangoft2-1.0 -lpango-1.0 -lgobject-2.0 -lgmodule-2.0 -ldl -lglib-2.0 -lgdk_pixbuf-2.0 -lm -lgobject-2.0 -lgmodule-2.0 -ldl -lglib-2.0 -lgncmod-gnome-utils -lgncmod-register-core
+GNUCASH_SEPARATE_BUILDDIR_FALSE =
+GNUCASH_SEPARATE_BUILDDIR_TRUE = #
+GOBJECT_QUERY = gobject-query
+GSF_CFLAGS = -I/usr/include/libgsf-1 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libxml2
+GSF_LIBS = -lgsf-gnome-1 -lgsf-1 -lgobject-2.0 -lxml2 -lz -lm -lglib-2.0
+GTKHTML_CFLAGS = -DXTHREADS -DORBIT2=1 -pthread -I/usr/include/libgtkhtml-3.1 -I/usr/include/gtk-2.0 -I/usr/include/libgnomeui-2.0 -I/usr/include/libgnomeprint-2.2 -I/usr/include/libgnomeprintui-2.2 -I/usr/include/libglade-2.0 -I/usr/lib/gtk-2.0/include -I/usr/X11R6/include -I/usr/include/atk-1.0 -I/usr/include/pango-1.0 -I/usr/include/freetype2 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libgnome-2.0 -I/usr/include/libgnomecanvas-2.0 -I/usr/include/libart-2.0 -I/usr/include/gconf/2 -I/usr/include/libbonoboui-2.0 -I/usr/include/orbit-2.0 -I/usr/include/libbonobo-2.0 -I/usr/include/gnome-vfs-2.0 -I/usr/lib/gnome-vfs-2.0/include -I/usr/include/bonobo-activation-2.0 -I/usr/include/libxml2
+GTKHTML_LIBS = -Wl,--export-dynamic -pthread -L/usr/X11R6/lib -lgtkhtml-3.1 -lgnomeui-2 -lSM -lICE -lgnomeprintui-2-2 -lglade-2.0 -lbonoboui-2 -lgnome-2 -lpopt -lgnomevfs-2 -lbonobo-2 -lgconf-2 -lbonobo-activation -lORBit-2 -lgthread-2.0 -lgnomeprint-2-2 -lgnomecanvas-2 -lart_lgpl_2 -lgtk-x11-2.0 -lxml2 -lz -lgdk-x11-2.0 -latk-1.0 -lgdk_pixbuf-2.0 -lm -lpangoxft-1.0 -lpangox-1.0 -lpangoft2-1.0 -lpango-1.0 -lgobject-2.0 -lgmodule-2.0 -ldl -lglib-2.0
+GTK_CFLAGS = -DXTHREADS -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/X11R6/include -I/usr/include/atk-1.0 -I/usr/include/pango-1.0 -I/usr/include/freetype2 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include
+GTK_LIBS = -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lgdk_pixbuf-2.0 -lm -lpangoxft-1.0 -lpangox-1.0 -lpangoft2-1.0 -lpango-1.0 -lgobject-2.0 -lgmodule-2.0 -ldl -lglib-2.0
+GTK_XIM_FLAGS = -DUSE_XIM
+GUILE = /usr/bin/guile
+GUILE_FALSE = #
+GUILE_INCS =
+GUILE_LIBS = -lguile -lguile-ltdl -lqthreads -lpthread -lcrypt -lm
+GUILE_TRUE =
+G_WRAP_COMPILE_ARGS = -std=gnu99
+G_WRAP_CONFIG = /usr/bin/g-wrap-config
+G_WRAP_LIB_DIR = /usr/lib/site
+G_WRAP_LINK_ARGS = -lgwrap-guile-runtime -lgwrap-core-runtime -lguile -lguile-ltdl -lqthreads -lpthread -lcrypt -lm -lffi
+G_WRAP_MODULE_DIR = /usr/share/guile/site
+HAVE_GLIB26_FALSE = #
+HAVE_GLIB26_TRUE =
+HBCI_CFLAGS =
+HBCI_DIR =
+HBCI_LIBS =
+INSTALL_DATA = ${INSTALL} -m 644
+INSTALL_PROGRAM = ${INSTALL}
+INSTALL_SCRIPT = ${INSTALL}
+INSTALL_STRIP_PROGRAM = ${SHELL} $(install_sh) -c -s
+INSTOBJEXT = .mo
+INTLLIBS =
+INTLTOOL_CAVES_RULE = %.caves: %.caves.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@
+INTLTOOL_DESKTOP_RULE = %.desktop: %.desktop.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@
+INTLTOOL_DIRECTORY_RULE = %.directory: %.directory.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@
+INTLTOOL_EXTRACT = $(top_builddir)/intltool-extract
+INTLTOOL_ICONV = /usr/bin/iconv
+INTLTOOL_KBD_RULE = %.kbd: %.kbd.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -m -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@
+INTLTOOL_KEYS_RULE = %.keys: %.keys.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -k -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@
+INTLTOOL_MERGE = $(top_builddir)/intltool-merge
+INTLTOOL_MSGFMT = /usr/bin/msgfmt
+INTLTOOL_MSGMERGE = /usr/bin/msgmerge
+INTLTOOL_OAF_RULE = %.oaf: %.oaf.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -o -p $(top_srcdir)/po $< $@
+INTLTOOL_PERL = /usr/bin/perl
+INTLTOOL_PONG_RULE = %.pong: %.pong.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@
+INTLTOOL_PROP_RULE = %.prop: %.prop.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@
+INTLTOOL_SCHEMAS_RULE = %.schemas: %.schemas.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -s -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@
+INTLTOOL_SERVER_RULE = %.server: %.server.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -o -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@
+INTLTOOL_SHEET_RULE = %.sheet: %.sheet.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@
+INTLTOOL_SOUNDLIST_RULE = %.soundlist: %.soundlist.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@
+INTLTOOL_THEME_RULE = %.theme: %.theme.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@
+INTLTOOL_UI_RULE = %.ui: %.ui.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@
+INTLTOOL_UPDATE = $(top_builddir)/intltool-update
+INTLTOOL_XAM_RULE = %.xam: %.xml.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@
+INTLTOOL_XGETTEXT = /usr/bin/xgettext
+INTLTOOL_XML_NOMERGE_RULE = %.xml: %.xml.in $(INTLTOOL_MERGE) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u /tmp $< $@
+INTLTOOL_XML_RULE = %.xml: %.xml.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@
+LC_MESSAGES_ENUM = LC_MESSAGES
+LDFLAGS =
+LIBGOFFICE_CFLAGS = -DXTHREADS -I/usr/include/libgoffice-1 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libgsf-1 -I/usr/include/libxml2 -I/usr/include/gtk-2.0 -I/usr/include/libglade-2.0 -I/usr/include/libgnomeprint-2.2 -I/usr/include/libart-2.0 -I/usr/lib/gtk-2.0/include -I/usr/X11R6/include -I/usr/include/atk-1.0 -I/usr/include/pango-1.0 -I/usr/include/freetype2
+LIBGOFFICE_LIBS = -Wl,--export-dynamic -lgoffice-1 -lgsf-1 -lglade-2.0 -lgnomeprint-2-2 -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lgdk_pixbuf-2.0 -lpangoxft-1.0 -lpangox-1.0 -lpangoft2-1.0 -lart_lgpl_2 -lxml2 -lz -lm -lpango-1.0 -lgobject-2.0 -lgmodule-2.0 -ldl -lglib-2.0
+LIBGUPPI_CFLAGS =
+LIBGUPPI_LIBS =
+LIBOBJS =
+LIBOBJS_SEDSCRIPT = s,\.[^.]* ,&,g;s,\.[^.]*$$,&,
+LIBOFX_CFLAGS =
+LIBOFX_LIBS =
+LIBQOF_BACKEND_QSF_LIBRARY_VERSION =
+LIBQOF_LIBRARY_VERSION =
+LIBS = -lpopt -lm -lm
+LIBTOOL = $(SHELL) $(top_builddir)/libtool
+LIBTOOL_DEPS = ./ltmain.sh
+LIBXML2_CFLAGS = -I/usr/include/libxml2
+LIBXML2_LIBS = -lxml2 -lz -lm
+LIBXML_VERSION = 0.20
+LN_S = ln -s
+LOCALE_DIR = ${prefix}/share/locale
+LTLIBOBJS =
+MAINT =
+MAINTAINER_MODE_FALSE = #
+MAINTAINER_MODE_TRUE =
+MAKEINFO = ${SHELL} /opt/working/temp/cashutil/missing --run makeinfo
+MKINSTALLDIRS = ./mkinstalldirs
+MSGFMT = /usr/bin/msgfmt
+MT940_DIR =
+OBJEXT = o
+OFX_DIR =
+PACKAGE = gnucash
+PACKAGE_BUGREPORT = http://bugzilla.gnome.org/enter_bug.cgi?product=GnuCash
+PACKAGE_NAME = gnucash
+PACKAGE_STRING = gnucash 1.99.0
+PACKAGE_TARNAME = gnucash
+PACKAGE_VERSION = 1.99.0
+PATH_SEPARATOR = :
+PERL = /usr/bin/perl
+PERLINCL = /usr/lib/perl/5.8
+PGSQL_CFLAGS = -I/usr/include/postgresql
+PGSQL_LIBS = -L/usr/lib
+PKG_CONFIG = /usr/bin/pkg-config
+POFILES = da.po de.po el.po en_GB.po es.po es_NI.po fr.po hu.po it.po ja.po nb.po nl.po pl.po pt.po pt_BR.po ru.po rw.po sk.po sv.po ta.po uk.po zh_CN.po zh_TW.po
+POSUB = po
+PO_IN_DATADIR_FALSE =
+PO_IN_DATADIR_TRUE =
+PRINT_CFLAGS = -I/usr/include/libgnomeprint-2.2 -I/usr/include/libart-2.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libxml2 -I/usr/include/pango-1.0
+PRINT_LIBS = -Wl,--export-dynamic -lgnomeprint-2-2 -lart_lgpl_2 -lxml2 -lz -lm -lpango-1.0 -lgobject-2.0 -lgmodule-2.0 -ldl -lglib-2.0
+QOF_CFLAGS = -I/usr/include/qof -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libxml2
+QOF_LIBS = -lqof -lgda-2 -lglib-2.0 -lxml2 -lz -lm
+QOF_LIB_DIR = /usr/lib
+QOF_PREFIX = /usr
+QSF_SCHEMA_DIR = ${GNC_SHAREDIR}/xml/qsf
+QTTHREADS_LIB = -lqthreads
+RANLIB = ranlib
+READLINE_LIB = -lreadline
+RPC_DIR =
+SET_MAKE =
+SHELL = /bin/sh
+SQL_DIR = postgres
+STRIP = strip
+TERMCAP_LIB = -ltermcap
+USE_LIBGOFFICE =
+USE_LIBGOFFICE_FALSE = #
+USE_LIBGOFFICE_TRUE =
+USE_LIBQOF =
+USE_LIBQOF_FALSE =
+USE_LIBQOF_TRUE = #
+USE_NLS = yes
+VERSION = 1.99.0
+WITH_GNOME_FALSE = #
+WITH_GNOME_TRUE =
+WITH_GTK_FALSE = #
+WITH_GTK_TRUE =
+XGETTEXT = /usr/bin/xgettext
+XML_CFLAGS = -I/usr/include/libxml2
+XML_LIBS = -lxml2 -lz -lm
+ac_ct_AR = ar
+ac_ct_CC = gcc
+ac_ct_CXX = g++
+ac_ct_F77 =
+ac_ct_RANLIB = ranlib
+ac_ct_STRIP = strip
+ac_pt_PKG_CONFIG =
+am__fastdepCC_FALSE = #
+am__fastdepCC_TRUE =
+am__fastdepCXX_FALSE = #
+am__fastdepCXX_TRUE =
+am__include = include
+am__leading_dot = .
+am__quote =
+aqbanking_data =
+aqbanking_dir =
+aqbanking_includes =
+aqbanking_libs =
+aqbanking_libspp =
+aqbanking_plugins =
+bindir = ${exec_prefix}/bin
+build = i686-pc-linux-gnu
+build_alias =
+build_cpu = i686
+build_os = linux-gnu
+build_vendor = pc
+cflags_set = yes
+datadir = ${prefix}/share
+enable_dot = no
+enable_html_docs = yes
+enable_latex_docs = no
+exec_prefix = ${prefix}
+gnumeric_icondir = ${GNC_SHAREDIR}/pixmaps
+gnumeric_plugindir = ${gog_plugindir}
+gog_plugindir = ${GNC_LIBDIR}/plugins
+host = i686-pc-linux-gnu
+host_alias =
+host_cpu = i686
+host_os = linux-gnu
+host_vendor = pc
+includedir = ${prefix}/include
+infodir = ${prefix}/info
+install_sh = /opt/working/temp/cashutil/install-sh
+libdir = ${exec_prefix}/lib
+libexecdir = ${exec_prefix}/libexec
+localstatedir = ${prefix}/var
+mandir = ${prefix}/man
+oldincludedir = /usr/include
+prefix = /opt/garfield/gnccashutil
+program_transform_name = s,x,x,
+sbindir = ${exec_prefix}/sbin
+sharedstatedir = ${prefix}/com
+subdirs =
+sysconfdir = ${prefix}/etc
+target_alias =
+ at BUILD_XML_FALSE@SUBDIRS = man
+ at BUILD_XML_TRUE@SUBDIRS = xml man
+
+EXTRA_DIST = doxygen.cfg.in
+subdir = cashutil/doc
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+DIST_SOURCES =
+
+RECURSIVE_TARGETS = info-recursive dvi-recursive pdf-recursive \
+ ps-recursive install-info-recursive uninstall-info-recursive \
+ all-recursive install-data-recursive install-exec-recursive \
+ installdirs-recursive install-recursive uninstall-recursive \
+ check-recursive installcheck-recursive
+DIST_COMMON = $(srcdir)/Makefile.in Makefile.am
+DIST_SUBDIRS = man xml
+all: all-recursive
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --gnu cashutil/doc/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)
+
+mostlyclean-libtool:
+ -rm -f *.lo
+
+clean-libtool:
+ -rm -rf .libs _libs
+
+distclean-libtool:
+ -rm -f libtool
+uninstall-info-am:
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+# (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+ @set fnord $$MAKEFLAGS; amf=$$2; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+ @set fnord $$MAKEFLAGS; amf=$$2; \
+ dot_seen=no; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ rev=''; for subdir in $$list; do \
+ if test "$$subdir" = "."; then :; else \
+ rev="$$subdir $$rev"; \
+ fi; \
+ done; \
+ rev="$$rev ."; \
+ target=`echo $@ | sed s/-recursive//`; \
+ for subdir in $$rev; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+ done && test -z "$$fail"
+tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+ done
+ctags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+ done
+
+ETAGS = etags
+ETAGSFLAGS =
+
+CTAGS = ctags
+CTAGSFLAGS =
+
+tags: TAGS
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ mkid -fID $$unique
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ if (etags --etags-include --version) >/dev/null 2>&1; then \
+ include_option=--etags-include; \
+ else \
+ include_option=--include; \
+ fi; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test -f $$subdir/TAGS && \
+ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(ETAGS_ARGS)$$tags$$unique" \
+ || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$tags $$unique
+
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$tags $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && cd $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+
+top_distdir = ../..
+distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+ list='$(DISTFILES)'; for file in $$list; do \
+ case $$file in \
+ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+ esac; \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+ dir="/$$dir"; \
+ $(mkinstalldirs) "$(distdir)$$dir"; \
+ else \
+ dir=''; \
+ fi; \
+ if test -d $$d/$$file; then \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ else \
+ test -f $(distdir)/$$file \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
+ fi; \
+ done
+ list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test -d $(distdir)/$$subdir \
+ || mkdir $(distdir)/$$subdir \
+ || exit 1; \
+ (cd $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$(top_distdir)" \
+ distdir=../$(distdir)/$$subdir \
+ distdir) \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+check: check-recursive
+all-am: Makefile
+installdirs: installdirs-recursive
+installdirs-am:
+
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-recursive
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-libtool \
+ distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-recursive
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-info-am
+
+uninstall-info: uninstall-info-recursive
+
+.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-am clean \
+ clean-generic clean-libtool clean-recursive ctags \
+ ctags-recursive distclean distclean-generic distclean-libtool \
+ distclean-recursive distclean-tags distdir dvi dvi-am \
+ dvi-recursive info info-am info-recursive install install-am \
+ install-data install-data-am install-data-recursive \
+ install-exec install-exec-am install-exec-recursive \
+ install-info install-info-am install-info-recursive install-man \
+ install-recursive install-strip installcheck installcheck-am \
+ installdirs installdirs-am installdirs-recursive \
+ maintainer-clean maintainer-clean-generic \
+ maintainer-clean-recursive mostlyclean mostlyclean-generic \
+ mostlyclean-libtool mostlyclean-recursive pdf pdf-am \
+ pdf-recursive ps ps-am ps-recursive tags tags-recursive \
+ uninstall uninstall-am uninstall-info-am \
+ uninstall-info-recursive uninstall-recursive
+
+
+all:
+
+doc: doxygen.cfg
+ rm -rf html refman.pdf
+ doxygen doxygen.cfg
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
Added: gnucash/branches/cashutil/cashutil/doc/Makefile.am
===================================================================
--- gnucash/branches/cashutil/cashutil/doc/Makefile.am 2005-11-03 11:03:19 UTC (rev 11802)
+++ gnucash/branches/cashutil/cashutil/doc/Makefile.am 2005-11-03 11:07:13 UTC (rev 11803)
@@ -0,0 +1,13 @@
+if BUILD_XML
+SUBDIRS = xml man
+else
+SUBDIRS = man
+endif
+
+EXTRA_DIST = doxygen.cfg.in
+
+all:
+
+doc: doxygen.cfg
+ rm -rf html refman.pdf
+ doxygen doxygen.cfg
Added: gnucash/branches/cashutil/cashutil/doc/Makefile.in
===================================================================
--- gnucash/branches/cashutil/cashutil/doc/Makefile.in 2005-11-03 11:03:19 UTC (rev 11802)
+++ gnucash/branches/cashutil/cashutil/doc/Makefile.in 2005-11-03 11:07:13 UTC (rev 11803)
@@ -0,0 +1,645 @@
+# Makefile.in generated by automake 1.7.9 from Makefile.am.
+# @configure_input@
+
+# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
+# Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+ at SET_MAKE@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ../..
+
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+host_triplet = @host@
+ACLOCAL = @ACLOCAL@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+AR = @AR@
+ART_CFLAGS = @ART_CFLAGS@
+ART_LIBS = @ART_LIBS@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BUILD_CASHUTIL_FALSE = @BUILD_CASHUTIL_FALSE@
+BUILD_CASHUTIL_TRUE = @BUILD_CASHUTIL_TRUE@
+BUILD_GUILE = @BUILD_GUILE@
+CATALOGS = @CATALOGS@
+CATOBJEXT = @CATOBJEXT@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DATADIRNAME = @DATADIRNAME@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DL_LIB = @DL_LIB@
+DOC_FALSE = @DOC_FALSE@
+DOC_TRUE = @DOC_TRUE@
+DOT = @DOT@
+DOXYGEN = @DOXYGEN@
+ECHO = @ECHO@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EFENCE_LIBS = @EFENCE_LIBS@
+EGREP = @EGREP@
+ENABLE_DOXYGEN_FALSE = @ENABLE_DOXYGEN_FALSE@
+ENABLE_DOXYGEN_TRUE = @ENABLE_DOXYGEN_TRUE@
+EXEEXT = @EXEEXT@
+F77 = @F77@
+FFLAGS = @FFLAGS@
+GCONF_CFLAGS = @GCONF_CFLAGS@
+GCONF_LIBS = @GCONF_LIBS@
+GCONF_SCHEMAS_INSTALL_FALSE = @GCONF_SCHEMAS_INSTALL_FALSE@
+GCONF_SCHEMAS_INSTALL_TRUE = @GCONF_SCHEMAS_INSTALL_TRUE@
+GCONF_SCHEMA_CONFIG_SOURCE = @GCONF_SCHEMA_CONFIG_SOURCE@
+GCONF_SCHEMA_CONFIG_SOURCE_DIRONLY = @GCONF_SCHEMA_CONFIG_SOURCE_DIRONLY@
+GCONF_SCHEMA_FILE_DIR = @GCONF_SCHEMA_FILE_DIR@
+GDK_PIXBUF_CFLAGS = @GDK_PIXBUF_CFLAGS@
+GDK_PIXBUF_LIBS = @GDK_PIXBUF_LIBS@
+GETTEXT_PACKAGE = @GETTEXT_PACKAGE@
+GLADE_CFLAGS = @GLADE_CFLAGS@
+GLADE_LIBS = @GLADE_LIBS@
+GLIB_CFLAGS = @GLIB_CFLAGS@
+GLIB_GENMARSHAL = @GLIB_GENMARSHAL@
+GLIB_LIBS = @GLIB_LIBS@
+GLIB_MKENUMS = @GLIB_MKENUMS@
+GMOFILES = @GMOFILES@
+GMSGFMT = @GMSGFMT@
+GNC_ACCOUNTS_DIR = @GNC_ACCOUNTS_DIR@
+GNC_ADD_ON_SRFIS = @GNC_ADD_ON_SRFIS@
+GNC_CONFIGDIR = @GNC_CONFIGDIR@
+GNC_CTAGS_FILE = @GNC_CTAGS_FILE@
+GNC_CTAGS_FILE_FALSE = @GNC_CTAGS_FILE_FALSE@
+GNC_CTAGS_FILE_TRUE = @GNC_CTAGS_FILE_TRUE@
+GNC_DOC_INSTALL_DIR = @GNC_DOC_INSTALL_DIR@
+GNC_ETAGS_FILE = @GNC_ETAGS_FILE@
+GNC_ETAGS_FILE_FALSE = @GNC_ETAGS_FILE_FALSE@
+GNC_ETAGS_FILE_TRUE = @GNC_ETAGS_FILE_TRUE@
+GNC_FALSE_FALSE = @GNC_FALSE_FALSE@
+GNC_FALSE_TRUE = @GNC_FALSE_TRUE@
+GNC_GLADE_DIR = @GNC_GLADE_DIR@
+GNC_GWRAP_LIBDIR = @GNC_GWRAP_LIBDIR@
+GNC_HAVE_GUILE_WWW_FALSE = @GNC_HAVE_GUILE_WWW_FALSE@
+GNC_HAVE_GUILE_WWW_TRUE = @GNC_HAVE_GUILE_WWW_TRUE@
+GNC_HELPDIR = @GNC_HELPDIR@
+GNC_INCLUDE_DIR = @GNC_INCLUDE_DIR@
+GNC_LIBDIR = @GNC_LIBDIR@
+GNC_LIBEXECDIR = @GNC_LIBEXECDIR@
+GNC_MODULE_DIR = @GNC_MODULE_DIR@
+GNC_PIXMAP_DIR = @GNC_PIXMAP_DIR@
+GNC_SCM_INSTALL_DIR = @GNC_SCM_INSTALL_DIR@
+GNC_SHAREDIR = @GNC_SHAREDIR@
+GNC_SRFI_LOAD_PATH = @GNC_SRFI_LOAD_PATH@
+GNC_TEST_SRFI_LOAD_CMD = @GNC_TEST_SRFI_LOAD_CMD@
+GNC_UI_DIR = @GNC_UI_DIR@
+GNOME_CFLAGS = @GNOME_CFLAGS@
+GNOME_LIBS = @GNOME_LIBS@
+GNOME_PRINT_CFLAGS = @GNOME_PRINT_CFLAGS@
+GNOME_PRINT_LIBS = @GNOME_PRINT_LIBS@
+GNUCASH_APP_UTILS_CFLAGS = @GNUCASH_APP_UTILS_CFLAGS@
+GNUCASH_APP_UTILS_LIBS = @GNUCASH_APP_UTILS_LIBS@
+GNUCASH_ENABLE_GUI_FALSE = @GNUCASH_ENABLE_GUI_FALSE@
+GNUCASH_ENABLE_GUI_TRUE = @GNUCASH_ENABLE_GUI_TRUE@
+GNUCASH_ENGINE_BASE_CFLAGS = @GNUCASH_ENGINE_BASE_CFLAGS@
+GNUCASH_ENGINE_BASE_LIBS = @GNUCASH_ENGINE_BASE_LIBS@
+GNUCASH_ENGINE_CFLAGS = @GNUCASH_ENGINE_CFLAGS@
+GNUCASH_ENGINE_LIBS = @GNUCASH_ENGINE_LIBS@
+GNUCASH_GNOME_UTILS_CFLAGS = @GNUCASH_GNOME_UTILS_CFLAGS@
+GNUCASH_GNOME_UTILS_LIBS = @GNUCASH_GNOME_UTILS_LIBS@
+GNUCASH_MAJOR_VERSION = @GNUCASH_MAJOR_VERSION@
+GNUCASH_MICRO_VERSION = @GNUCASH_MICRO_VERSION@
+GNUCASH_MINOR_VERSION = @GNUCASH_MINOR_VERSION@
+GNUCASH_NETWORK_UTILS_CFLAGS = @GNUCASH_NETWORK_UTILS_CFLAGS@
+GNUCASH_NETWORK_UTILS_LIBS = @GNUCASH_NETWORK_UTILS_LIBS@
+GNUCASH_REGISTER_CORE_CFLAGS = @GNUCASH_REGISTER_CORE_CFLAGS@
+GNUCASH_REGISTER_CORE_LIBS = @GNUCASH_REGISTER_CORE_LIBS@
+GNUCASH_SEPARATE_BUILDDIR_FALSE = @GNUCASH_SEPARATE_BUILDDIR_FALSE@
+GNUCASH_SEPARATE_BUILDDIR_TRUE = @GNUCASH_SEPARATE_BUILDDIR_TRUE@
+GOBJECT_QUERY = @GOBJECT_QUERY@
+GSF_CFLAGS = @GSF_CFLAGS@
+GSF_LIBS = @GSF_LIBS@
+GTKHTML_CFLAGS = @GTKHTML_CFLAGS@
+GTKHTML_LIBS = @GTKHTML_LIBS@
+GTK_CFLAGS = @GTK_CFLAGS@
+GTK_LIBS = @GTK_LIBS@
+GTK_XIM_FLAGS = @GTK_XIM_FLAGS@
+GUILE = @GUILE@
+GUILE_FALSE = @GUILE_FALSE@
+GUILE_INCS = @GUILE_INCS@
+GUILE_LIBS = @GUILE_LIBS@
+GUILE_TRUE = @GUILE_TRUE@
+G_WRAP_COMPILE_ARGS = @G_WRAP_COMPILE_ARGS@
+G_WRAP_CONFIG = @G_WRAP_CONFIG@
+G_WRAP_LIB_DIR = @G_WRAP_LIB_DIR@
+G_WRAP_LINK_ARGS = @G_WRAP_LINK_ARGS@
+G_WRAP_MODULE_DIR = @G_WRAP_MODULE_DIR@
+HAVE_GLIB26_FALSE = @HAVE_GLIB26_FALSE@
+HAVE_GLIB26_TRUE = @HAVE_GLIB26_TRUE@
+HBCI_CFLAGS = @HBCI_CFLAGS@
+HBCI_DIR = @HBCI_DIR@
+HBCI_LIBS = @HBCI_LIBS@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INSTOBJEXT = @INSTOBJEXT@
+INTLLIBS = @INTLLIBS@
+INTLTOOL_CAVES_RULE = @INTLTOOL_CAVES_RULE@
+INTLTOOL_DESKTOP_RULE = @INTLTOOL_DESKTOP_RULE@
+INTLTOOL_DIRECTORY_RULE = @INTLTOOL_DIRECTORY_RULE@
+INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@
+INTLTOOL_ICONV = @INTLTOOL_ICONV@
+INTLTOOL_KBD_RULE = @INTLTOOL_KBD_RULE@
+INTLTOOL_KEYS_RULE = @INTLTOOL_KEYS_RULE@
+INTLTOOL_MERGE = @INTLTOOL_MERGE@
+INTLTOOL_MSGFMT = @INTLTOOL_MSGFMT@
+INTLTOOL_MSGMERGE = @INTLTOOL_MSGMERGE@
+INTLTOOL_OAF_RULE = @INTLTOOL_OAF_RULE@
+INTLTOOL_PERL = @INTLTOOL_PERL@
+INTLTOOL_PONG_RULE = @INTLTOOL_PONG_RULE@
+INTLTOOL_PROP_RULE = @INTLTOOL_PROP_RULE@
+INTLTOOL_SCHEMAS_RULE = @INTLTOOL_SCHEMAS_RULE@
+INTLTOOL_SERVER_RULE = @INTLTOOL_SERVER_RULE@
+INTLTOOL_SHEET_RULE = @INTLTOOL_SHEET_RULE@
+INTLTOOL_SOUNDLIST_RULE = @INTLTOOL_SOUNDLIST_RULE@
+INTLTOOL_THEME_RULE = @INTLTOOL_THEME_RULE@
+INTLTOOL_UI_RULE = @INTLTOOL_UI_RULE@
+INTLTOOL_UPDATE = @INTLTOOL_UPDATE@
+INTLTOOL_XAM_RULE = @INTLTOOL_XAM_RULE@
+INTLTOOL_XGETTEXT = @INTLTOOL_XGETTEXT@
+INTLTOOL_XML_NOMERGE_RULE = @INTLTOOL_XML_NOMERGE_RULE@
+INTLTOOL_XML_RULE = @INTLTOOL_XML_RULE@
+LC_MESSAGES_ENUM = @LC_MESSAGES_ENUM@
+LDFLAGS = @LDFLAGS@
+LIBGOFFICE_CFLAGS = @LIBGOFFICE_CFLAGS@
+LIBGOFFICE_LIBS = @LIBGOFFICE_LIBS@
+LIBGUPPI_CFLAGS = @LIBGUPPI_CFLAGS@
+LIBGUPPI_LIBS = @LIBGUPPI_LIBS@
+LIBOBJS = @LIBOBJS@
+LIBOBJS_SEDSCRIPT = @LIBOBJS_SEDSCRIPT@
+LIBOFX_CFLAGS = @LIBOFX_CFLAGS@
+LIBOFX_LIBS = @LIBOFX_LIBS@
+LIBQOF_BACKEND_QSF_LIBRARY_VERSION = @LIBQOF_BACKEND_QSF_LIBRARY_VERSION@
+LIBQOF_LIBRARY_VERSION = @LIBQOF_LIBRARY_VERSION@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIBTOOL_DEPS = @LIBTOOL_DEPS@
+LIBXML2_CFLAGS = @LIBXML2_CFLAGS@
+LIBXML2_LIBS = @LIBXML2_LIBS@
+LIBXML_VERSION = @LIBXML_VERSION@
+LN_S = @LN_S@
+LOCALE_DIR = @LOCALE_DIR@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
+MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
+MAKEINFO = @MAKEINFO@
+MKINSTALLDIRS = @MKINSTALLDIRS@
+MSGFMT = @MSGFMT@
+MT940_DIR = @MT940_DIR@
+OBJEXT = @OBJEXT@
+OFX_DIR = @OFX_DIR@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PERL = @PERL@
+PERLINCL = @PERLINCL@
+PGSQL_CFLAGS = @PGSQL_CFLAGS@
+PGSQL_LIBS = @PGSQL_LIBS@
+PKG_CONFIG = @PKG_CONFIG@
+POFILES = @POFILES@
+POSUB = @POSUB@
+PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@
+PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@
+PRINT_CFLAGS = @PRINT_CFLAGS@
+PRINT_LIBS = @PRINT_LIBS@
+QOF_CFLAGS = @QOF_CFLAGS@
+QOF_LIBS = @QOF_LIBS@
+QOF_LIB_DIR = @QOF_LIB_DIR@
+QOF_PREFIX = @QOF_PREFIX@
+QSF_SCHEMA_DIR = @QSF_SCHEMA_DIR@
+QTTHREADS_LIB = @QTTHREADS_LIB@
+RANLIB = @RANLIB@
+READLINE_LIB = @READLINE_LIB@
+RPC_DIR = @RPC_DIR@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SQL_DIR = @SQL_DIR@
+STRIP = @STRIP@
+TERMCAP_LIB = @TERMCAP_LIB@
+USE_LIBGOFFICE = @USE_LIBGOFFICE@
+USE_LIBGOFFICE_FALSE = @USE_LIBGOFFICE_FALSE@
+USE_LIBGOFFICE_TRUE = @USE_LIBGOFFICE_TRUE@
+USE_LIBQOF = @USE_LIBQOF@
+USE_LIBQOF_FALSE = @USE_LIBQOF_FALSE@
+USE_LIBQOF_TRUE = @USE_LIBQOF_TRUE@
+USE_NLS = @USE_NLS@
+VERSION = @VERSION@
+WITH_GNOME_FALSE = @WITH_GNOME_FALSE@
+WITH_GNOME_TRUE = @WITH_GNOME_TRUE@
+WITH_GTK_FALSE = @WITH_GTK_FALSE@
+WITH_GTK_TRUE = @WITH_GTK_TRUE@
+XGETTEXT = @XGETTEXT@
+XML_CFLAGS = @XML_CFLAGS@
+XML_LIBS = @XML_LIBS@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_F77 = @ac_ct_F77@
+ac_ct_RANLIB = @ac_ct_RANLIB@
+ac_ct_STRIP = @ac_ct_STRIP@
+ac_pt_PKG_CONFIG = @ac_pt_PKG_CONFIG@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
+am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+aqbanking_data = @aqbanking_data@
+aqbanking_dir = @aqbanking_dir@
+aqbanking_includes = @aqbanking_includes@
+aqbanking_libs = @aqbanking_libs@
+aqbanking_libspp = @aqbanking_libspp@
+aqbanking_plugins = @aqbanking_plugins@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+cflags_set = @cflags_set@
+datadir = @datadir@
+enable_dot = @enable_dot@
+enable_html_docs = @enable_html_docs@
+enable_latex_docs = @enable_latex_docs@
+exec_prefix = @exec_prefix@
+gnumeric_icondir = @gnumeric_icondir@
+gnumeric_plugindir = @gnumeric_plugindir@
+gog_plugindir = @gog_plugindir@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+subdirs = @subdirs@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+ at BUILD_XML_FALSE@SUBDIRS = man
+ at BUILD_XML_TRUE@SUBDIRS = xml man
+
+EXTRA_DIST = doxygen.cfg.in
+subdir = cashutil/doc
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+DIST_SOURCES =
+
+RECURSIVE_TARGETS = info-recursive dvi-recursive pdf-recursive \
+ ps-recursive install-info-recursive uninstall-info-recursive \
+ all-recursive install-data-recursive install-exec-recursive \
+ installdirs-recursive install-recursive uninstall-recursive \
+ check-recursive installcheck-recursive
+DIST_COMMON = $(srcdir)/Makefile.in Makefile.am
+DIST_SUBDIRS = man xml
+all: all-recursive
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --gnu cashutil/doc/Makefile
+Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)
+
+mostlyclean-libtool:
+ -rm -f *.lo
+
+clean-libtool:
+ -rm -rf .libs _libs
+
+distclean-libtool:
+ -rm -f libtool
+uninstall-info-am:
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+# (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+ @set fnord $$MAKEFLAGS; amf=$$2; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+ @set fnord $$MAKEFLAGS; amf=$$2; \
+ dot_seen=no; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ rev=''; for subdir in $$list; do \
+ if test "$$subdir" = "."; then :; else \
+ rev="$$subdir $$rev"; \
+ fi; \
+ done; \
+ rev="$$rev ."; \
+ target=`echo $@ | sed s/-recursive//`; \
+ for subdir in $$rev; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+ done && test -z "$$fail"
+tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+ done
+ctags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+ done
+
+ETAGS = etags
+ETAGSFLAGS =
+
+CTAGS = ctags
+CTAGSFLAGS =
+
+tags: TAGS
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ mkid -fID $$unique
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ if (etags --etags-include --version) >/dev/null 2>&1; then \
+ include_option=--etags-include; \
+ else \
+ include_option=--include; \
+ fi; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test -f $$subdir/TAGS && \
+ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(ETAGS_ARGS)$$tags$$unique" \
+ || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$tags $$unique
+
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$tags $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && cd $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+
+top_distdir = ../..
+distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+ list='$(DISTFILES)'; for file in $$list; do \
+ case $$file in \
+ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+ esac; \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+ dir="/$$dir"; \
+ $(mkinstalldirs) "$(distdir)$$dir"; \
+ else \
+ dir=''; \
+ fi; \
+ if test -d $$d/$$file; then \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ else \
+ test -f $(distdir)/$$file \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
+ fi; \
+ done
+ list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test -d $(distdir)/$$subdir \
+ || mkdir $(distdir)/$$subdir \
+ || exit 1; \
+ (cd $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$(top_distdir)" \
+ distdir=../$(distdir)/$$subdir \
+ distdir) \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+check: check-recursive
+all-am: Makefile
+installdirs: installdirs-recursive
+installdirs-am:
+
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-recursive
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-libtool \
+ distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-recursive
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-info-am
+
+uninstall-info: uninstall-info-recursive
+
+.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-am clean \
+ clean-generic clean-libtool clean-recursive ctags \
+ ctags-recursive distclean distclean-generic distclean-libtool \
+ distclean-recursive distclean-tags distdir dvi dvi-am \
+ dvi-recursive info info-am info-recursive install install-am \
+ install-data install-data-am install-data-recursive \
+ install-exec install-exec-am install-exec-recursive \
+ install-info install-info-am install-info-recursive install-man \
+ install-recursive install-strip installcheck installcheck-am \
+ installdirs installdirs-am installdirs-recursive \
+ maintainer-clean maintainer-clean-generic \
+ maintainer-clean-recursive mostlyclean mostlyclean-generic \
+ mostlyclean-libtool mostlyclean-recursive pdf pdf-am \
+ pdf-recursive ps ps-am ps-recursive tags tags-recursive \
+ uninstall uninstall-am uninstall-info-am \
+ uninstall-info-recursive uninstall-recursive
+
+
+all:
+
+doc: doxygen.cfg
+ rm -rf html refman.pdf
+ doxygen doxygen.cfg
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
Added: gnucash/branches/cashutil/cashutil/doc/doxygen.cfg.in
===================================================================
--- gnucash/branches/cashutil/cashutil/doc/doxygen.cfg.in 2005-11-03 11:03:19 UTC (rev 11802)
+++ gnucash/branches/cashutil/cashutil/doc/doxygen.cfg.in 2005-11-03 11:07:13 UTC (rev 11803)
@@ -0,0 +1,1117 @@
+# Doxyfile 1.3.6-20040222
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project
+#
+# All text after a hash (#) is considered a comment and will be ignored
+# The format is:
+# TAG = value [value, ...]
+# For lists items can also be appended using:
+# TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (" ")
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
+# by quotes) that should identify the project.
+
+PROJECT_NAME = cashutil
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number.
+# This could be handy for archiving the generated documentation or
+# if some version control system is used.
+
+PROJECT_NUMBER = @VERSION@
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
+# base path where the generated documentation will be put.
+# If a relative path is entered, it will be relative to the location
+# where doxygen was started. If left blank the current directory will be used.
+
+OUTPUT_DIRECTORY =
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# The default language is English, other supported languages are:
+# Brazilian, Catalan, Chinese, Chinese-Traditional, Croatian, Czech, Danish, Dutch,
+# Finnish, French, German, Greek, Hungarian, Italian, Japanese, Japanese-en
+# (Japanese with English messages), Korean, Korean-en, Norwegian, Polish, Portuguese,
+# Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish, and Ukrainian.
+
+OUTPUT_LANGUAGE = English
+
+# This tag can be used to specify the encoding used in the generated output.
+# The encoding is not always determined by the language that is chosen,
+# but also whether or not the output is meant for Windows or non-Windows users.
+# In case there is a difference, setting the USE_WINDOWS_ENCODING tag to YES
+# forces the Windows encoding (this is the default for the Windows binary),
+# whereas setting the tag to NO uses a Unix-style encoding (the default for
+# all platforms other than Windows).
+
+USE_WINDOWS_ENCODING = NO
+
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
+# include brief member descriptions after the members that are listed in
+# the file and class documentation (similar to JavaDoc).
+# Set to NO to disable this.
+
+BRIEF_MEMBER_DESC = YES
+
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
+# the brief description of a member or function before the detailed description.
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+
+REPEAT_BRIEF = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator
+# that is used to form the text in various listings. Each string
+# in this list, if found as the leading text of the brief description, will be
+# stripped from the text and the result after processing the whole list, is used
+# as the annotated text. Otherwise, the brief description is used as-is. If left
+# blank, the following values are used ("$name" is automatically replaced with the
+# name of the entity): "The $name class" "The $name widget" "The $name file"
+# "is" "provides" "specifies" "contains" "represents" "a" "an" "the"
+
+ABBREVIATE_BRIEF =
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# Doxygen will generate a detailed section even if there is only a brief
+# description.
+
+ALWAYS_DETAILED_SEC = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all inherited
+# members of a class in the documentation of that class as if those members were
+# ordinary class members. Constructors, destructors and assignment operators of
+# the base classes will not be shown.
+
+INLINE_INHERITED_MEMB = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
+# path before files name in the file list and in the header files. If set
+# to NO the shortest path that makes the file name unique will be used.
+
+FULL_PATH_NAMES = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
+# can be used to strip a user-defined part of the path. Stripping is
+# only done if one of the specified strings matches the left-hand part of
+# the path. It is allowed to use relative paths in the argument list.
+# If left blank the directory from which doxygen is run is used as the
+# path to strip.
+
+STRIP_FROM_PATH =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
+# (but less readable) file names. This can be useful is your file systems
+# doesn't support long names like on DOS, Mac, or CD-ROM.
+
+SHORT_NAMES = NO
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
+# will interpret the first line (until the first dot) of a JavaDoc-style
+# comment as the brief description. If set to NO, the JavaDoc
+# comments will behave just like the Qt-style comments (thus requiring an
+# explicit @brief command for a brief description.
+
+JAVADOC_AUTOBRIEF = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
+# treat a multi-line C++ special comment block (i.e. a block of //! or ///
+# comments) as a brief description. This used to be the default behaviour.
+# The new default is to treat a multi-line C++ comment block as a detailed
+# description. Set this tag to YES if you prefer the old behaviour instead.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the DETAILS_AT_TOP tag is set to YES then Doxygen
+# will output the detailed description near the top, like JavaDoc.
+# If set to NO, the detailed description appears after the member
+# documentation.
+
+DETAILS_AT_TOP = YES
+
+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
+# member inherits the documentation from any documented member that it
+# re-implements.
+
+INHERIT_DOCS = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES, then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+
+DISTRIBUTE_GROUP_DOC = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab.
+# Doxygen uses this value to replace tabs by spaces in code fragments.
+
+TAB_SIZE = 8
+
+# This tag can be used to specify a number of aliases that acts
+# as commands in the documentation. An alias has the form "name=value".
+# For example adding "sideeffect=\par Side Effects:\n" will allow you to
+# put the command \sideeffect (or @sideeffect) in the documentation, which
+# will result in a user-defined paragraph with heading "Side Effects:".
+# You can put \n's in the value part of an alias to insert newlines.
+
+ALIASES =
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
+# only. Doxygen will then generate output that is more tailored for C.
+# For instance, some of the names that are used will be different. The list
+# of all members will be omitted, etc.
+
+OPTIMIZE_OUTPUT_FOR_C = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java sources
+# only. Doxygen will then generate output that is more tailored for Java.
+# For instance, namespaces will be presented as packages, qualified scopes
+# will look different, etc.
+
+OPTIMIZE_OUTPUT_JAVA = NO
+
+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
+# the same type (for instance a group of public functions) to be put as a
+# subgroup of that type (e.g. under the Public Functions section). Set it to
+# NO to prevent subgrouping. Alternatively, this can be done per class using
+# the \nosubgrouping command.
+
+SUBGROUPING = YES
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
+# documentation are documented, even if no documentation was available.
+# Private class members and static file members will be hidden unless
+# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
+
+EXTRACT_ALL = NO
+
+# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
+# will be included in the documentation.
+
+EXTRACT_PRIVATE = NO
+
+# If the EXTRACT_STATIC tag is set to YES all static members of a file
+# will be included in the documentation.
+
+EXTRACT_STATIC = YES
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
+# defined locally in source files will be included in the documentation.
+# If set to NO only classes defined in header files are included.
+
+EXTRACT_LOCAL_CLASSES = YES
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
+# undocumented members of documented classes, files or namespaces.
+# If set to NO (the default) these members will be included in the
+# various overviews, but no documentation section is generated.
+# This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_MEMBERS = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy.
+# If set to NO (the default) these classes will be included in the various
+# overviews. This option has no effect if EXTRACT_ALL is enabled.
+
+HIDE_UNDOC_CLASSES = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
+# friend (class|struct|union) declarations.
+# If set to NO (the default) these declarations will be included in the
+# documentation.
+
+HIDE_FRIEND_COMPOUNDS = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
+# documentation blocks found inside the body of a function.
+# If set to NO (the default) these blocks will be appended to the
+# function's detailed documentation block.
+
+HIDE_IN_BODY_DOCS = NO
+
+# The INTERNAL_DOCS tag determines if documentation
+# that is typed after a \internal command is included. If the tag is set
+# to NO (the default) then the documentation will be excluded.
+# Set it to YES to include the internal documentation.
+
+INTERNAL_DOCS = NO
+
+# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
+# file names in lower-case letters. If set to YES upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# users are advised to set this option to NO.
+
+CASE_SENSE_NAMES = YES
+
+# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
+# will show members with their full class and namespace scopes in the
+# documentation. If set to YES the scope will be hidden.
+
+HIDE_SCOPE_NAMES = NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
+# will put a list of the files that are included by a file in the documentation
+# of that file.
+
+SHOW_INCLUDE_FILES = YES
+
+# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
+# is inserted in the documentation for inline members.
+
+INLINE_INFO = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
+# will sort the (detailed) documentation of file and class members
+# alphabetically by member name. If set to NO the members will appear in
+# declaration order.
+
+SORT_MEMBER_DOCS = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
+# brief documentation of file, namespace and class members alphabetically
+# by member name. If set to NO (the default) the members will appear in
+# declaration order.
+
+SORT_BRIEF_DOCS = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
+# sorted by fully-qualified names, including namespaces. If set to
+# NO (the default), the class list will be sorted only by class name,
+# not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the
+# alphabetical list.
+
+SORT_BY_SCOPE_NAME = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or
+# disable (NO) the todo list. This list is created by putting \todo
+# commands in the documentation.
+
+GENERATE_TODOLIST = YES
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or
+# disable (NO) the test list. This list is created by putting \test
+# commands in the documentation.
+
+GENERATE_TESTLIST = NO
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or
+# disable (NO) the bug list. This list is created by putting \bug
+# commands in the documentation.
+
+GENERATE_BUGLIST = NO
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
+# disable (NO) the deprecated list. This list is created by putting
+# \deprecated commands in the documentation.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional
+# documentation sections, marked by \if sectionname ... \endif.
+
+ENABLED_SECTIONS =
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
+# the initial value of a variable or define consists of for it to appear in
+# the documentation. If the initializer consists of more lines than specified
+# here it will be hidden. Use a value of 0 to hide initializers completely.
+# The appearance of the initializer of individual variables and defines in the
+# documentation can be controlled using \showinitializer or \hideinitializer
+# command in the documentation regardless of this setting.
+
+MAX_INITIALIZER_LINES = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
+# at the bottom of the documentation of classes and structs. If set to YES the
+# list will mention the files that were used to generate the documentation.
+
+SHOW_USED_FILES = YES
+
+#---------------------------------------------------------------------------
+# configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated
+# by doxygen. Possible values are YES and NO. If left blank NO is used.
+
+QUIET = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated by doxygen. Possible values are YES and NO. If left blank
+# NO is used.
+
+WARNINGS = YES
+
+# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
+# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
+# automatically be disabled.
+
+WARN_IF_UNDOCUMENTED = YES
+
+# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some
+# parameters in a documented function, or documenting parameters that
+# don't exist or using markup commands wrongly.
+
+WARN_IF_DOC_ERROR = YES
+
+# The WARN_FORMAT tag determines the format of the warning messages that
+# doxygen can produce. The string should contain the $file, $line, and $text
+# tags, which will be replaced by the file and line number from which the
+# warning originated and the warning text.
+
+WARN_FORMAT =
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning
+# and error messages should be written. If left blank the output is written
+# to stderr.
+
+WARN_LOGFILE = doxygen.log
+
+#---------------------------------------------------------------------------
+# configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag can be used to specify the files and/or directories that contain
+# documented source files. You may enter file names like "myfile.cpp" or
+# directories like "/usr/src/myproject". Separate the files or directories
+# with spaces.
+
+INPUT = . ../src
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank the following patterns are tested:
+# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx *.hpp
+# *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm
+
+FILE_PATTERNS = *.h *.c *.txt
+
+# The RECURSIVE tag can be used to turn specify whether or not subdirectories
+# should be searched for input files as well. Possible values are YES and NO.
+# If left blank NO is used.
+
+RECURSIVE = YES
+
+# The EXCLUDE tag can be used to specify files and/or directories that should
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+
+EXCLUDE =
+
+# The EXCLUDE_SYMLINKS tag can be used select whether or not files or directories
+# that are symbolic links (a Unix filesystem feature) are excluded from the input.
+
+EXCLUDE_SYMLINKS = YES
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories.
+
+EXCLUDE_PATTERNS = *P.h
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or
+# directories that contain example code fragments that are included (see
+# the \include command).
+
+EXAMPLE_PATH =
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
+# and *.h) to filter out the source-files in the directories. If left
+# blank all files are included.
+
+EXAMPLE_PATTERNS =
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude
+# commands irrespective of the value of the RECURSIVE tag.
+# Possible values are YES and NO. If left blank NO is used.
+
+EXAMPLE_RECURSIVE = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or
+# directories that contain image that are included in the documentation (see
+# the \image command).
+
+IMAGE_PATH =
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command <filter> <input-file>, where <filter>
+# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
+# input file. Doxygen will then use the output that the filter program writes
+# to standard output.
+
+INPUT_FILTER =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will be used to filter the input files when producing source
+# files to browse (i.e. when SOURCE_BROWSER is set to YES).
+
+FILTER_SOURCE_FILES = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will
+# be generated. Documented entities will be cross-referenced with these sources.
+# Note: To get rid of all source code in the generated output, make sure also
+# VERBATIM_HEADERS is set to NO.
+
+SOURCE_BROWSER = YES
+
+# Setting the INLINE_SOURCES tag to YES will include the body
+# of functions and classes directly in the documentation.
+
+INLINE_SOURCES = YES
+
+# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
+# doxygen to hide any special comment blocks from generated source code
+# fragments. Normal C and C++ comments will always remain visible.
+
+STRIP_CODE_COMMENTS = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES (the default)
+# then for each documented function all documented
+# functions referencing it will be listed.
+
+REFERENCED_BY_RELATION = YES
+
+# If the REFERENCES_RELATION tag is set to YES (the default)
+# then for each documented function all documented entities
+# called/used by that function will be listed.
+
+REFERENCES_RELATION = YES
+
+# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
+# will generate a verbatim copy of the header file for each class for
+# which an include is specified. Set to NO to disable this.
+
+VERBATIM_HEADERS = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
+# of all compounds will be generated. Enable this if the project
+# contains a lot of classes, structs, unions or interfaces.
+
+ALPHABETICAL_INDEX = YES
+
+# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
+# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
+# in which this list will be split (can be a number in the range [1..20])
+
+COLS_IN_ALPHA_INDEX = 5
+
+# In case all classes in a project start with a common prefix, all
+# classes will be put under the same header in the alphabetical index.
+# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
+# should be ignored while generating the index headers.
+
+IGNORE_PREFIX =
+
+#---------------------------------------------------------------------------
+# configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
+# generate HTML output.
+
+GENERATE_HTML = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `html' will be used as the default path.
+
+HTML_OUTPUT =
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
+# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
+# doxygen will generate files with .html extension.
+
+HTML_FILE_EXTENSION =
+
+# The HTML_HEADER tag can be used to specify a personal HTML header for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard header.
+
+HTML_HEADER =
+
+# The HTML_FOOTER tag can be used to specify a personal HTML footer for
+# each generated HTML page. If it is left blank doxygen will generate a
+# standard footer.
+
+HTML_FOOTER =
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
+# style sheet that is used by each HTML page. It can be used to
+# fine-tune the look of the HTML output. If the tag is left blank doxygen
+# will generate a default style sheet. Note that doxygen will try to copy
+# the style sheet file to the HTML output directory, so don't put your own
+# stylesheet in the HTML output directory as well, or it will be erased!
+
+HTML_STYLESHEET =
+
+# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
+# files or namespaces will be aligned in HTML using tables. If set to
+# NO a bullet list will be used.
+
+HTML_ALIGN_MEMBERS = YES
+
+# If the GENERATE_HTMLHELP tag is set to YES, additional index files
+# will be generated that can be used as input for tools like the
+# Microsoft HTML help workshop to generate a compressed HTML help file (.chm)
+# of the generated HTML documentation.
+
+GENERATE_HTMLHELP = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
+# be used to specify the file name of the resulting .chm file. You
+# can add a path in front of the file if the result should not be
+# written to the html output directory.
+
+CHM_FILE =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
+# be used to specify the location (absolute path including file name) of
+# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
+# the HTML help compiler on the generated index.hhp.
+
+HHC_LOCATION =
+
+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
+# controls if a separate .chi index file is generated (YES) or that
+# it should be included in the master .chm file (NO).
+
+GENERATE_CHI = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
+# controls whether a binary table of contents is generated (YES) or a
+# normal table of contents (NO) in the .chm file.
+
+BINARY_TOC = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members
+# to the contents of the HTML help documentation and to the tree view.
+
+TOC_EXPAND = NO
+
+# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
+# top of each HTML page. The value NO (the default) enables the index and
+# the value YES disables it.
+
+DISABLE_INDEX = NO
+
+# This tag can be used to set the number of enum values (range [1..20])
+# that doxygen will group on one line in the generated HTML documentation.
+
+ENUM_VALUES_PER_LINE = 4
+
+# If the GENERATE_TREEVIEW tag is set to YES, a side panel will be
+# generated containing a tree-like index structure (just like the one that
+# is generated for HTML Help). For this to work a browser that supports
+# JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+,
+# Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are
+# probably better off using the HTML help feature.
+
+GENERATE_TREEVIEW = NO
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
+# used to set the initial width (in pixels) of the frame in which the tree
+# is shown.
+
+TREEVIEW_WIDTH = 250
+
+#---------------------------------------------------------------------------
+# configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
+# generate Latex output.
+
+GENERATE_LATEX = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `latex' will be used as the default path.
+
+LATEX_OUTPUT =
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked. If left blank `latex' will be used as the default command name.
+
+LATEX_CMD_NAME =
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
+# generate index for LaTeX. If left blank `makeindex' will be used as the
+# default command name.
+
+MAKEINDEX_CMD_NAME =
+
+# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
+# LaTeX documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_LATEX = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used
+# by the printer. Possible values are: a4, a4wide, letter, legal and
+# executive. If left blank a4wide will be used.
+
+PAPER_TYPE = letter
+
+# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
+# packages that should be included in the LaTeX output.
+
+EXTRA_PACKAGES =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
+# the generated latex document. The header should contain everything until
+# the first chapter. If it is left blank doxygen will generate a
+# standard header. Notice: only use this tag if you know what you are doing!
+
+LATEX_HEADER =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
+# is prepared for conversion to pdf (using ps2pdf). The pdf file will
+# contain links (just like the HTML output) instead of page references
+# This makes the output suitable for online browsing using a pdf viewer.
+
+PDF_HYPERLINKS = YES
+
+# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
+# plain latex in the generated Makefile. Set this option to YES to get a
+# higher quality PDF documentation.
+
+USE_PDFLATEX = YES
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
+# command to the generated LaTeX files. This will instruct LaTeX to keep
+# running if errors occur, instead of asking the user for help.
+# This option is also used when generating formulas in HTML.
+
+LATEX_BATCHMODE = NO
+
+# If LATEX_HIDE_INDICES is set to YES then doxygen will not
+# include the index chapters (such as File Index, Compound Index, etc.)
+# in the output.
+
+LATEX_HIDE_INDICES = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
+# The RTF output is optimized for Word 97 and may not look very pretty with
+# other RTF readers or editors.
+
+GENERATE_RTF = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `rtf' will be used as the default path.
+
+RTF_OUTPUT =
+
+# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
+# RTF documents. This may be useful for small projects and may help to
+# save some trees in general.
+
+COMPACT_RTF = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
+# will contain hyperlink fields. The RTF file will
+# contain links (just like the HTML output) instead of page references.
+# This makes the output suitable for online browsing using WORD or other
+# programs which support those fields.
+# Note: wordpad (write) and others do not support links.
+
+RTF_HYPERLINKS = NO
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's
+# config file, i.e. a series of assignments. You only have to provide
+# replacements, missing definitions are set to their default value.
+
+RTF_STYLESHEET_FILE =
+
+# Set optional variables used in the generation of an rtf document.
+# Syntax is similar to doxygen's config file.
+
+RTF_EXTENSIONS_FILE =
+
+#---------------------------------------------------------------------------
+# configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
+# generate man pages
+
+GENERATE_MAN = YES
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `man' will be used as the default path.
+
+MAN_OUTPUT =
+
+# The MAN_EXTENSION tag determines the extension that is added to
+# the generated man pages (default is the subroutine's section .3)
+
+MAN_EXTENSION =
+
+# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
+# then it will generate one additional man file for each entity
+# documented in the real man page(s). These additional files
+# only source the real man page, but without them the man command
+# would be unable to find the correct page. The default is NO.
+
+MAN_LINKS = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES Doxygen will
+# generate an XML file that captures the structure of
+# the code including all documentation.
+
+GENERATE_XML = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be
+# put in front of it. If left blank `xml' will be used as the default path.
+
+XML_OUTPUT = xml
+
+# The XML_SCHEMA tag can be used to specify an XML schema,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_SCHEMA =
+
+# The XML_DTD tag can be used to specify an XML DTD,
+# which can be used by a validating XML parser to check the
+# syntax of the XML files.
+
+XML_DTD =
+
+# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
+# dump the program listings (including syntax highlighting
+# and cross-referencing information) to the XML output. Note that
+# enabling this will significantly increase the size of the XML output.
+
+XML_PROGRAMLISTING = YES
+
+#---------------------------------------------------------------------------
+# configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
+# generate an AutoGen Definitions (see autogen.sf.net) file
+# that captures the structure of the code including all
+# documentation. Note that this feature is still experimental
+# and incomplete at the moment.
+
+GENERATE_AUTOGEN_DEF = NO
+
+#---------------------------------------------------------------------------
+# configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES Doxygen will
+# generate a Perl module file that captures the structure of
+# the code including all documentation. Note that this
+# feature is still experimental and incomplete at the
+# moment.
+
+GENERATE_PERLMOD = NO
+
+# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
+# the necessary Makefile rules, Perl scripts and LaTeX code to be able
+# to generate PDF and DVI output from the Perl module output.
+
+PERLMOD_LATEX = NO
+
+# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
+# nicely formatted so it can be parsed by a human reader. This is useful
+# if you want to understand what is going on. On the other hand, if this
+# tag is set to NO the size of the Perl module output will be much smaller
+# and Perl will parse it just the same.
+
+PERLMOD_PRETTY = YES
+
+# The names of the make variables in the generated doxyrules.make file
+# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
+# This is useful so different doxyrules.make files included by the same
+# Makefile don't overwrite each other's variables.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
+# evaluate all C-preprocessor directives found in the sources and include
+# files.
+
+ENABLE_PREPROCESSING = YES
+
+# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
+# names in the source code. If set to NO (the default) only conditional
+# compilation will be performed. Macro expansion can be done in a controlled
+# way by setting EXPAND_ONLY_PREDEF to YES.
+
+MACRO_EXPANSION = YES
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
+# then the macro expansion is limited to the macros specified with the
+# PREDEFINED and EXPAND_AS_PREDEFINED tags.
+
+EXPAND_ONLY_PREDEF = NO
+
+# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
+# in the INCLUDE_PATH (see below) will be search if a #include is found.
+
+SEARCH_INCLUDES = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by
+# the preprocessor.
+
+INCLUDE_PATH = @QOF_PREFIX@/include/qof/
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will
+# be used.
+
+INCLUDE_FILE_PATTERNS =
+
+# The PREDEFINED tag can be used to specify one or more macro names that
+# are defined before the preprocessor is started (similar to the -D option of
+# gcc). The argument of the tag is a list of macros of the form: name
+# or name=definition (no spaces). If the definition and the = are
+# omitted =1 is assumed.
+
+PREDEFINED =
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
+# this tag can be used to specify a list of macro names that should be expanded.
+# The macro definition that is found in the sources will be used.
+# Use the PREDEFINED tag if you want to use a different macro definition.
+
+EXPAND_AS_DEFINED =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
+# doxygen's preprocessor will remove all function-like macros that are alone
+# on a line, have an all uppercase name, and do not end with a semicolon. Such
+# function macros are typically used for boiler-plate code, and will confuse the
+# parser if not removed.
+
+SKIP_FUNCTION_MACROS = YES
+
+#---------------------------------------------------------------------------
+# Configuration::additions related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES option can be used to specify one or more tagfiles.
+# Optionally an initial location of the external documentation
+# can be added for each tagfile. The format of a tag file without
+# this location is as follows:
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where "loc1" and "loc2" can be relative or absolute paths or
+# URLs. If a location is present for each tag, the installdox tool
+# does not have to be run to correct the links.
+# Note that each tag file must have a unique name
+# (where the name does NOT include the path)
+# If a tag file is not located in the directory in which doxygen
+# is run, you must also specify the path to the tagfile here.
+
+TAGFILES =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create
+# a tag file that is based on the input files it reads.
+
+GENERATE_TAGFILE =
+
+# If the ALLEXTERNALS tag is set to YES all external classes will be listed
+# in the class index. If set to NO only the inherited external classes
+# will be listed.
+
+ALLEXTERNALS = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will
+# be listed.
+
+EXTERNAL_GROUPS = YES
+
+# The PERL_PATH should be the absolute path and name of the perl script
+# interpreter (i.e. the result of `which perl').
+
+PERL_PATH =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
+# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base or
+# super classes. Setting the tag to NO turns the diagrams off. Note that this
+# option is superseded by the HAVE_DOT option below. This is only a fallback. It is
+# recommended to install and use dot, since it yields more powerful graphs.
+
+CLASS_DIAGRAMS = YES
+
+# If set to YES, the inheritance and collaboration graphs will hide
+# inheritance and usage relations if the target is undocumented
+# or is not a class.
+
+HIDE_UNDOC_RELATIONS = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz, a graph visualization
+# toolkit from AT&T and Lucent Bell Labs. The other options in this section
+# have no effect if this option is set to NO (the default)
+
+HAVE_DOT = NO
+
+# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect inheritance relations. Setting this tag to YES will force the
+# the CLASS_DIAGRAMS tag to NO.
+
+CLASS_GRAPH = YES
+
+# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
+# will generate a graph for each documented class showing the direct and
+# indirect implementation dependencies (inheritance, containment, and
+# class references variables) of the class with other documented classes.
+
+COLLABORATION_GRAPH = YES
+
+# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+
+UML_LOOK = NO
+
+# If set to YES, the inheritance and collaboration graphs will show the
+# relations between templates and their instances.
+
+TEMPLATE_RELATIONS = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
+# tags are set to YES then doxygen will generate a graph for each documented
+# file showing the direct and indirect include dependencies of the file with
+# other documented files.
+
+INCLUDE_GRAPH = YES
+
+# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
+# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
+# documented header file showing the documented files that directly or
+# indirectly include this file.
+
+INCLUDED_BY_GRAPH = YES
+
+# If the CALL_GRAPH and HAVE_DOT tags are set to YES then doxygen will
+# generate a call dependency graph for every global function or class method.
+# Note that enabling this option will significantly increase the time of a run.
+# So in most cases it will be better to enable call graphs for selected
+# functions only using the \callgraph command.
+
+CALL_GRAPH = NO
+
+# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
+# will graphical hierarchy of all classes instead of a textual one.
+
+GRAPHICAL_HIERARCHY = YES
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot. Possible values are png, jpg, or gif
+# If left blank png will be used.
+
+DOT_IMAGE_FORMAT = png
+
+# The tag DOT_PATH can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found on the path.
+
+DOT_PATH =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the
+# \dotfile command).
+
+DOTFILE_DIRS =
+
+# The MAX_DOT_GRAPH_WIDTH tag can be used to set the maximum allowed width
+# (in pixels) of the graphs generated by dot. If a graph becomes larger than
+# this value, doxygen will try to truncate the graph, so that it fits within
+# the specified constraint. Beware that most browsers cannot cope with very
+# large images.
+
+MAX_DOT_GRAPH_WIDTH = 1024
+
+# The MAX_DOT_GRAPH_HEIGHT tag can be used to set the maximum allows height
+# (in pixels) of the graphs generated by dot. If a graph becomes larger than
+# this value, doxygen will try to truncate the graph, so that it fits within
+# the specified constraint. Beware that most browsers cannot cope with very
+# large images.
+
+MAX_DOT_GRAPH_HEIGHT = 1024
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
+# graphs generated by dot. A depth value of 3 means that only nodes reachable
+# from the root by following a path via at most 3 edges will be shown. Nodes that
+# lay further from the root node will be omitted. Note that setting this option to
+# 1 or 2 may greatly reduce the computation time needed for large code bases. Also
+# note that a graph may be further truncated if the graph's image dimensions are
+# not sufficient to fit the graph (see MAX_DOT_GRAPH_WIDTH and MAX_DOT_GRAPH_HEIGHT).
+# If 0 is used for the depth value (the default), the graph is not depth-constrained.
+
+MAX_DOT_GRAPH_DEPTH = 0
+
+# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
+# generate a legend page explaining the meaning of the various boxes and
+# arrows in the dot generated graphs.
+
+GENERATE_LEGEND = YES
+
+# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
+# remove the intermediate dot files that are used to generate
+# the various graphs.
+
+DOT_CLEANUP = YES
+
+#---------------------------------------------------------------------------
+# Configuration::additions related to the search engine
+#---------------------------------------------------------------------------
+
+# The SEARCHENGINE tag specifies whether or not a search engine should be
+# used. If set to NO the values of all tags below this one will be ignored.
+
+SEARCHENGINE = YES
Added: gnucash/branches/cashutil/cashutil/doc/doxygen_main_page.c
===================================================================
--- gnucash/branches/cashutil/cashutil/doc/doxygen_main_page.c 2005-11-03 11:03:19 UTC (rev 11802)
+++ gnucash/branches/cashutil/cashutil/doc/doxygen_main_page.c 2005-11-03 11:07:13 UTC (rev 11803)
@@ -0,0 +1,36 @@
+/** @mainpage CashUtil
+
+CashUtil is the command line interface for GnuCash - intended to provide
+full access to as many GnuCash features as can be implemented in a command
+line environment. CashUtil supports SQL-type queries and writing results to
+QSF XML to support external report scripts / tools. It also includes the
+prototype QOF interactive shell and limited undo capability.
+
+QOF is Query Object Framework, an established abstraction layer in C that
+enables queries and interchange of complex data - spun-out from GnuCash.
+QSF is the XML file backend for QOF, newly written for this project but using
+a backend framework already in use in GnuCash.
+
+QOF v0.6.0 is required for CashUtil.
+
+CashUtil homepage: http://www.linux.codehelp.co.uk/cashutil/
+
+See also, PilotQOF: http://pilot-qof.sourceforge.net/
+
+For information on QOF, see:
+
+http://qof.sourceforge.net/doxy/
+
+http://qof.sourceforge.net/
+
+For updated information on the latest QOF source, see:
+
+http://code.neil.williamsleesmill.me.uk/doxygen/group__QOF.html
+
+For information on the QOF XML backend, QSF, see:
+
+http://code.neil.williamsleesmill.me.uk/doxygen/group__QSF.html
+
+http://code.neil.williamsleesmill.me.uk/qsf.html
+
+*/
Added: gnucash/branches/cashutil/cashutil/doc/logic.txt
===================================================================
--- gnucash/branches/cashutil/cashutil/doc/logic.txt 2005-11-03 11:03:19 UTC (rev 11802)
+++ gnucash/branches/cashutil/cashutil/doc/logic.txt 2005-11-03 11:07:13 UTC (rev 11803)
@@ -0,0 +1,40 @@
+/** \page logic CashUtil Ancillary Logic
+
+This file represents ideas on how the ancillary logic from
+the GnuCash GUI can be abstracted into CashUtil in a way that
+will benefit other QOF applications.
+
+qof_object_logic_handler(QofObject, func, gpointer)
+Passed a complete QofEntity to check that each parameter
+is logically acceptable for that object and that required
+parameters have acceptable data. e.g. parent accounts.
+
+qof_book_logic_handler(QofBook, func, gpointer)
+Passed a complete book to check hierarchy integrity - scan
+the AccountGroups to make sure all accounts are acceptable.
+
+Each handler is application-specific - not part of QOF itself -
+to allow each handler to pass information to the user in a
+manner consistent with the application.
+
+typedef gboolean (*QofObjectLogicCB) (QofEntity*, gpointer);
+
+typedef gboolean (*QofBookLogicCB) (QofBook*, gpointer);
+
+If not acceptable, the handler should ask the user for missing
+data or corrections and return FALSE upon cancel.
+
+qof_object_logic_register (QofObject, QofObjectLogicCB);
+qof_book_logic_register (QofBook, QofBookLogicCB);
+
+CHANGE:
+
+Make object logic handler part of QofObject - it's an object
+property that is called AFTER all parameters have been set.
+
+Book object handler : called prior to a write operation by
+calling handlers on the collections?
+
+
+
+*/
Added: gnucash/branches/cashutil/cashutil/doc/man/Makefile
===================================================================
--- gnucash/branches/cashutil/cashutil/doc/man/Makefile 2005-11-03 11:03:19 UTC (rev 11802)
+++ gnucash/branches/cashutil/cashutil/doc/man/Makefile 2005-11-03 11:07:13 UTC (rev 11803)
@@ -0,0 +1,542 @@
+# Makefile.in generated by automake 1.7.9 from Makefile.am.
+# cashutil/doc/man/Makefile. Generated from Makefile.in by configure.
+
+# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
+# Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+
+srcdir = .
+top_srcdir = ../../..
+
+pkgdatadir = $(datadir)/gnucash
+pkglibdir = $(libdir)/gnucash
+pkgincludedir = $(includedir)/gnucash
+top_builddir = ../../..
+
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = /usr/bin/install -c
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+host_triplet = i686-pc-linux-gnu
+ACLOCAL = ${SHELL} /opt/working/temp/cashutil/missing --run aclocal-1.7
+AMDEP_FALSE = #
+AMDEP_TRUE =
+AMTAR = ${SHELL} /opt/working/temp/cashutil/missing --run tar
+AR = ar
+ART_CFLAGS = -I/usr/include/libart-2.0
+ART_LIBS = -lart_lgpl_2
+AUTOCONF = ${SHELL} /opt/working/temp/cashutil/missing --run autoconf
+AUTOHEADER = ${SHELL} /opt/working/temp/cashutil/missing --run autoheader
+AUTOMAKE = ${SHELL} /opt/working/temp/cashutil/missing --run automake-1.7
+AWK = gawk
+BUILD_CASHUTIL_FALSE =
+BUILD_CASHUTIL_TRUE = #
+BUILD_GUILE = yes
+CATALOGS = da.gmo de.gmo el.gmo en_GB.gmo es.gmo es_NI.gmo fr.gmo hu.gmo it.gmo ja.gmo nb.gmo nl.gmo pl.gmo pt.gmo pt_BR.gmo ru.gmo rw.gmo sk.gmo sv.gmo ta.gmo uk.gmo zh_CN.gmo zh_TW.gmo
+CATOBJEXT = .gmo
+CC = gcc
+CCDEPMODE = depmode=gcc3
+CFLAGS = -g -O2 -I/usr/include/postgresql -Wall -Wunused -Wmissing-prototypes -Wmissing-declarations -Werror -Wdeclaration-after-statement -Wno-pointer-sign
+CPP = gcc -E
+CPPFLAGS =
+CXX = g++
+CXXCPP = g++ -E
+CXXDEPMODE = depmode=gcc3
+CXXFLAGS = -g -O2
+CYGPATH_W = echo
+DATADIRNAME = share
+DEFS = -DHAVE_CONFIG_H
+DEPDIR = .deps
+DL_LIB = -ldl
+DOC_FALSE = #
+DOC_TRUE =
+DOT =
+DOXYGEN = /usr/bin/doxygen
+ECHO = echo
+ECHO_C =
+ECHO_N = -n
+ECHO_T =
+EFENCE_LIBS =
+EGREP = grep -E
+ENABLE_DOXYGEN_FALSE =
+ENABLE_DOXYGEN_TRUE = #
+EXEEXT =
+F77 =
+FFLAGS =
+GCONF_CFLAGS = -DORBIT2=1 -pthread -I/usr/include/gconf/2 -I/usr/include/orbit-2.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include
+GCONF_LIBS = -Wl,--export-dynamic -pthread -lgconf-2 -lORBit-2 -lm -lgmodule-2.0 -ldl -lgthread-2.0 -lglib-2.0
+GCONF_SCHEMAS_INSTALL_FALSE = #
+GCONF_SCHEMAS_INSTALL_TRUE =
+GCONF_SCHEMA_CONFIG_SOURCE = xml::${prefix}/etc/gconf/gconf.xml.defaults
+GCONF_SCHEMA_CONFIG_SOURCE_DIRONLY = ${prefix}/etc/gconf/gconf.xml.defaults
+GCONF_SCHEMA_FILE_DIR = $(sysconfdir)/gconf/schemas
+GDK_PIXBUF_CFLAGS = -I/usr/include/gtk-2.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include
+GDK_PIXBUF_LIBS = -lgdk_pixbuf-2.0 -lm -lgobject-2.0 -lgmodule-2.0 -ldl -lglib-2.0
+GETTEXT_PACKAGE = gnucash
+GLADE_CFLAGS = -DXTHREADS -I/usr/include/libglade-2.0 -I/usr/include/gtk-2.0 -I/usr/include/libxml2 -I/usr/lib/gtk-2.0/include -I/usr/X11R6/include -I/usr/include/atk-1.0 -I/usr/include/pango-1.0 -I/usr/include/freetype2 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include
+GLADE_LIBS = -lglade-2.0 -lgtk-x11-2.0 -lxml2 -lz -lgdk-x11-2.0 -latk-1.0 -lgdk_pixbuf-2.0 -lm -lpangoxft-1.0 -lpangox-1.0 -lpangoft2-1.0 -lpango-1.0 -lgobject-2.0 -lgmodule-2.0 -ldl -lglib-2.0
+GLIB_CFLAGS = -pthread -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include
+GLIB_GENMARSHAL = /usr/bin/glib-genmarshal
+GLIB_LIBS = -pthread -lgthread-2.0 -lgobject-2.0 -lglib-2.0
+GLIB_MKENUMS = glib-mkenums
+GMOFILES = da.gmo de.gmo el.gmo en_GB.gmo es.gmo es_NI.gmo fr.gmo hu.gmo it.gmo ja.gmo nb.gmo nl.gmo pl.gmo pt.gmo pt_BR.gmo ru.gmo rw.gmo sk.gmo sv.gmo ta.gmo uk.gmo zh_CN.gmo zh_TW.gmo
+GMSGFMT = /usr/bin/msgfmt
+GNC_ACCOUNTS_DIR = ${GNC_SHAREDIR}/accounts
+GNC_ADD_ON_SRFIS =
+GNC_CONFIGDIR = ${sysconfdir}
+GNC_CTAGS_FILE =
+GNC_CTAGS_FILE_FALSE =
+GNC_CTAGS_FILE_TRUE = #
+GNC_DOC_INSTALL_DIR = ${datadir}/doc
+GNC_ETAGS_FILE =
+GNC_ETAGS_FILE_FALSE =
+GNC_ETAGS_FILE_TRUE = #
+GNC_FALSE_FALSE =
+GNC_FALSE_TRUE = #
+GNC_GLADE_DIR = ${GNC_SHAREDIR}/glade
+GNC_GWRAP_LIBDIR = ${GNC_SHAREDIR}/guile-modules/g-wrapped
+GNC_HAVE_GUILE_WWW_FALSE =
+GNC_HAVE_GUILE_WWW_TRUE = #
+GNC_HELPDIR = ${datadir}
+GNC_INCLUDE_DIR = ${includedir}
+GNC_LIBDIR = ${libdir}
+GNC_LIBEXECDIR = ${libexecdir}
+GNC_MODULE_DIR = ${pkglibdir}
+GNC_PIXMAP_DIR = ${GNC_SHAREDIR}/pixmaps
+GNC_SCM_INSTALL_DIR = ${datadir}/scm
+GNC_SHAREDIR = ${datadir}
+GNC_SRFI_LOAD_PATH =
+GNC_TEST_SRFI_LOAD_CMD =
+GNC_UI_DIR = ${GNC_SHAREDIR}/ui
+GNOME_CFLAGS = -DORBIT2=1 -pthread -DXTHREADS -I/usr/include/libgnomeui-2.0 -I/usr/include/libgnome-2.0 -I/usr/include/libgnomecanvas-2.0 -I/usr/include/gtk-2.0 -I/usr/include/libart-2.0 -I/usr/include/gconf/2 -I/usr/include/libbonoboui-2.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/orbit-2.0 -I/usr/include/libbonobo-2.0 -I/usr/include/gnome-vfs-2.0 -I/usr/lib/gnome-vfs-2.0/include -I/usr/include/bonobo-activation-2.0 -I/usr/include/pango-1.0 -I/usr/include/freetype2 -I/usr/lib/gtk-2.0/include -I/usr/X11R6/include -I/usr/include/atk-1.0 -I/usr/include/libxml2
+GNOME_LIBS = -Wl,--export-dynamic -pthread -L/usr/X11R6/lib -lgnomeui-2 -lSM -lICE -lbonoboui-2 -lxml2 -lz -lgnomecanvas-2 -lgnome-2 -lpopt -lart_lgpl_2 -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lgdk_pixbuf-2.0 -lpangoxft-1.0 -lpangox-1.0 -lpangoft2-1.0 -lpango-1.0 -lgobject-2.0 -lgnomevfs-2 -lbonobo-2 -lgconf-2 -lbonobo-activation -lORBit-2 -lm -lgmodule-2.0 -ldl -lgthread-2.0 -lglib-2.0
+GNOME_PRINT_CFLAGS = -DXTHREADS -I/usr/include/libgnomeprint-2.2 -I/usr/include/libart-2.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libxml2 -I/usr/include/pango-1.0 -I/usr/include/libgnomeprintui-2.2 -I/usr/include/libgnomecanvas-2.0 -I/usr/include/freetype2 -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/X11R6/include -I/usr/include/atk-1.0
+GNOME_PRINT_LIBS = -Wl,--export-dynamic -lgnomeprintui-2-2 -lgnomeprint-2-2 -lgnomecanvas-2 -lxml2 -lz -lart_lgpl_2 -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lgdk_pixbuf-2.0 -lm -lpangoxft-1.0 -lpangox-1.0 -lpangoft2-1.0 -lpango-1.0 -lgobject-2.0 -lgmodule-2.0 -ldl -lglib-2.0
+GNUCASH_APP_UTILS_CFLAGS = -DGNUCASH -pthread -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -std=gnu99
+GNUCASH_APP_UTILS_LIBS = -L${pkglibdir} -L${GNC_SHAREDIR}/guile-modules/g-wrapped -pthread -lgthread-2.0 -lgobject-2.0 -lglib-2.0 -lguile -lguile-ltdl -lqthreads -lpthread -lcrypt -lm -lgncmod-engine -lgw-engine -lgw-kvp -lgncmodule -lgncmod-calculation -lgncmod-app-utils
+GNUCASH_ENABLE_GUI_FALSE = #
+GNUCASH_ENABLE_GUI_TRUE =
+GNUCASH_ENGINE_BASE_CFLAGS = -DGNUCASH -pthread -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -std=gnu99
+GNUCASH_ENGINE_BASE_LIBS = -pthread -lgthread-2.0 -lgobject-2.0 -lglib-2.0
+GNUCASH_ENGINE_CFLAGS = -DGNUCASH -pthread -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -std=gnu99
+GNUCASH_ENGINE_LIBS = -L${pkglibdir} -L${GNC_SHAREDIR}/guile-modules/g-wrapped -pthread -lgthread-2.0 -lgobject-2.0 -lglib-2.0 -lguile -lguile-ltdl -lqthreads -lpthread -lcrypt -lm -lgncmod-engine -lgw-engine -lgw-kvp -lgncmodule
+GNUCASH_GNOME_UTILS_CFLAGS = -DGNUCASH -pthread -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -std=gnu99 -pthread -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -DXTHREADS -I/usr/include/libgnomeprint-2.2 -I/usr/include/libart-2.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libxml2 -I/usr/include/pango-1.0 -I/usr/include/libgnomeprintui-2.2 -I/usr/include/libgnomecanvas-2.0 -I/usr/include/freetype2 -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/X11R6/include -I/usr/include/atk-1.0 -I/usr/include/gtk-2.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include
+GNUCASH_GNOME_UTILS_LIBS = -L${pkglibdir} -L${GNC_SHAREDIR}/guile-modules/g-wrapped -pthread -lgthread-2.0 -lgobject-2.0 -lglib-2.0 -lguile -lguile-ltdl -lqthreads -lpthread -lcrypt -lm -lgncmod-engine -lgw-engine -lgw-kvp -lgncmodule -lgncmod-calculation -lgncmod-app-utils -Wl,--export-dynamic -pthread -L/usr/X11R6/lib -lgnomeui-2 -lSM -lICE -lbonoboui-2 -lxml2 -lz -lgnomecanvas-2 -lgnome-2 -lpopt -lart_lgpl_2 -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lgdk_pixbuf-2.0 -lpangoxft-1.0 -lpangox-1.0 -lpangoft2-1.0 -lpango-1.0 -lgobject-2.0 -lgnomevfs-2 -lbonobo-2 -lgconf-2 -lbonobo-activation -lORBit-2 -lm -lgmodule-2.0 -ldl -lgthread-2.0 -lglib-2.0 -lgncmod-network-utils -Wl,--export-dynamic -lgnomeprintui-2-2 -lgnomeprint-2-2 -lgnomecanvas-2 -lxml2 -lz -lart_lgpl_2 -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lgdk_pixbuf-2.0 -lm -lpangoxft-1.0 -lpangox-1.0 -lpangoft2-1.0 -lpango-1.0 -lgobject-2.0 -lgmodule-2.0 -ldl -lglib-2.0 -Wl,--export-dynamic -pthread -L/usr/X11R6/lib -lgtkhtml-3.1 -lgnomeui-2 -lSM -lICE -lgnomeprintui-2-2 -lglade-2.0 -lbonoboui-2 -lgnome-2 -lpopt -lgnomevfs-2 -lbonobo-2 -lgconf-2 -lbonobo-activation -lORBit-2 -lgthread-2.0 -lgnomeprint-2-2 -lgnomecanvas-2 -lart_lgpl_2 -lgtk-x11-2.0 -lxml2 -lz -lgdk-x11-2.0 -latk-1.0 -lgdk_pixbuf-2.0 -lm -lpangoxft-1.0 -lpangox-1.0 -lpangoft2-1.0 -lpango-1.0 -lgobject-2.0 -lgmodule-2.0 -ldl -lglib-2.0 -lglade-2.0 -lgtk-x11-2.0 -lxml2 -lz -lgdk-x11-2.0 -latk-1.0 -lgdk_pixbuf-2.0 -lm -lpangoxft-1.0 -lpangox-1.0 -lpangoft2-1.0 -lpango-1.0 -lgobject-2.0 -lgmodule-2.0 -ldl -lglib-2.0 -lgdk_pixbuf-2.0 -lm -lgobject-2.0 -lgmodule-2.0 -ldl -lglib-2.0 -lgncmod-gnome-utils
+GNUCASH_MAJOR_VERSION = 1
+GNUCASH_MICRO_VERSION = 0
+GNUCASH_MINOR_VERSION = 9
+GNUCASH_NETWORK_UTILS_CFLAGS = -pthread -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include
+GNUCASH_NETWORK_UTILS_LIBS = -Wl,--export-dynamic -pthread -L/usr/X11R6/lib -lgnomeui-2 -lSM -lICE -lbonoboui-2 -lxml2 -lz -lgnomecanvas-2 -lgnome-2 -lpopt -lart_lgpl_2 -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lgdk_pixbuf-2.0 -lpangoxft-1.0 -lpangox-1.0 -lpangoft2-1.0 -lpango-1.0 -lgobject-2.0 -lgnomevfs-2 -lbonobo-2 -lgconf-2 -lbonobo-activation -lORBit-2 -lm -lgmodule-2.0 -ldl -lgthread-2.0 -lglib-2.0 -lgncmod-network-utils
+GNUCASH_REGISTER_CORE_CFLAGS = -DGNUCASH -pthread -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -std=gnu99 -pthread -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -DXTHREADS -I/usr/include/libgnomeprint-2.2 -I/usr/include/libart-2.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libxml2 -I/usr/include/pango-1.0 -I/usr/include/libgnomeprintui-2.2 -I/usr/include/libgnomecanvas-2.0 -I/usr/include/freetype2 -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/X11R6/include -I/usr/include/atk-1.0 -I/usr/include/gtk-2.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include
+GNUCASH_REGISTER_CORE_LIBS = -L${pkglibdir} -L${GNC_SHAREDIR}/guile-modules/g-wrapped -pthread -lgthread-2.0 -lgobject-2.0 -lglib-2.0 -lguile -lguile-ltdl -lqthreads -lpthread -lcrypt -lm -lgncmod-engine -lgw-engine -lgw-kvp -lgncmodule -lgncmod-calculation -lgncmod-app-utils -Wl,--export-dynamic -pthread -L/usr/X11R6/lib -lgnomeui-2 -lSM -lICE -lbonoboui-2 -lxml2 -lz -lgnomecanvas-2 -lgnome-2 -lpopt -lart_lgpl_2 -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lgdk_pixbuf-2.0 -lpangoxft-1.0 -lpangox-1.0 -lpangoft2-1.0 -lpango-1.0 -lgobject-2.0 -lgnomevfs-2 -lbonobo-2 -lgconf-2 -lbonobo-activation -lORBit-2 -lm -lgmodule-2.0 -ldl -lgthread-2.0 -lglib-2.0 -lgncmod-network-utils -Wl,--export-dynamic -lgnomeprintui-2-2 -lgnomeprint-2-2 -lgnomecanvas-2 -lxml2 -lz -lart_lgpl_2 -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lgdk_pixbuf-2.0 -lm -lpangoxft-1.0 -lpangox-1.0 -lpangoft2-1.0 -lpango-1.0 -lgobject-2.0 -lgmodule-2.0 -ldl -lglib-2.0 -Wl,--export-dynamic -pthread -L/usr/X11R6/lib -lgtkhtml-3.1 -lgnomeui-2 -lSM -lICE -lgnomeprintui-2-2 -lglade-2.0 -lbonoboui-2 -lgnome-2 -lpopt -lgnomevfs-2 -lbonobo-2 -lgconf-2 -lbonobo-activation -lORBit-2 -lgthread-2.0 -lgnomeprint-2-2 -lgnomecanvas-2 -lart_lgpl_2 -lgtk-x11-2.0 -lxml2 -lz -lgdk-x11-2.0 -latk-1.0 -lgdk_pixbuf-2.0 -lm -lpangoxft-1.0 -lpangox-1.0 -lpangoft2-1.0 -lpango-1.0 -lgobject-2.0 -lgmodule-2.0 -ldl -lglib-2.0 -lglade-2.0 -lgtk-x11-2.0 -lxml2 -lz -lgdk-x11-2.0 -latk-1.0 -lgdk_pixbuf-2.0 -lm -lpangoxft-1.0 -lpangox-1.0 -lpangoft2-1.0 -lpango-1.0 -lgobject-2.0 -lgmodule-2.0 -ldl -lglib-2.0 -lgdk_pixbuf-2.0 -lm -lgobject-2.0 -lgmodule-2.0 -ldl -lglib-2.0 -lgncmod-gnome-utils -lgncmod-register-core
+GNUCASH_SEPARATE_BUILDDIR_FALSE =
+GNUCASH_SEPARATE_BUILDDIR_TRUE = #
+GOBJECT_QUERY = gobject-query
+GSF_CFLAGS = -I/usr/include/libgsf-1 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libxml2
+GSF_LIBS = -lgsf-gnome-1 -lgsf-1 -lgobject-2.0 -lxml2 -lz -lm -lglib-2.0
+GTKHTML_CFLAGS = -DXTHREADS -DORBIT2=1 -pthread -I/usr/include/libgtkhtml-3.1 -I/usr/include/gtk-2.0 -I/usr/include/libgnomeui-2.0 -I/usr/include/libgnomeprint-2.2 -I/usr/include/libgnomeprintui-2.2 -I/usr/include/libglade-2.0 -I/usr/lib/gtk-2.0/include -I/usr/X11R6/include -I/usr/include/atk-1.0 -I/usr/include/pango-1.0 -I/usr/include/freetype2 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libgnome-2.0 -I/usr/include/libgnomecanvas-2.0 -I/usr/include/libart-2.0 -I/usr/include/gconf/2 -I/usr/include/libbonoboui-2.0 -I/usr/include/orbit-2.0 -I/usr/include/libbonobo-2.0 -I/usr/include/gnome-vfs-2.0 -I/usr/lib/gnome-vfs-2.0/include -I/usr/include/bonobo-activation-2.0 -I/usr/include/libxml2
+GTKHTML_LIBS = -Wl,--export-dynamic -pthread -L/usr/X11R6/lib -lgtkhtml-3.1 -lgnomeui-2 -lSM -lICE -lgnomeprintui-2-2 -lglade-2.0 -lbonoboui-2 -lgnome-2 -lpopt -lgnomevfs-2 -lbonobo-2 -lgconf-2 -lbonobo-activation -lORBit-2 -lgthread-2.0 -lgnomeprint-2-2 -lgnomecanvas-2 -lart_lgpl_2 -lgtk-x11-2.0 -lxml2 -lz -lgdk-x11-2.0 -latk-1.0 -lgdk_pixbuf-2.0 -lm -lpangoxft-1.0 -lpangox-1.0 -lpangoft2-1.0 -lpango-1.0 -lgobject-2.0 -lgmodule-2.0 -ldl -lglib-2.0
+GTK_CFLAGS = -DXTHREADS -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/X11R6/include -I/usr/include/atk-1.0 -I/usr/include/pango-1.0 -I/usr/include/freetype2 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include
+GTK_LIBS = -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lgdk_pixbuf-2.0 -lm -lpangoxft-1.0 -lpangox-1.0 -lpangoft2-1.0 -lpango-1.0 -lgobject-2.0 -lgmodule-2.0 -ldl -lglib-2.0
+GTK_XIM_FLAGS = -DUSE_XIM
+GUILE = /usr/bin/guile
+GUILE_FALSE = #
+GUILE_INCS =
+GUILE_LIBS = -lguile -lguile-ltdl -lqthreads -lpthread -lcrypt -lm
+GUILE_TRUE =
+G_WRAP_COMPILE_ARGS = -std=gnu99
+G_WRAP_CONFIG = /usr/bin/g-wrap-config
+G_WRAP_LIB_DIR = /usr/lib/site
+G_WRAP_LINK_ARGS = -lgwrap-guile-runtime -lgwrap-core-runtime -lguile -lguile-ltdl -lqthreads -lpthread -lcrypt -lm -lffi
+G_WRAP_MODULE_DIR = /usr/share/guile/site
+HAVE_GLIB26_FALSE = #
+HAVE_GLIB26_TRUE =
+HBCI_CFLAGS =
+HBCI_DIR =
+HBCI_LIBS =
+INSTALL_DATA = ${INSTALL} -m 644
+INSTALL_PROGRAM = ${INSTALL}
+INSTALL_SCRIPT = ${INSTALL}
+INSTALL_STRIP_PROGRAM = ${SHELL} $(install_sh) -c -s
+INSTOBJEXT = .mo
+INTLLIBS =
+INTLTOOL_CAVES_RULE = %.caves: %.caves.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@
+INTLTOOL_DESKTOP_RULE = %.desktop: %.desktop.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@
+INTLTOOL_DIRECTORY_RULE = %.directory: %.directory.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@
+INTLTOOL_EXTRACT = $(top_builddir)/intltool-extract
+INTLTOOL_ICONV = /usr/bin/iconv
+INTLTOOL_KBD_RULE = %.kbd: %.kbd.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -m -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@
+INTLTOOL_KEYS_RULE = %.keys: %.keys.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -k -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@
+INTLTOOL_MERGE = $(top_builddir)/intltool-merge
+INTLTOOL_MSGFMT = /usr/bin/msgfmt
+INTLTOOL_MSGMERGE = /usr/bin/msgmerge
+INTLTOOL_OAF_RULE = %.oaf: %.oaf.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -o -p $(top_srcdir)/po $< $@
+INTLTOOL_PERL = /usr/bin/perl
+INTLTOOL_PONG_RULE = %.pong: %.pong.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@
+INTLTOOL_PROP_RULE = %.prop: %.prop.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@
+INTLTOOL_SCHEMAS_RULE = %.schemas: %.schemas.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -s -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@
+INTLTOOL_SERVER_RULE = %.server: %.server.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -o -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@
+INTLTOOL_SHEET_RULE = %.sheet: %.sheet.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@
+INTLTOOL_SOUNDLIST_RULE = %.soundlist: %.soundlist.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@
+INTLTOOL_THEME_RULE = %.theme: %.theme.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@
+INTLTOOL_UI_RULE = %.ui: %.ui.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@
+INTLTOOL_UPDATE = $(top_builddir)/intltool-update
+INTLTOOL_XAM_RULE = %.xam: %.xml.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@
+INTLTOOL_XGETTEXT = /usr/bin/xgettext
+INTLTOOL_XML_NOMERGE_RULE = %.xml: %.xml.in $(INTLTOOL_MERGE) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u /tmp $< $@
+INTLTOOL_XML_RULE = %.xml: %.xml.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@
+LC_MESSAGES_ENUM = LC_MESSAGES
+LDFLAGS =
+LIBGOFFICE_CFLAGS = -DXTHREADS -I/usr/include/libgoffice-1 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libgsf-1 -I/usr/include/libxml2 -I/usr/include/gtk-2.0 -I/usr/include/libglade-2.0 -I/usr/include/libgnomeprint-2.2 -I/usr/include/libart-2.0 -I/usr/lib/gtk-2.0/include -I/usr/X11R6/include -I/usr/include/atk-1.0 -I/usr/include/pango-1.0 -I/usr/include/freetype2
+LIBGOFFICE_LIBS = -Wl,--export-dynamic -lgoffice-1 -lgsf-1 -lglade-2.0 -lgnomeprint-2-2 -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lgdk_pixbuf-2.0 -lpangoxft-1.0 -lpangox-1.0 -lpangoft2-1.0 -lart_lgpl_2 -lxml2 -lz -lm -lpango-1.0 -lgobject-2.0 -lgmodule-2.0 -ldl -lglib-2.0
+LIBGUPPI_CFLAGS =
+LIBGUPPI_LIBS =
+LIBOBJS =
+LIBOBJS_SEDSCRIPT = s,\.[^.]* ,&,g;s,\.[^.]*$$,&,
+LIBOFX_CFLAGS =
+LIBOFX_LIBS =
+LIBQOF_BACKEND_QSF_LIBRARY_VERSION =
+LIBQOF_LIBRARY_VERSION =
+LIBS = -lpopt -lm -lm
+LIBTOOL = $(SHELL) $(top_builddir)/libtool
+LIBTOOL_DEPS = ./ltmain.sh
+LIBXML2_CFLAGS = -I/usr/include/libxml2
+LIBXML2_LIBS = -lxml2 -lz -lm
+LIBXML_VERSION = 0.20
+LN_S = ln -s
+LOCALE_DIR = ${prefix}/share/locale
+LTLIBOBJS =
+MAINT =
+MAINTAINER_MODE_FALSE = #
+MAINTAINER_MODE_TRUE =
+MAKEINFO = ${SHELL} /opt/working/temp/cashutil/missing --run makeinfo
+MKINSTALLDIRS = ./mkinstalldirs
+MSGFMT = /usr/bin/msgfmt
+MT940_DIR =
+OBJEXT = o
+OFX_DIR =
+PACKAGE = gnucash
+PACKAGE_BUGREPORT = http://bugzilla.gnome.org/enter_bug.cgi?product=GnuCash
+PACKAGE_NAME = gnucash
+PACKAGE_STRING = gnucash 1.99.0
+PACKAGE_TARNAME = gnucash
+PACKAGE_VERSION = 1.99.0
+PATH_SEPARATOR = :
+PERL = /usr/bin/perl
+PERLINCL = /usr/lib/perl/5.8
+PGSQL_CFLAGS = -I/usr/include/postgresql
+PGSQL_LIBS = -L/usr/lib
+PKG_CONFIG = /usr/bin/pkg-config
+POFILES = da.po de.po el.po en_GB.po es.po es_NI.po fr.po hu.po it.po ja.po nb.po nl.po pl.po pt.po pt_BR.po ru.po rw.po sk.po sv.po ta.po uk.po zh_CN.po zh_TW.po
+POSUB = po
+PO_IN_DATADIR_FALSE =
+PO_IN_DATADIR_TRUE =
+PRINT_CFLAGS = -I/usr/include/libgnomeprint-2.2 -I/usr/include/libart-2.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libxml2 -I/usr/include/pango-1.0
+PRINT_LIBS = -Wl,--export-dynamic -lgnomeprint-2-2 -lart_lgpl_2 -lxml2 -lz -lm -lpango-1.0 -lgobject-2.0 -lgmodule-2.0 -ldl -lglib-2.0
+QOF_CFLAGS = -I/usr/include/qof -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libxml2
+QOF_LIBS = -lqof -lgda-2 -lglib-2.0 -lxml2 -lz -lm
+QOF_LIB_DIR = /usr/lib
+QOF_PREFIX = /usr
+QSF_SCHEMA_DIR = ${GNC_SHAREDIR}/xml/qsf
+QTTHREADS_LIB = -lqthreads
+RANLIB = ranlib
+READLINE_LIB = -lreadline
+RPC_DIR =
+SET_MAKE =
+SHELL = /bin/sh
+SQL_DIR = postgres
+STRIP = strip
+TERMCAP_LIB = -ltermcap
+USE_LIBGOFFICE =
+USE_LIBGOFFICE_FALSE = #
+USE_LIBGOFFICE_TRUE =
+USE_LIBQOF =
+USE_LIBQOF_FALSE =
+USE_LIBQOF_TRUE = #
+USE_NLS = yes
+VERSION = 1.99.0
+WITH_GNOME_FALSE = #
+WITH_GNOME_TRUE =
+WITH_GTK_FALSE = #
+WITH_GTK_TRUE =
+XGETTEXT = /usr/bin/xgettext
+XML_CFLAGS = -I/usr/include/libxml2
+XML_LIBS = -lxml2 -lz -lm
+ac_ct_AR = ar
+ac_ct_CC = gcc
+ac_ct_CXX = g++
+ac_ct_F77 =
+ac_ct_RANLIB = ranlib
+ac_ct_STRIP = strip
+ac_pt_PKG_CONFIG =
+am__fastdepCC_FALSE = #
+am__fastdepCC_TRUE =
+am__fastdepCXX_FALSE = #
+am__fastdepCXX_TRUE =
+am__include = include
+am__leading_dot = .
+am__quote =
+aqbanking_data =
+aqbanking_dir =
+aqbanking_includes =
+aqbanking_libs =
+aqbanking_libspp =
+aqbanking_plugins =
+bindir = ${exec_prefix}/bin
+build = i686-pc-linux-gnu
+build_alias =
+build_cpu = i686
+build_os = linux-gnu
+build_vendor = pc
+cflags_set = yes
+datadir = ${prefix}/share
+enable_dot = no
+enable_html_docs = yes
+enable_latex_docs = no
+exec_prefix = ${prefix}
+gnumeric_icondir = ${GNC_SHAREDIR}/pixmaps
+gnumeric_plugindir = ${gog_plugindir}
+gog_plugindir = ${GNC_LIBDIR}/plugins
+host = i686-pc-linux-gnu
+host_alias =
+host_cpu = i686
+host_os = linux-gnu
+host_vendor = pc
+includedir = ${prefix}/include
+infodir = ${prefix}/info
+install_sh = /opt/working/temp/cashutil/install-sh
+libdir = ${exec_prefix}/lib
+libexecdir = ${exec_prefix}/libexec
+localstatedir = ${prefix}/var
+mandir = ${prefix}/man
+oldincludedir = /usr/include
+prefix = /opt/garfield/gnccashutil
+program_transform_name = s,x,x,
+sbindir = ${exec_prefix}/sbin
+sharedstatedir = ${prefix}/com
+subdirs =
+sysconfdir = ${prefix}/etc
+target_alias =
+man_MANS = cashutil.1
+
+EXTRA_DIST = cashutil.1
+subdir = cashutil/doc/man
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+DIST_SOURCES =
+
+NROFF = nroff
+MANS = $(man_MANS)
+DIST_COMMON = $(srcdir)/Makefile.in Makefile.am
+all: all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --gnu cashutil/doc/man/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)
+
+mostlyclean-libtool:
+ -rm -f *.lo
+
+clean-libtool:
+ -rm -rf .libs _libs
+
+distclean-libtool:
+ -rm -f libtool
+uninstall-info-am:
+
+man1dir = $(mandir)/man1
+install-man1: $(man1_MANS) $(man_MANS)
+ @$(NORMAL_INSTALL)
+ $(mkinstalldirs) $(DESTDIR)$(man1dir)
+ @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
+ l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
+ for i in $$l2; do \
+ case "$$i" in \
+ *.1*) list="$$list $$i" ;; \
+ esac; \
+ done; \
+ for i in $$list; do \
+ if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
+ else file=$$i; fi; \
+ ext=`echo $$i | sed -e 's/^.*\\.//'`; \
+ case "$$ext" in \
+ 1*) ;; \
+ *) ext='1' ;; \
+ esac; \
+ inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
+ inst=`echo $$inst | sed -e 's/^.*\///'`; \
+ inst=`echo $$inst | sed '$(transform)'`.$$ext; \
+ echo " $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst"; \
+ $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst; \
+ done
+uninstall-man1:
+ @$(NORMAL_UNINSTALL)
+ @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
+ l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
+ for i in $$l2; do \
+ case "$$i" in \
+ *.1*) list="$$list $$i" ;; \
+ esac; \
+ done; \
+ for i in $$list; do \
+ ext=`echo $$i | sed -e 's/^.*\\.//'`; \
+ case "$$ext" in \
+ 1*) ;; \
+ *) ext='1' ;; \
+ esac; \
+ inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
+ inst=`echo $$inst | sed -e 's/^.*\///'`; \
+ inst=`echo $$inst | sed '$(transform)'`.$$ext; \
+ echo " rm -f $(DESTDIR)$(man1dir)/$$inst"; \
+ rm -f $(DESTDIR)$(man1dir)/$$inst; \
+ done
+tags: TAGS
+TAGS:
+
+ctags: CTAGS
+CTAGS:
+
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+
+top_distdir = ../../..
+distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+ list='$(DISTFILES)'; for file in $$list; do \
+ case $$file in \
+ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+ esac; \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+ dir="/$$dir"; \
+ $(mkinstalldirs) "$(distdir)$$dir"; \
+ else \
+ dir=''; \
+ fi; \
+ if test -d $$d/$$file; then \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ else \
+ test -f $(distdir)/$$file \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+check: check-am
+all-am: Makefile $(MANS)
+
+installdirs:
+ $(mkinstalldirs) $(DESTDIR)$(man1dir)
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-am
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-libtool
+
+dvi: dvi-am
+
+dvi-am:
+
+info: info-am
+
+info-am:
+
+install-data-am: install-man
+
+install-exec-am:
+
+install-info: install-info-am
+
+install-man: install-man1
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-info-am uninstall-man
+
+uninstall-man: uninstall-man1
+
+.PHONY: all all-am check check-am clean clean-generic clean-libtool \
+ distclean distclean-generic distclean-libtool distdir dvi \
+ dvi-am info info-am install install-am install-data \
+ install-data-am install-exec install-exec-am install-info \
+ install-info-am install-man install-man1 install-strip \
+ installcheck installcheck-am installdirs maintainer-clean \
+ maintainer-clean-generic mostlyclean mostlyclean-generic \
+ mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am \
+ uninstall-info-am uninstall-man uninstall-man1
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
Added: gnucash/branches/cashutil/cashutil/doc/man/Makefile.am
===================================================================
--- gnucash/branches/cashutil/cashutil/doc/man/Makefile.am 2005-11-03 11:03:19 UTC (rev 11802)
+++ gnucash/branches/cashutil/cashutil/doc/man/Makefile.am 2005-11-03 11:07:13 UTC (rev 11803)
@@ -0,0 +1,4 @@
+man_MANS = cashutil.1
+
+EXTRA_DIST = cashutil.1
+
Added: gnucash/branches/cashutil/cashutil/doc/man/Makefile.in
===================================================================
--- gnucash/branches/cashutil/cashutil/doc/man/Makefile.in 2005-11-03 11:03:19 UTC (rev 11802)
+++ gnucash/branches/cashutil/cashutil/doc/man/Makefile.in 2005-11-03 11:07:13 UTC (rev 11803)
@@ -0,0 +1,542 @@
+# Makefile.in generated by automake 1.7.9 from Makefile.am.
+# @configure_input@
+
+# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
+# Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+ at SET_MAKE@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ../../..
+
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+host_triplet = @host@
+ACLOCAL = @ACLOCAL@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+AR = @AR@
+ART_CFLAGS = @ART_CFLAGS@
+ART_LIBS = @ART_LIBS@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BUILD_CASHUTIL_FALSE = @BUILD_CASHUTIL_FALSE@
+BUILD_CASHUTIL_TRUE = @BUILD_CASHUTIL_TRUE@
+BUILD_GUILE = @BUILD_GUILE@
+CATALOGS = @CATALOGS@
+CATOBJEXT = @CATOBJEXT@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DATADIRNAME = @DATADIRNAME@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DL_LIB = @DL_LIB@
+DOC_FALSE = @DOC_FALSE@
+DOC_TRUE = @DOC_TRUE@
+DOT = @DOT@
+DOXYGEN = @DOXYGEN@
+ECHO = @ECHO@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EFENCE_LIBS = @EFENCE_LIBS@
+EGREP = @EGREP@
+ENABLE_DOXYGEN_FALSE = @ENABLE_DOXYGEN_FALSE@
+ENABLE_DOXYGEN_TRUE = @ENABLE_DOXYGEN_TRUE@
+EXEEXT = @EXEEXT@
+F77 = @F77@
+FFLAGS = @FFLAGS@
+GCONF_CFLAGS = @GCONF_CFLAGS@
+GCONF_LIBS = @GCONF_LIBS@
+GCONF_SCHEMAS_INSTALL_FALSE = @GCONF_SCHEMAS_INSTALL_FALSE@
+GCONF_SCHEMAS_INSTALL_TRUE = @GCONF_SCHEMAS_INSTALL_TRUE@
+GCONF_SCHEMA_CONFIG_SOURCE = @GCONF_SCHEMA_CONFIG_SOURCE@
+GCONF_SCHEMA_CONFIG_SOURCE_DIRONLY = @GCONF_SCHEMA_CONFIG_SOURCE_DIRONLY@
+GCONF_SCHEMA_FILE_DIR = @GCONF_SCHEMA_FILE_DIR@
+GDK_PIXBUF_CFLAGS = @GDK_PIXBUF_CFLAGS@
+GDK_PIXBUF_LIBS = @GDK_PIXBUF_LIBS@
+GETTEXT_PACKAGE = @GETTEXT_PACKAGE@
+GLADE_CFLAGS = @GLADE_CFLAGS@
+GLADE_LIBS = @GLADE_LIBS@
+GLIB_CFLAGS = @GLIB_CFLAGS@
+GLIB_GENMARSHAL = @GLIB_GENMARSHAL@
+GLIB_LIBS = @GLIB_LIBS@
+GLIB_MKENUMS = @GLIB_MKENUMS@
+GMOFILES = @GMOFILES@
+GMSGFMT = @GMSGFMT@
+GNC_ACCOUNTS_DIR = @GNC_ACCOUNTS_DIR@
+GNC_ADD_ON_SRFIS = @GNC_ADD_ON_SRFIS@
+GNC_CONFIGDIR = @GNC_CONFIGDIR@
+GNC_CTAGS_FILE = @GNC_CTAGS_FILE@
+GNC_CTAGS_FILE_FALSE = @GNC_CTAGS_FILE_FALSE@
+GNC_CTAGS_FILE_TRUE = @GNC_CTAGS_FILE_TRUE@
+GNC_DOC_INSTALL_DIR = @GNC_DOC_INSTALL_DIR@
+GNC_ETAGS_FILE = @GNC_ETAGS_FILE@
+GNC_ETAGS_FILE_FALSE = @GNC_ETAGS_FILE_FALSE@
+GNC_ETAGS_FILE_TRUE = @GNC_ETAGS_FILE_TRUE@
+GNC_FALSE_FALSE = @GNC_FALSE_FALSE@
+GNC_FALSE_TRUE = @GNC_FALSE_TRUE@
+GNC_GLADE_DIR = @GNC_GLADE_DIR@
+GNC_GWRAP_LIBDIR = @GNC_GWRAP_LIBDIR@
+GNC_HAVE_GUILE_WWW_FALSE = @GNC_HAVE_GUILE_WWW_FALSE@
+GNC_HAVE_GUILE_WWW_TRUE = @GNC_HAVE_GUILE_WWW_TRUE@
+GNC_HELPDIR = @GNC_HELPDIR@
+GNC_INCLUDE_DIR = @GNC_INCLUDE_DIR@
+GNC_LIBDIR = @GNC_LIBDIR@
+GNC_LIBEXECDIR = @GNC_LIBEXECDIR@
+GNC_MODULE_DIR = @GNC_MODULE_DIR@
+GNC_PIXMAP_DIR = @GNC_PIXMAP_DIR@
+GNC_SCM_INSTALL_DIR = @GNC_SCM_INSTALL_DIR@
+GNC_SHAREDIR = @GNC_SHAREDIR@
+GNC_SRFI_LOAD_PATH = @GNC_SRFI_LOAD_PATH@
+GNC_TEST_SRFI_LOAD_CMD = @GNC_TEST_SRFI_LOAD_CMD@
+GNC_UI_DIR = @GNC_UI_DIR@
+GNOME_CFLAGS = @GNOME_CFLAGS@
+GNOME_LIBS = @GNOME_LIBS@
+GNOME_PRINT_CFLAGS = @GNOME_PRINT_CFLAGS@
+GNOME_PRINT_LIBS = @GNOME_PRINT_LIBS@
+GNUCASH_APP_UTILS_CFLAGS = @GNUCASH_APP_UTILS_CFLAGS@
+GNUCASH_APP_UTILS_LIBS = @GNUCASH_APP_UTILS_LIBS@
+GNUCASH_ENABLE_GUI_FALSE = @GNUCASH_ENABLE_GUI_FALSE@
+GNUCASH_ENABLE_GUI_TRUE = @GNUCASH_ENABLE_GUI_TRUE@
+GNUCASH_ENGINE_BASE_CFLAGS = @GNUCASH_ENGINE_BASE_CFLAGS@
+GNUCASH_ENGINE_BASE_LIBS = @GNUCASH_ENGINE_BASE_LIBS@
+GNUCASH_ENGINE_CFLAGS = @GNUCASH_ENGINE_CFLAGS@
+GNUCASH_ENGINE_LIBS = @GNUCASH_ENGINE_LIBS@
+GNUCASH_GNOME_UTILS_CFLAGS = @GNUCASH_GNOME_UTILS_CFLAGS@
+GNUCASH_GNOME_UTILS_LIBS = @GNUCASH_GNOME_UTILS_LIBS@
+GNUCASH_MAJOR_VERSION = @GNUCASH_MAJOR_VERSION@
+GNUCASH_MICRO_VERSION = @GNUCASH_MICRO_VERSION@
+GNUCASH_MINOR_VERSION = @GNUCASH_MINOR_VERSION@
+GNUCASH_NETWORK_UTILS_CFLAGS = @GNUCASH_NETWORK_UTILS_CFLAGS@
+GNUCASH_NETWORK_UTILS_LIBS = @GNUCASH_NETWORK_UTILS_LIBS@
+GNUCASH_REGISTER_CORE_CFLAGS = @GNUCASH_REGISTER_CORE_CFLAGS@
+GNUCASH_REGISTER_CORE_LIBS = @GNUCASH_REGISTER_CORE_LIBS@
+GNUCASH_SEPARATE_BUILDDIR_FALSE = @GNUCASH_SEPARATE_BUILDDIR_FALSE@
+GNUCASH_SEPARATE_BUILDDIR_TRUE = @GNUCASH_SEPARATE_BUILDDIR_TRUE@
+GOBJECT_QUERY = @GOBJECT_QUERY@
+GSF_CFLAGS = @GSF_CFLAGS@
+GSF_LIBS = @GSF_LIBS@
+GTKHTML_CFLAGS = @GTKHTML_CFLAGS@
+GTKHTML_LIBS = @GTKHTML_LIBS@
+GTK_CFLAGS = @GTK_CFLAGS@
+GTK_LIBS = @GTK_LIBS@
+GTK_XIM_FLAGS = @GTK_XIM_FLAGS@
+GUILE = @GUILE@
+GUILE_FALSE = @GUILE_FALSE@
+GUILE_INCS = @GUILE_INCS@
+GUILE_LIBS = @GUILE_LIBS@
+GUILE_TRUE = @GUILE_TRUE@
+G_WRAP_COMPILE_ARGS = @G_WRAP_COMPILE_ARGS@
+G_WRAP_CONFIG = @G_WRAP_CONFIG@
+G_WRAP_LIB_DIR = @G_WRAP_LIB_DIR@
+G_WRAP_LINK_ARGS = @G_WRAP_LINK_ARGS@
+G_WRAP_MODULE_DIR = @G_WRAP_MODULE_DIR@
+HAVE_GLIB26_FALSE = @HAVE_GLIB26_FALSE@
+HAVE_GLIB26_TRUE = @HAVE_GLIB26_TRUE@
+HBCI_CFLAGS = @HBCI_CFLAGS@
+HBCI_DIR = @HBCI_DIR@
+HBCI_LIBS = @HBCI_LIBS@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INSTOBJEXT = @INSTOBJEXT@
+INTLLIBS = @INTLLIBS@
+INTLTOOL_CAVES_RULE = @INTLTOOL_CAVES_RULE@
+INTLTOOL_DESKTOP_RULE = @INTLTOOL_DESKTOP_RULE@
+INTLTOOL_DIRECTORY_RULE = @INTLTOOL_DIRECTORY_RULE@
+INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@
+INTLTOOL_ICONV = @INTLTOOL_ICONV@
+INTLTOOL_KBD_RULE = @INTLTOOL_KBD_RULE@
+INTLTOOL_KEYS_RULE = @INTLTOOL_KEYS_RULE@
+INTLTOOL_MERGE = @INTLTOOL_MERGE@
+INTLTOOL_MSGFMT = @INTLTOOL_MSGFMT@
+INTLTOOL_MSGMERGE = @INTLTOOL_MSGMERGE@
+INTLTOOL_OAF_RULE = @INTLTOOL_OAF_RULE@
+INTLTOOL_PERL = @INTLTOOL_PERL@
+INTLTOOL_PONG_RULE = @INTLTOOL_PONG_RULE@
+INTLTOOL_PROP_RULE = @INTLTOOL_PROP_RULE@
+INTLTOOL_SCHEMAS_RULE = @INTLTOOL_SCHEMAS_RULE@
+INTLTOOL_SERVER_RULE = @INTLTOOL_SERVER_RULE@
+INTLTOOL_SHEET_RULE = @INTLTOOL_SHEET_RULE@
+INTLTOOL_SOUNDLIST_RULE = @INTLTOOL_SOUNDLIST_RULE@
+INTLTOOL_THEME_RULE = @INTLTOOL_THEME_RULE@
+INTLTOOL_UI_RULE = @INTLTOOL_UI_RULE@
+INTLTOOL_UPDATE = @INTLTOOL_UPDATE@
+INTLTOOL_XAM_RULE = @INTLTOOL_XAM_RULE@
+INTLTOOL_XGETTEXT = @INTLTOOL_XGETTEXT@
+INTLTOOL_XML_NOMERGE_RULE = @INTLTOOL_XML_NOMERGE_RULE@
+INTLTOOL_XML_RULE = @INTLTOOL_XML_RULE@
+LC_MESSAGES_ENUM = @LC_MESSAGES_ENUM@
+LDFLAGS = @LDFLAGS@
+LIBGOFFICE_CFLAGS = @LIBGOFFICE_CFLAGS@
+LIBGOFFICE_LIBS = @LIBGOFFICE_LIBS@
+LIBGUPPI_CFLAGS = @LIBGUPPI_CFLAGS@
+LIBGUPPI_LIBS = @LIBGUPPI_LIBS@
+LIBOBJS = @LIBOBJS@
+LIBOBJS_SEDSCRIPT = @LIBOBJS_SEDSCRIPT@
+LIBOFX_CFLAGS = @LIBOFX_CFLAGS@
+LIBOFX_LIBS = @LIBOFX_LIBS@
+LIBQOF_BACKEND_QSF_LIBRARY_VERSION = @LIBQOF_BACKEND_QSF_LIBRARY_VERSION@
+LIBQOF_LIBRARY_VERSION = @LIBQOF_LIBRARY_VERSION@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIBTOOL_DEPS = @LIBTOOL_DEPS@
+LIBXML2_CFLAGS = @LIBXML2_CFLAGS@
+LIBXML2_LIBS = @LIBXML2_LIBS@
+LIBXML_VERSION = @LIBXML_VERSION@
+LN_S = @LN_S@
+LOCALE_DIR = @LOCALE_DIR@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
+MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
+MAKEINFO = @MAKEINFO@
+MKINSTALLDIRS = @MKINSTALLDIRS@
+MSGFMT = @MSGFMT@
+MT940_DIR = @MT940_DIR@
+OBJEXT = @OBJEXT@
+OFX_DIR = @OFX_DIR@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PERL = @PERL@
+PERLINCL = @PERLINCL@
+PGSQL_CFLAGS = @PGSQL_CFLAGS@
+PGSQL_LIBS = @PGSQL_LIBS@
+PKG_CONFIG = @PKG_CONFIG@
+POFILES = @POFILES@
+POSUB = @POSUB@
+PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@
+PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@
+PRINT_CFLAGS = @PRINT_CFLAGS@
+PRINT_LIBS = @PRINT_LIBS@
+QOF_CFLAGS = @QOF_CFLAGS@
+QOF_LIBS = @QOF_LIBS@
+QOF_LIB_DIR = @QOF_LIB_DIR@
+QOF_PREFIX = @QOF_PREFIX@
+QSF_SCHEMA_DIR = @QSF_SCHEMA_DIR@
+QTTHREADS_LIB = @QTTHREADS_LIB@
+RANLIB = @RANLIB@
+READLINE_LIB = @READLINE_LIB@
+RPC_DIR = @RPC_DIR@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SQL_DIR = @SQL_DIR@
+STRIP = @STRIP@
+TERMCAP_LIB = @TERMCAP_LIB@
+USE_LIBGOFFICE = @USE_LIBGOFFICE@
+USE_LIBGOFFICE_FALSE = @USE_LIBGOFFICE_FALSE@
+USE_LIBGOFFICE_TRUE = @USE_LIBGOFFICE_TRUE@
+USE_LIBQOF = @USE_LIBQOF@
+USE_LIBQOF_FALSE = @USE_LIBQOF_FALSE@
+USE_LIBQOF_TRUE = @USE_LIBQOF_TRUE@
+USE_NLS = @USE_NLS@
+VERSION = @VERSION@
+WITH_GNOME_FALSE = @WITH_GNOME_FALSE@
+WITH_GNOME_TRUE = @WITH_GNOME_TRUE@
+WITH_GTK_FALSE = @WITH_GTK_FALSE@
+WITH_GTK_TRUE = @WITH_GTK_TRUE@
+XGETTEXT = @XGETTEXT@
+XML_CFLAGS = @XML_CFLAGS@
+XML_LIBS = @XML_LIBS@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_F77 = @ac_ct_F77@
+ac_ct_RANLIB = @ac_ct_RANLIB@
+ac_ct_STRIP = @ac_ct_STRIP@
+ac_pt_PKG_CONFIG = @ac_pt_PKG_CONFIG@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
+am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+aqbanking_data = @aqbanking_data@
+aqbanking_dir = @aqbanking_dir@
+aqbanking_includes = @aqbanking_includes@
+aqbanking_libs = @aqbanking_libs@
+aqbanking_libspp = @aqbanking_libspp@
+aqbanking_plugins = @aqbanking_plugins@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+cflags_set = @cflags_set@
+datadir = @datadir@
+enable_dot = @enable_dot@
+enable_html_docs = @enable_html_docs@
+enable_latex_docs = @enable_latex_docs@
+exec_prefix = @exec_prefix@
+gnumeric_icondir = @gnumeric_icondir@
+gnumeric_plugindir = @gnumeric_plugindir@
+gog_plugindir = @gog_plugindir@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+subdirs = @subdirs@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+man_MANS = cashutil.1
+
+EXTRA_DIST = cashutil.1
+subdir = cashutil/doc/man
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+DIST_SOURCES =
+
+NROFF = nroff
+MANS = $(man_MANS)
+DIST_COMMON = $(srcdir)/Makefile.in Makefile.am
+all: all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --gnu cashutil/doc/man/Makefile
+Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)
+
+mostlyclean-libtool:
+ -rm -f *.lo
+
+clean-libtool:
+ -rm -rf .libs _libs
+
+distclean-libtool:
+ -rm -f libtool
+uninstall-info-am:
+
+man1dir = $(mandir)/man1
+install-man1: $(man1_MANS) $(man_MANS)
+ @$(NORMAL_INSTALL)
+ $(mkinstalldirs) $(DESTDIR)$(man1dir)
+ @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
+ l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
+ for i in $$l2; do \
+ case "$$i" in \
+ *.1*) list="$$list $$i" ;; \
+ esac; \
+ done; \
+ for i in $$list; do \
+ if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
+ else file=$$i; fi; \
+ ext=`echo $$i | sed -e 's/^.*\\.//'`; \
+ case "$$ext" in \
+ 1*) ;; \
+ *) ext='1' ;; \
+ esac; \
+ inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
+ inst=`echo $$inst | sed -e 's/^.*\///'`; \
+ inst=`echo $$inst | sed '$(transform)'`.$$ext; \
+ echo " $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst"; \
+ $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst; \
+ done
+uninstall-man1:
+ @$(NORMAL_UNINSTALL)
+ @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
+ l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
+ for i in $$l2; do \
+ case "$$i" in \
+ *.1*) list="$$list $$i" ;; \
+ esac; \
+ done; \
+ for i in $$list; do \
+ ext=`echo $$i | sed -e 's/^.*\\.//'`; \
+ case "$$ext" in \
+ 1*) ;; \
+ *) ext='1' ;; \
+ esac; \
+ inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
+ inst=`echo $$inst | sed -e 's/^.*\///'`; \
+ inst=`echo $$inst | sed '$(transform)'`.$$ext; \
+ echo " rm -f $(DESTDIR)$(man1dir)/$$inst"; \
+ rm -f $(DESTDIR)$(man1dir)/$$inst; \
+ done
+tags: TAGS
+TAGS:
+
+ctags: CTAGS
+CTAGS:
+
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+
+top_distdir = ../../..
+distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+ list='$(DISTFILES)'; for file in $$list; do \
+ case $$file in \
+ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+ esac; \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+ dir="/$$dir"; \
+ $(mkinstalldirs) "$(distdir)$$dir"; \
+ else \
+ dir=''; \
+ fi; \
+ if test -d $$d/$$file; then \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ else \
+ test -f $(distdir)/$$file \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+check: check-am
+all-am: Makefile $(MANS)
+
+installdirs:
+ $(mkinstalldirs) $(DESTDIR)$(man1dir)
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-am
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-libtool
+
+dvi: dvi-am
+
+dvi-am:
+
+info: info-am
+
+info-am:
+
+install-data-am: install-man
+
+install-exec-am:
+
+install-info: install-info-am
+
+install-man: install-man1
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-info-am uninstall-man
+
+uninstall-man: uninstall-man1
+
+.PHONY: all all-am check check-am clean clean-generic clean-libtool \
+ distclean distclean-generic distclean-libtool distdir dvi \
+ dvi-am info info-am install install-am install-data \
+ install-data-am install-exec install-exec-am install-info \
+ install-info-am install-man install-man1 install-strip \
+ installcheck installcheck-am installdirs maintainer-clean \
+ maintainer-clean-generic mostlyclean mostlyclean-generic \
+ mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am \
+ uninstall-info-am uninstall-man uninstall-man1
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
Added: gnucash/branches/cashutil/cashutil/doc/xml/Makefile
===================================================================
--- gnucash/branches/cashutil/cashutil/doc/xml/Makefile 2005-11-03 11:03:19 UTC (rev 11802)
+++ gnucash/branches/cashutil/cashutil/doc/xml/Makefile 2005-11-03 11:07:13 UTC (rev 11803)
@@ -0,0 +1,651 @@
+# Makefile.in generated by automake 1.7.9 from Makefile.am.
+# cashutil/doc/xml/Makefile. Generated from Makefile.in by configure.
+
+# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
+# Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+
+srcdir = .
+top_srcdir = ../../..
+
+pkgdatadir = $(datadir)/gnucash
+pkglibdir = $(libdir)/gnucash
+pkgincludedir = $(includedir)/gnucash
+top_builddir = ../../..
+
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = /usr/bin/install -c
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+host_triplet = i686-pc-linux-gnu
+ACLOCAL = ${SHELL} /opt/working/temp/cashutil/missing --run aclocal-1.7
+AMDEP_FALSE = #
+AMDEP_TRUE =
+AMTAR = ${SHELL} /opt/working/temp/cashutil/missing --run tar
+AR = ar
+ART_CFLAGS = -I/usr/include/libart-2.0
+ART_LIBS = -lart_lgpl_2
+AUTOCONF = ${SHELL} /opt/working/temp/cashutil/missing --run autoconf
+AUTOHEADER = ${SHELL} /opt/working/temp/cashutil/missing --run autoheader
+AUTOMAKE = ${SHELL} /opt/working/temp/cashutil/missing --run automake-1.7
+AWK = gawk
+BUILD_CASHUTIL_FALSE =
+BUILD_CASHUTIL_TRUE = #
+BUILD_GUILE = yes
+CATALOGS = da.gmo de.gmo el.gmo en_GB.gmo es.gmo es_NI.gmo fr.gmo hu.gmo it.gmo ja.gmo nb.gmo nl.gmo pl.gmo pt.gmo pt_BR.gmo ru.gmo rw.gmo sk.gmo sv.gmo ta.gmo uk.gmo zh_CN.gmo zh_TW.gmo
+CATOBJEXT = .gmo
+CC = gcc
+CCDEPMODE = depmode=gcc3
+CFLAGS = -g -O2 -I/usr/include/postgresql -Wall -Wunused -Wmissing-prototypes -Wmissing-declarations -Werror -Wdeclaration-after-statement -Wno-pointer-sign
+CPP = gcc -E
+CPPFLAGS =
+CXX = g++
+CXXCPP = g++ -E
+CXXDEPMODE = depmode=gcc3
+CXXFLAGS = -g -O2
+CYGPATH_W = echo
+DATADIRNAME = share
+DEFS = -DHAVE_CONFIG_H
+DEPDIR = .deps
+DL_LIB = -ldl
+DOC_FALSE = #
+DOC_TRUE =
+DOT =
+DOXYGEN = /usr/bin/doxygen
+ECHO = echo
+ECHO_C =
+ECHO_N = -n
+ECHO_T =
+EFENCE_LIBS =
+EGREP = grep -E
+ENABLE_DOXYGEN_FALSE =
+ENABLE_DOXYGEN_TRUE = #
+EXEEXT =
+F77 =
+FFLAGS =
+GCONF_CFLAGS = -DORBIT2=1 -pthread -I/usr/include/gconf/2 -I/usr/include/orbit-2.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include
+GCONF_LIBS = -Wl,--export-dynamic -pthread -lgconf-2 -lORBit-2 -lm -lgmodule-2.0 -ldl -lgthread-2.0 -lglib-2.0
+GCONF_SCHEMAS_INSTALL_FALSE = #
+GCONF_SCHEMAS_INSTALL_TRUE =
+GCONF_SCHEMA_CONFIG_SOURCE = xml::${prefix}/etc/gconf/gconf.xml.defaults
+GCONF_SCHEMA_CONFIG_SOURCE_DIRONLY = ${prefix}/etc/gconf/gconf.xml.defaults
+GCONF_SCHEMA_FILE_DIR = $(sysconfdir)/gconf/schemas
+GDK_PIXBUF_CFLAGS = -I/usr/include/gtk-2.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include
+GDK_PIXBUF_LIBS = -lgdk_pixbuf-2.0 -lm -lgobject-2.0 -lgmodule-2.0 -ldl -lglib-2.0
+GETTEXT_PACKAGE = gnucash
+GLADE_CFLAGS = -DXTHREADS -I/usr/include/libglade-2.0 -I/usr/include/gtk-2.0 -I/usr/include/libxml2 -I/usr/lib/gtk-2.0/include -I/usr/X11R6/include -I/usr/include/atk-1.0 -I/usr/include/pango-1.0 -I/usr/include/freetype2 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include
+GLADE_LIBS = -lglade-2.0 -lgtk-x11-2.0 -lxml2 -lz -lgdk-x11-2.0 -latk-1.0 -lgdk_pixbuf-2.0 -lm -lpangoxft-1.0 -lpangox-1.0 -lpangoft2-1.0 -lpango-1.0 -lgobject-2.0 -lgmodule-2.0 -ldl -lglib-2.0
+GLIB_CFLAGS = -pthread -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include
+GLIB_GENMARSHAL = /usr/bin/glib-genmarshal
+GLIB_LIBS = -pthread -lgthread-2.0 -lgobject-2.0 -lglib-2.0
+GLIB_MKENUMS = glib-mkenums
+GMOFILES = da.gmo de.gmo el.gmo en_GB.gmo es.gmo es_NI.gmo fr.gmo hu.gmo it.gmo ja.gmo nb.gmo nl.gmo pl.gmo pt.gmo pt_BR.gmo ru.gmo rw.gmo sk.gmo sv.gmo ta.gmo uk.gmo zh_CN.gmo zh_TW.gmo
+GMSGFMT = /usr/bin/msgfmt
+GNC_ACCOUNTS_DIR = ${GNC_SHAREDIR}/accounts
+GNC_ADD_ON_SRFIS =
+GNC_CONFIGDIR = ${sysconfdir}
+GNC_CTAGS_FILE =
+GNC_CTAGS_FILE_FALSE =
+GNC_CTAGS_FILE_TRUE = #
+GNC_DOC_INSTALL_DIR = ${datadir}/doc
+GNC_ETAGS_FILE =
+GNC_ETAGS_FILE_FALSE =
+GNC_ETAGS_FILE_TRUE = #
+GNC_FALSE_FALSE =
+GNC_FALSE_TRUE = #
+GNC_GLADE_DIR = ${GNC_SHAREDIR}/glade
+GNC_GWRAP_LIBDIR = ${GNC_SHAREDIR}/guile-modules/g-wrapped
+GNC_HAVE_GUILE_WWW_FALSE =
+GNC_HAVE_GUILE_WWW_TRUE = #
+GNC_HELPDIR = ${datadir}
+GNC_INCLUDE_DIR = ${includedir}
+GNC_LIBDIR = ${libdir}
+GNC_LIBEXECDIR = ${libexecdir}
+GNC_MODULE_DIR = ${pkglibdir}
+GNC_PIXMAP_DIR = ${GNC_SHAREDIR}/pixmaps
+GNC_SCM_INSTALL_DIR = ${datadir}/scm
+GNC_SHAREDIR = ${datadir}
+GNC_SRFI_LOAD_PATH =
+GNC_TEST_SRFI_LOAD_CMD =
+GNC_UI_DIR = ${GNC_SHAREDIR}/ui
+GNOME_CFLAGS = -DORBIT2=1 -pthread -DXTHREADS -I/usr/include/libgnomeui-2.0 -I/usr/include/libgnome-2.0 -I/usr/include/libgnomecanvas-2.0 -I/usr/include/gtk-2.0 -I/usr/include/libart-2.0 -I/usr/include/gconf/2 -I/usr/include/libbonoboui-2.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/orbit-2.0 -I/usr/include/libbonobo-2.0 -I/usr/include/gnome-vfs-2.0 -I/usr/lib/gnome-vfs-2.0/include -I/usr/include/bonobo-activation-2.0 -I/usr/include/pango-1.0 -I/usr/include/freetype2 -I/usr/lib/gtk-2.0/include -I/usr/X11R6/include -I/usr/include/atk-1.0 -I/usr/include/libxml2
+GNOME_LIBS = -Wl,--export-dynamic -pthread -L/usr/X11R6/lib -lgnomeui-2 -lSM -lICE -lbonoboui-2 -lxml2 -lz -lgnomecanvas-2 -lgnome-2 -lpopt -lart_lgpl_2 -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lgdk_pixbuf-2.0 -lpangoxft-1.0 -lpangox-1.0 -lpangoft2-1.0 -lpango-1.0 -lgobject-2.0 -lgnomevfs-2 -lbonobo-2 -lgconf-2 -lbonobo-activation -lORBit-2 -lm -lgmodule-2.0 -ldl -lgthread-2.0 -lglib-2.0
+GNOME_PRINT_CFLAGS = -DXTHREADS -I/usr/include/libgnomeprint-2.2 -I/usr/include/libart-2.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libxml2 -I/usr/include/pango-1.0 -I/usr/include/libgnomeprintui-2.2 -I/usr/include/libgnomecanvas-2.0 -I/usr/include/freetype2 -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/X11R6/include -I/usr/include/atk-1.0
+GNOME_PRINT_LIBS = -Wl,--export-dynamic -lgnomeprintui-2-2 -lgnomeprint-2-2 -lgnomecanvas-2 -lxml2 -lz -lart_lgpl_2 -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lgdk_pixbuf-2.0 -lm -lpangoxft-1.0 -lpangox-1.0 -lpangoft2-1.0 -lpango-1.0 -lgobject-2.0 -lgmodule-2.0 -ldl -lglib-2.0
+GNUCASH_APP_UTILS_CFLAGS = -DGNUCASH -pthread -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -std=gnu99
+GNUCASH_APP_UTILS_LIBS = -L${pkglibdir} -L${GNC_SHAREDIR}/guile-modules/g-wrapped -pthread -lgthread-2.0 -lgobject-2.0 -lglib-2.0 -lguile -lguile-ltdl -lqthreads -lpthread -lcrypt -lm -lgncmod-engine -lgw-engine -lgw-kvp -lgncmodule -lgncmod-calculation -lgncmod-app-utils
+GNUCASH_ENABLE_GUI_FALSE = #
+GNUCASH_ENABLE_GUI_TRUE =
+GNUCASH_ENGINE_BASE_CFLAGS = -DGNUCASH -pthread -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -std=gnu99
+GNUCASH_ENGINE_BASE_LIBS = -pthread -lgthread-2.0 -lgobject-2.0 -lglib-2.0
+GNUCASH_ENGINE_CFLAGS = -DGNUCASH -pthread -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -std=gnu99
+GNUCASH_ENGINE_LIBS = -L${pkglibdir} -L${GNC_SHAREDIR}/guile-modules/g-wrapped -pthread -lgthread-2.0 -lgobject-2.0 -lglib-2.0 -lguile -lguile-ltdl -lqthreads -lpthread -lcrypt -lm -lgncmod-engine -lgw-engine -lgw-kvp -lgncmodule
+GNUCASH_GNOME_UTILS_CFLAGS = -DGNUCASH -pthread -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -std=gnu99 -pthread -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -DXTHREADS -I/usr/include/libgnomeprint-2.2 -I/usr/include/libart-2.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libxml2 -I/usr/include/pango-1.0 -I/usr/include/libgnomeprintui-2.2 -I/usr/include/libgnomecanvas-2.0 -I/usr/include/freetype2 -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/X11R6/include -I/usr/include/atk-1.0 -I/usr/include/gtk-2.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include
+GNUCASH_GNOME_UTILS_LIBS = -L${pkglibdir} -L${GNC_SHAREDIR}/guile-modules/g-wrapped -pthread -lgthread-2.0 -lgobject-2.0 -lglib-2.0 -lguile -lguile-ltdl -lqthreads -lpthread -lcrypt -lm -lgncmod-engine -lgw-engine -lgw-kvp -lgncmodule -lgncmod-calculation -lgncmod-app-utils -Wl,--export-dynamic -pthread -L/usr/X11R6/lib -lgnomeui-2 -lSM -lICE -lbonoboui-2 -lxml2 -lz -lgnomecanvas-2 -lgnome-2 -lpopt -lart_lgpl_2 -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lgdk_pixbuf-2.0 -lpangoxft-1.0 -lpangox-1.0 -lpangoft2-1.0 -lpango-1.0 -lgobject-2.0 -lgnomevfs-2 -lbonobo-2 -lgconf-2 -lbonobo-activation -lORBit-2 -lm -lgmodule-2.0 -ldl -lgthread-2.0 -lglib-2.0 -lgncmod-network-utils -Wl,--export-dynamic -lgnomeprintui-2-2 -lgnomeprint-2-2 -lgnomecanvas-2 -lxml2 -lz -lart_lgpl_2 -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lgdk_pixbuf-2.0 -lm -lpangoxft-1.0 -lpangox-1.0 -lpangoft2-1.0 -lpango-1.0 -lgobject-2.0 -lgmodule-2.0 -ldl -lglib-2.0 -Wl,--export-dynamic -pthread -L/usr/X11R6/lib -lgtkhtml-3.1 -lgnomeui-2 -lSM -lICE -lgnomeprintui-2-2 -lglade-2.0 -lbonoboui-2 -lgnome-2 -lpopt -lgnomevfs-2 -lbonobo-2 -lgconf-2 -lbonobo-activation -lORBit-2 -lgthread-2.0 -lgnomeprint-2-2 -lgnomecanvas-2 -lart_lgpl_2 -lgtk-x11-2.0 -lxml2 -lz -lgdk-x11-2.0 -latk-1.0 -lgdk_pixbuf-2.0 -lm -lpangoxft-1.0 -lpangox-1.0 -lpangoft2-1.0 -lpango-1.0 -lgobject-2.0 -lgmodule-2.0 -ldl -lglib-2.0 -lglade-2.0 -lgtk-x11-2.0 -lxml2 -lz -lgdk-x11-2.0 -latk-1.0 -lgdk_pixbuf-2.0 -lm -lpangoxft-1.0 -lpangox-1.0 -lpangoft2-1.0 -lpango-1.0 -lgobject-2.0 -lgmodule-2.0 -ldl -lglib-2.0 -lgdk_pixbuf-2.0 -lm -lgobject-2.0 -lgmodule-2.0 -ldl -lglib-2.0 -lgncmod-gnome-utils
+GNUCASH_MAJOR_VERSION = 1
+GNUCASH_MICRO_VERSION = 0
+GNUCASH_MINOR_VERSION = 9
+GNUCASH_NETWORK_UTILS_CFLAGS = -pthread -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include
+GNUCASH_NETWORK_UTILS_LIBS = -Wl,--export-dynamic -pthread -L/usr/X11R6/lib -lgnomeui-2 -lSM -lICE -lbonoboui-2 -lxml2 -lz -lgnomecanvas-2 -lgnome-2 -lpopt -lart_lgpl_2 -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lgdk_pixbuf-2.0 -lpangoxft-1.0 -lpangox-1.0 -lpangoft2-1.0 -lpango-1.0 -lgobject-2.0 -lgnomevfs-2 -lbonobo-2 -lgconf-2 -lbonobo-activation -lORBit-2 -lm -lgmodule-2.0 -ldl -lgthread-2.0 -lglib-2.0 -lgncmod-network-utils
+GNUCASH_REGISTER_CORE_CFLAGS = -DGNUCASH -pthread -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -std=gnu99 -pthread -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -DXTHREADS -I/usr/include/libgnomeprint-2.2 -I/usr/include/libart-2.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libxml2 -I/usr/include/pango-1.0 -I/usr/include/libgnomeprintui-2.2 -I/usr/include/libgnomecanvas-2.0 -I/usr/include/freetype2 -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/X11R6/include -I/usr/include/atk-1.0 -I/usr/include/gtk-2.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include
+GNUCASH_REGISTER_CORE_LIBS = -L${pkglibdir} -L${GNC_SHAREDIR}/guile-modules/g-wrapped -pthread -lgthread-2.0 -lgobject-2.0 -lglib-2.0 -lguile -lguile-ltdl -lqthreads -lpthread -lcrypt -lm -lgncmod-engine -lgw-engine -lgw-kvp -lgncmodule -lgncmod-calculation -lgncmod-app-utils -Wl,--export-dynamic -pthread -L/usr/X11R6/lib -lgnomeui-2 -lSM -lICE -lbonoboui-2 -lxml2 -lz -lgnomecanvas-2 -lgnome-2 -lpopt -lart_lgpl_2 -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lgdk_pixbuf-2.0 -lpangoxft-1.0 -lpangox-1.0 -lpangoft2-1.0 -lpango-1.0 -lgobject-2.0 -lgnomevfs-2 -lbonobo-2 -lgconf-2 -lbonobo-activation -lORBit-2 -lm -lgmodule-2.0 -ldl -lgthread-2.0 -lglib-2.0 -lgncmod-network-utils -Wl,--export-dynamic -lgnomeprintui-2-2 -lgnomeprint-2-2 -lgnomecanvas-2 -lxml2 -lz -lart_lgpl_2 -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lgdk_pixbuf-2.0 -lm -lpangoxft-1.0 -lpangox-1.0 -lpangoft2-1.0 -lpango-1.0 -lgobject-2.0 -lgmodule-2.0 -ldl -lglib-2.0 -Wl,--export-dynamic -pthread -L/usr/X11R6/lib -lgtkhtml-3.1 -lgnomeui-2 -lSM -lICE -lgnomeprintui-2-2 -lglade-2.0 -lbonoboui-2 -lgnome-2 -lpopt -lgnomevfs-2 -lbonobo-2 -lgconf-2 -lbonobo-activation -lORBit-2 -lgthread-2.0 -lgnomeprint-2-2 -lgnomecanvas-2 -lart_lgpl_2 -lgtk-x11-2.0 -lxml2 -lz -lgdk-x11-2.0 -latk-1.0 -lgdk_pixbuf-2.0 -lm -lpangoxft-1.0 -lpangox-1.0 -lpangoft2-1.0 -lpango-1.0 -lgobject-2.0 -lgmodule-2.0 -ldl -lglib-2.0 -lglade-2.0 -lgtk-x11-2.0 -lxml2 -lz -lgdk-x11-2.0 -latk-1.0 -lgdk_pixbuf-2.0 -lm -lpangoxft-1.0 -lpangox-1.0 -lpangoft2-1.0 -lpango-1.0 -lgobject-2.0 -lgmodule-2.0 -ldl -lglib-2.0 -lgdk_pixbuf-2.0 -lm -lgobject-2.0 -lgmodule-2.0 -ldl -lglib-2.0 -lgncmod-gnome-utils -lgncmod-register-core
+GNUCASH_SEPARATE_BUILDDIR_FALSE =
+GNUCASH_SEPARATE_BUILDDIR_TRUE = #
+GOBJECT_QUERY = gobject-query
+GSF_CFLAGS = -I/usr/include/libgsf-1 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libxml2
+GSF_LIBS = -lgsf-gnome-1 -lgsf-1 -lgobject-2.0 -lxml2 -lz -lm -lglib-2.0
+GTKHTML_CFLAGS = -DXTHREADS -DORBIT2=1 -pthread -I/usr/include/libgtkhtml-3.1 -I/usr/include/gtk-2.0 -I/usr/include/libgnomeui-2.0 -I/usr/include/libgnomeprint-2.2 -I/usr/include/libgnomeprintui-2.2 -I/usr/include/libglade-2.0 -I/usr/lib/gtk-2.0/include -I/usr/X11R6/include -I/usr/include/atk-1.0 -I/usr/include/pango-1.0 -I/usr/include/freetype2 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libgnome-2.0 -I/usr/include/libgnomecanvas-2.0 -I/usr/include/libart-2.0 -I/usr/include/gconf/2 -I/usr/include/libbonoboui-2.0 -I/usr/include/orbit-2.0 -I/usr/include/libbonobo-2.0 -I/usr/include/gnome-vfs-2.0 -I/usr/lib/gnome-vfs-2.0/include -I/usr/include/bonobo-activation-2.0 -I/usr/include/libxml2
+GTKHTML_LIBS = -Wl,--export-dynamic -pthread -L/usr/X11R6/lib -lgtkhtml-3.1 -lgnomeui-2 -lSM -lICE -lgnomeprintui-2-2 -lglade-2.0 -lbonoboui-2 -lgnome-2 -lpopt -lgnomevfs-2 -lbonobo-2 -lgconf-2 -lbonobo-activation -lORBit-2 -lgthread-2.0 -lgnomeprint-2-2 -lgnomecanvas-2 -lart_lgpl_2 -lgtk-x11-2.0 -lxml2 -lz -lgdk-x11-2.0 -latk-1.0 -lgdk_pixbuf-2.0 -lm -lpangoxft-1.0 -lpangox-1.0 -lpangoft2-1.0 -lpango-1.0 -lgobject-2.0 -lgmodule-2.0 -ldl -lglib-2.0
+GTK_CFLAGS = -DXTHREADS -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/X11R6/include -I/usr/include/atk-1.0 -I/usr/include/pango-1.0 -I/usr/include/freetype2 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include
+GTK_LIBS = -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lgdk_pixbuf-2.0 -lm -lpangoxft-1.0 -lpangox-1.0 -lpangoft2-1.0 -lpango-1.0 -lgobject-2.0 -lgmodule-2.0 -ldl -lglib-2.0
+GTK_XIM_FLAGS = -DUSE_XIM
+GUILE = /usr/bin/guile
+GUILE_FALSE = #
+GUILE_INCS =
+GUILE_LIBS = -lguile -lguile-ltdl -lqthreads -lpthread -lcrypt -lm
+GUILE_TRUE =
+G_WRAP_COMPILE_ARGS = -std=gnu99
+G_WRAP_CONFIG = /usr/bin/g-wrap-config
+G_WRAP_LIB_DIR = /usr/lib/site
+G_WRAP_LINK_ARGS = -lgwrap-guile-runtime -lgwrap-core-runtime -lguile -lguile-ltdl -lqthreads -lpthread -lcrypt -lm -lffi
+G_WRAP_MODULE_DIR = /usr/share/guile/site
+HAVE_GLIB26_FALSE = #
+HAVE_GLIB26_TRUE =
+HBCI_CFLAGS =
+HBCI_DIR =
+HBCI_LIBS =
+INSTALL_DATA = ${INSTALL} -m 644
+INSTALL_PROGRAM = ${INSTALL}
+INSTALL_SCRIPT = ${INSTALL}
+INSTALL_STRIP_PROGRAM = ${SHELL} $(install_sh) -c -s
+INSTOBJEXT = .mo
+INTLLIBS =
+INTLTOOL_CAVES_RULE = %.caves: %.caves.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@
+INTLTOOL_DESKTOP_RULE = %.desktop: %.desktop.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@
+INTLTOOL_DIRECTORY_RULE = %.directory: %.directory.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@
+INTLTOOL_EXTRACT = $(top_builddir)/intltool-extract
+INTLTOOL_ICONV = /usr/bin/iconv
+INTLTOOL_KBD_RULE = %.kbd: %.kbd.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -m -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@
+INTLTOOL_KEYS_RULE = %.keys: %.keys.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -k -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@
+INTLTOOL_MERGE = $(top_builddir)/intltool-merge
+INTLTOOL_MSGFMT = /usr/bin/msgfmt
+INTLTOOL_MSGMERGE = /usr/bin/msgmerge
+INTLTOOL_OAF_RULE = %.oaf: %.oaf.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -o -p $(top_srcdir)/po $< $@
+INTLTOOL_PERL = /usr/bin/perl
+INTLTOOL_PONG_RULE = %.pong: %.pong.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@
+INTLTOOL_PROP_RULE = %.prop: %.prop.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@
+INTLTOOL_SCHEMAS_RULE = %.schemas: %.schemas.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -s -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@
+INTLTOOL_SERVER_RULE = %.server: %.server.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -o -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@
+INTLTOOL_SHEET_RULE = %.sheet: %.sheet.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@
+INTLTOOL_SOUNDLIST_RULE = %.soundlist: %.soundlist.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@
+INTLTOOL_THEME_RULE = %.theme: %.theme.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@
+INTLTOOL_UI_RULE = %.ui: %.ui.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@
+INTLTOOL_UPDATE = $(top_builddir)/intltool-update
+INTLTOOL_XAM_RULE = %.xam: %.xml.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@
+INTLTOOL_XGETTEXT = /usr/bin/xgettext
+INTLTOOL_XML_NOMERGE_RULE = %.xml: %.xml.in $(INTLTOOL_MERGE) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u /tmp $< $@
+INTLTOOL_XML_RULE = %.xml: %.xml.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< $@
+LC_MESSAGES_ENUM = LC_MESSAGES
+LDFLAGS =
+LIBGOFFICE_CFLAGS = -DXTHREADS -I/usr/include/libgoffice-1 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libgsf-1 -I/usr/include/libxml2 -I/usr/include/gtk-2.0 -I/usr/include/libglade-2.0 -I/usr/include/libgnomeprint-2.2 -I/usr/include/libart-2.0 -I/usr/lib/gtk-2.0/include -I/usr/X11R6/include -I/usr/include/atk-1.0 -I/usr/include/pango-1.0 -I/usr/include/freetype2
+LIBGOFFICE_LIBS = -Wl,--export-dynamic -lgoffice-1 -lgsf-1 -lglade-2.0 -lgnomeprint-2-2 -lgtk-x11-2.0 -lgdk-x11-2.0 -latk-1.0 -lgdk_pixbuf-2.0 -lpangoxft-1.0 -lpangox-1.0 -lpangoft2-1.0 -lart_lgpl_2 -lxml2 -lz -lm -lpango-1.0 -lgobject-2.0 -lgmodule-2.0 -ldl -lglib-2.0
+LIBGUPPI_CFLAGS =
+LIBGUPPI_LIBS =
+LIBOBJS =
+LIBOBJS_SEDSCRIPT = s,\.[^.]* ,&,g;s,\.[^.]*$$,&,
+LIBOFX_CFLAGS =
+LIBOFX_LIBS =
+LIBQOF_BACKEND_QSF_LIBRARY_VERSION =
+LIBQOF_LIBRARY_VERSION =
+LIBS = -lpopt -lm -lm
+LIBTOOL = $(SHELL) $(top_builddir)/libtool
+LIBTOOL_DEPS = ./ltmain.sh
+LIBXML2_CFLAGS = -I/usr/include/libxml2
+LIBXML2_LIBS = -lxml2 -lz -lm
+LIBXML_VERSION = 0.20
+LN_S = ln -s
+LOCALE_DIR = ${prefix}/share/locale
+LTLIBOBJS =
+MAINT =
+MAINTAINER_MODE_FALSE = #
+MAINTAINER_MODE_TRUE =
+MAKEINFO = ${SHELL} /opt/working/temp/cashutil/missing --run makeinfo
+MKINSTALLDIRS = ./mkinstalldirs
+MSGFMT = /usr/bin/msgfmt
+MT940_DIR =
+OBJEXT = o
+OFX_DIR =
+PACKAGE = gnucash
+PACKAGE_BUGREPORT = http://bugzilla.gnome.org/enter_bug.cgi?product=GnuCash
+PACKAGE_NAME = gnucash
+PACKAGE_STRING = gnucash 1.99.0
+PACKAGE_TARNAME = gnucash
+PACKAGE_VERSION = 1.99.0
+PATH_SEPARATOR = :
+PERL = /usr/bin/perl
+PERLINCL = /usr/lib/perl/5.8
+PGSQL_CFLAGS = -I/usr/include/postgresql
+PGSQL_LIBS = -L/usr/lib
+PKG_CONFIG = /usr/bin/pkg-config
+POFILES = da.po de.po el.po en_GB.po es.po es_NI.po fr.po hu.po it.po ja.po nb.po nl.po pl.po pt.po pt_BR.po ru.po rw.po sk.po sv.po ta.po uk.po zh_CN.po zh_TW.po
+POSUB = po
+PO_IN_DATADIR_FALSE =
+PO_IN_DATADIR_TRUE =
+PRINT_CFLAGS = -I/usr/include/libgnomeprint-2.2 -I/usr/include/libart-2.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libxml2 -I/usr/include/pango-1.0
+PRINT_LIBS = -Wl,--export-dynamic -lgnomeprint-2-2 -lart_lgpl_2 -lxml2 -lz -lm -lpango-1.0 -lgobject-2.0 -lgmodule-2.0 -ldl -lglib-2.0
+QOF_CFLAGS = -I/usr/include/qof -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libxml2
+QOF_LIBS = -lqof -lgda-2 -lglib-2.0 -lxml2 -lz -lm
+QOF_LIB_DIR = /usr/lib
+QOF_PREFIX = /usr
+QSF_SCHEMA_DIR = ${GNC_SHAREDIR}/xml/qsf
+QTTHREADS_LIB = -lqthreads
+RANLIB = ranlib
+READLINE_LIB = -lreadline
+RPC_DIR =
+SET_MAKE =
+SHELL = /bin/sh
+SQL_DIR = postgres
+STRIP = strip
+TERMCAP_LIB = -ltermcap
+USE_LIBGOFFICE =
+USE_LIBGOFFICE_FALSE = #
+USE_LIBGOFFICE_TRUE =
+USE_LIBQOF =
+USE_LIBQOF_FALSE =
+USE_LIBQOF_TRUE = #
+USE_NLS = yes
+VERSION = 1.99.0
+WITH_GNOME_FALSE = #
+WITH_GNOME_TRUE =
+WITH_GTK_FALSE = #
+WITH_GTK_TRUE =
+XGETTEXT = /usr/bin/xgettext
+XML_CFLAGS = -I/usr/include/libxml2
+XML_LIBS = -lxml2 -lz -lm
+ac_ct_AR = ar
+ac_ct_CC = gcc
+ac_ct_CXX = g++
+ac_ct_F77 =
+ac_ct_RANLIB = ranlib
+ac_ct_STRIP = strip
+ac_pt_PKG_CONFIG =
+am__fastdepCC_FALSE = #
+am__fastdepCC_TRUE =
+am__fastdepCXX_FALSE = #
+am__fastdepCXX_TRUE =
+am__include = include
+am__leading_dot = .
+am__quote =
+aqbanking_data =
+aqbanking_dir =
+aqbanking_includes =
+aqbanking_libs =
+aqbanking_libspp =
+aqbanking_plugins =
+bindir = ${exec_prefix}/bin
+build = i686-pc-linux-gnu
+build_alias =
+build_cpu = i686
+build_os = linux-gnu
+build_vendor = pc
+cflags_set = yes
+datadir = ${prefix}/share
+enable_dot = no
+enable_html_docs = yes
+enable_latex_docs = no
+exec_prefix = ${prefix}
+gnumeric_icondir = ${GNC_SHAREDIR}/pixmaps
+gnumeric_plugindir = ${gog_plugindir}
+gog_plugindir = ${GNC_LIBDIR}/plugins
+host = i686-pc-linux-gnu
+host_alias =
+host_cpu = i686
+host_os = linux-gnu
+host_vendor = pc
+includedir = ${prefix}/include
+infodir = ${prefix}/info
+install_sh = /opt/working/temp/cashutil/install-sh
+libdir = ${exec_prefix}/lib
+libexecdir = ${exec_prefix}/libexec
+localstatedir = ${prefix}/var
+mandir = ${prefix}/man
+oldincludedir = /usr/include
+prefix = /opt/garfield/gnccashutil
+program_transform_name = s,x,x,
+sbindir = ${exec_prefix}/sbin
+sharedstatedir = ${prefix}/com
+subdirs =
+sysconfdir = ${prefix}/etc
+target_alias =
+SUBDIRS = .
+
+EXTRA_DIST = \
+ cashutil.docbook \
+ cashutil.xml
+
+XML_CATALOG_FILES = $(XML_CATALOG_FILES) $(XSLTPROC) $(XSLTPROC_FLAGS) -o $@ $(top_srcdir)/doc/xml/docbook.xsl $<
+subdir = cashutil/doc/xml
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+DIST_SOURCES =
+
+RECURSIVE_TARGETS = info-recursive dvi-recursive pdf-recursive \
+ ps-recursive install-info-recursive uninstall-info-recursive \
+ all-recursive install-data-recursive install-exec-recursive \
+ installdirs-recursive install-recursive uninstall-recursive \
+ check-recursive installcheck-recursive
+DIST_COMMON = $(srcdir)/Makefile.in Makefile.am
+DIST_SUBDIRS = $(SUBDIRS)
+all: all-recursive
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --gnu cashutil/doc/xml/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)
+
+mostlyclean-libtool:
+ -rm -f *.lo
+
+clean-libtool:
+ -rm -rf .libs _libs
+
+distclean-libtool:
+ -rm -f libtool
+uninstall-info-am:
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+# (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+ @set fnord $$MAKEFLAGS; amf=$$2; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+ @set fnord $$MAKEFLAGS; amf=$$2; \
+ dot_seen=no; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ rev=''; for subdir in $$list; do \
+ if test "$$subdir" = "."; then :; else \
+ rev="$$subdir $$rev"; \
+ fi; \
+ done; \
+ rev="$$rev ."; \
+ target=`echo $@ | sed s/-recursive//`; \
+ for subdir in $$rev; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+ done && test -z "$$fail"
+tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+ done
+ctags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+ done
+
+ETAGS = etags
+ETAGSFLAGS =
+
+CTAGS = ctags
+CTAGSFLAGS =
+
+tags: TAGS
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ mkid -fID $$unique
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ if (etags --etags-include --version) >/dev/null 2>&1; then \
+ include_option=--etags-include; \
+ else \
+ include_option=--include; \
+ fi; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test -f $$subdir/TAGS && \
+ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(ETAGS_ARGS)$$tags$$unique" \
+ || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$tags $$unique
+
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$tags $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && cd $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+
+top_distdir = ../../..
+distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+ list='$(DISTFILES)'; for file in $$list; do \
+ case $$file in \
+ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+ esac; \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+ dir="/$$dir"; \
+ $(mkinstalldirs) "$(distdir)$$dir"; \
+ else \
+ dir=''; \
+ fi; \
+ if test -d $$d/$$file; then \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ else \
+ test -f $(distdir)/$$file \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
+ fi; \
+ done
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test -d $(distdir)/$$subdir \
+ || mkdir $(distdir)/$$subdir \
+ || exit 1; \
+ (cd $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$(top_distdir)" \
+ distdir=../$(distdir)/$$subdir \
+ distdir) \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+check: check-recursive
+all-am: Makefile
+installdirs: installdirs-recursive
+installdirs-am:
+
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-recursive
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-libtool \
+ distclean-local distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-recursive
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-info-am
+
+uninstall-info: uninstall-info-recursive
+
+.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-am clean \
+ clean-generic clean-libtool clean-recursive ctags \
+ ctags-recursive distclean distclean-generic distclean-libtool \
+ distclean-local distclean-recursive distclean-tags distdir dvi \
+ dvi-am dvi-recursive info info-am info-recursive install \
+ install-am install-data install-data-am install-data-recursive \
+ install-exec install-exec-am install-exec-recursive \
+ install-info install-info-am install-info-recursive install-man \
+ install-recursive install-strip installcheck installcheck-am \
+ installdirs installdirs-am installdirs-recursive \
+ maintainer-clean maintainer-clean-generic \
+ maintainer-clean-recursive mostlyclean mostlyclean-generic \
+ mostlyclean-libtool mostlyclean-recursive pdf pdf-am \
+ pdf-recursive ps ps-am ps-recursive tags tags-recursive \
+ uninstall uninstall-am uninstall-info-am \
+ uninstall-info-recursive uninstall-recursive
+
+
+all:
+ $(XSLTPROC) $(XSLTPROC_FLAGS) -o $(top_srcdir)/doc/man/ \
+ $(XSLTROOT)/docbook.xsl \
+ $(top_srcdir)/doc/xml/cashutil.docbook
+
+distclean-local:
+ $(RM) -f xml/catalog.xml
+ $(RM) -f xml/docbook.xsl
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
Added: gnucash/branches/cashutil/cashutil/doc/xml/Makefile.am
===================================================================
--- gnucash/branches/cashutil/cashutil/doc/xml/Makefile.am 2005-11-03 11:03:19 UTC (rev 11802)
+++ gnucash/branches/cashutil/cashutil/doc/xml/Makefile.am 2005-11-03 11:07:13 UTC (rev 11803)
@@ -0,0 +1,15 @@
+SUBDIRS= .
+
+EXTRA_DIST = \
+ cashutil.docbook \
+ cashutil.xml
+
+all:
+XML_CATALOG_FILES=$(XML_CATALOG_FILES) $(XSLTPROC) $(XSLTPROC_FLAGS) -o $@ $(top_srcdir)/doc/xml/docbook.xsl $<
+ $(XSLTPROC) $(XSLTPROC_FLAGS) -o $(top_srcdir)/doc/man/ \
+ $(XSLTROOT)/docbook.xsl \
+ $(top_srcdir)/doc/xml/cashutil.docbook
+
+distclean-local:
+ $(RM) -f xml/catalog.xml
+ $(RM) -f xml/docbook.xsl
Added: gnucash/branches/cashutil/cashutil/doc/xml/Makefile.in
===================================================================
--- gnucash/branches/cashutil/cashutil/doc/xml/Makefile.in 2005-11-03 11:03:19 UTC (rev 11802)
+++ gnucash/branches/cashutil/cashutil/doc/xml/Makefile.in 2005-11-03 11:07:13 UTC (rev 11803)
@@ -0,0 +1,651 @@
+# Makefile.in generated by automake 1.7.9 from Makefile.am.
+# @configure_input@
+
+# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
+# Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+ at SET_MAKE@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ../../..
+
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+host_triplet = @host@
+ACLOCAL = @ACLOCAL@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+AR = @AR@
+ART_CFLAGS = @ART_CFLAGS@
+ART_LIBS = @ART_LIBS@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BUILD_CASHUTIL_FALSE = @BUILD_CASHUTIL_FALSE@
+BUILD_CASHUTIL_TRUE = @BUILD_CASHUTIL_TRUE@
+BUILD_GUILE = @BUILD_GUILE@
+CATALOGS = @CATALOGS@
+CATOBJEXT = @CATOBJEXT@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DATADIRNAME = @DATADIRNAME@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DL_LIB = @DL_LIB@
+DOC_FALSE = @DOC_FALSE@
+DOC_TRUE = @DOC_TRUE@
+DOT = @DOT@
+DOXYGEN = @DOXYGEN@
+ECHO = @ECHO@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EFENCE_LIBS = @EFENCE_LIBS@
+EGREP = @EGREP@
+ENABLE_DOXYGEN_FALSE = @ENABLE_DOXYGEN_FALSE@
+ENABLE_DOXYGEN_TRUE = @ENABLE_DOXYGEN_TRUE@
+EXEEXT = @EXEEXT@
+F77 = @F77@
+FFLAGS = @FFLAGS@
+GCONF_CFLAGS = @GCONF_CFLAGS@
+GCONF_LIBS = @GCONF_LIBS@
+GCONF_SCHEMAS_INSTALL_FALSE = @GCONF_SCHEMAS_INSTALL_FALSE@
+GCONF_SCHEMAS_INSTALL_TRUE = @GCONF_SCHEMAS_INSTALL_TRUE@
+GCONF_SCHEMA_CONFIG_SOURCE = @GCONF_SCHEMA_CONFIG_SOURCE@
+GCONF_SCHEMA_CONFIG_SOURCE_DIRONLY = @GCONF_SCHEMA_CONFIG_SOURCE_DIRONLY@
+GCONF_SCHEMA_FILE_DIR = @GCONF_SCHEMA_FILE_DIR@
+GDK_PIXBUF_CFLAGS = @GDK_PIXBUF_CFLAGS@
+GDK_PIXBUF_LIBS = @GDK_PIXBUF_LIBS@
+GETTEXT_PACKAGE = @GETTEXT_PACKAGE@
+GLADE_CFLAGS = @GLADE_CFLAGS@
+GLADE_LIBS = @GLADE_LIBS@
+GLIB_CFLAGS = @GLIB_CFLAGS@
+GLIB_GENMARSHAL = @GLIB_GENMARSHAL@
+GLIB_LIBS = @GLIB_LIBS@
+GLIB_MKENUMS = @GLIB_MKENUMS@
+GMOFILES = @GMOFILES@
+GMSGFMT = @GMSGFMT@
+GNC_ACCOUNTS_DIR = @GNC_ACCOUNTS_DIR@
+GNC_ADD_ON_SRFIS = @GNC_ADD_ON_SRFIS@
+GNC_CONFIGDIR = @GNC_CONFIGDIR@
+GNC_CTAGS_FILE = @GNC_CTAGS_FILE@
+GNC_CTAGS_FILE_FALSE = @GNC_CTAGS_FILE_FALSE@
+GNC_CTAGS_FILE_TRUE = @GNC_CTAGS_FILE_TRUE@
+GNC_DOC_INSTALL_DIR = @GNC_DOC_INSTALL_DIR@
+GNC_ETAGS_FILE = @GNC_ETAGS_FILE@
+GNC_ETAGS_FILE_FALSE = @GNC_ETAGS_FILE_FALSE@
+GNC_ETAGS_FILE_TRUE = @GNC_ETAGS_FILE_TRUE@
+GNC_FALSE_FALSE = @GNC_FALSE_FALSE@
+GNC_FALSE_TRUE = @GNC_FALSE_TRUE@
+GNC_GLADE_DIR = @GNC_GLADE_DIR@
+GNC_GWRAP_LIBDIR = @GNC_GWRAP_LIBDIR@
+GNC_HAVE_GUILE_WWW_FALSE = @GNC_HAVE_GUILE_WWW_FALSE@
+GNC_HAVE_GUILE_WWW_TRUE = @GNC_HAVE_GUILE_WWW_TRUE@
+GNC_HELPDIR = @GNC_HELPDIR@
+GNC_INCLUDE_DIR = @GNC_INCLUDE_DIR@
+GNC_LIBDIR = @GNC_LIBDIR@
+GNC_LIBEXECDIR = @GNC_LIBEXECDIR@
+GNC_MODULE_DIR = @GNC_MODULE_DIR@
+GNC_PIXMAP_DIR = @GNC_PIXMAP_DIR@
+GNC_SCM_INSTALL_DIR = @GNC_SCM_INSTALL_DIR@
+GNC_SHAREDIR = @GNC_SHAREDIR@
+GNC_SRFI_LOAD_PATH = @GNC_SRFI_LOAD_PATH@
+GNC_TEST_SRFI_LOAD_CMD = @GNC_TEST_SRFI_LOAD_CMD@
+GNC_UI_DIR = @GNC_UI_DIR@
+GNOME_CFLAGS = @GNOME_CFLAGS@
+GNOME_LIBS = @GNOME_LIBS@
+GNOME_PRINT_CFLAGS = @GNOME_PRINT_CFLAGS@
+GNOME_PRINT_LIBS = @GNOME_PRINT_LIBS@
+GNUCASH_APP_UTILS_CFLAGS = @GNUCASH_APP_UTILS_CFLAGS@
+GNUCASH_APP_UTILS_LIBS = @GNUCASH_APP_UTILS_LIBS@
+GNUCASH_ENABLE_GUI_FALSE = @GNUCASH_ENABLE_GUI_FALSE@
+GNUCASH_ENABLE_GUI_TRUE = @GNUCASH_ENABLE_GUI_TRUE@
+GNUCASH_ENGINE_BASE_CFLAGS = @GNUCASH_ENGINE_BASE_CFLAGS@
+GNUCASH_ENGINE_BASE_LIBS = @GNUCASH_ENGINE_BASE_LIBS@
+GNUCASH_ENGINE_CFLAGS = @GNUCASH_ENGINE_CFLAGS@
+GNUCASH_ENGINE_LIBS = @GNUCASH_ENGINE_LIBS@
+GNUCASH_GNOME_UTILS_CFLAGS = @GNUCASH_GNOME_UTILS_CFLAGS@
+GNUCASH_GNOME_UTILS_LIBS = @GNUCASH_GNOME_UTILS_LIBS@
+GNUCASH_MAJOR_VERSION = @GNUCASH_MAJOR_VERSION@
+GNUCASH_MICRO_VERSION = @GNUCASH_MICRO_VERSION@
+GNUCASH_MINOR_VERSION = @GNUCASH_MINOR_VERSION@
+GNUCASH_NETWORK_UTILS_CFLAGS = @GNUCASH_NETWORK_UTILS_CFLAGS@
+GNUCASH_NETWORK_UTILS_LIBS = @GNUCASH_NETWORK_UTILS_LIBS@
+GNUCASH_REGISTER_CORE_CFLAGS = @GNUCASH_REGISTER_CORE_CFLAGS@
+GNUCASH_REGISTER_CORE_LIBS = @GNUCASH_REGISTER_CORE_LIBS@
+GNUCASH_SEPARATE_BUILDDIR_FALSE = @GNUCASH_SEPARATE_BUILDDIR_FALSE@
+GNUCASH_SEPARATE_BUILDDIR_TRUE = @GNUCASH_SEPARATE_BUILDDIR_TRUE@
+GOBJECT_QUERY = @GOBJECT_QUERY@
+GSF_CFLAGS = @GSF_CFLAGS@
+GSF_LIBS = @GSF_LIBS@
+GTKHTML_CFLAGS = @GTKHTML_CFLAGS@
+GTKHTML_LIBS = @GTKHTML_LIBS@
+GTK_CFLAGS = @GTK_CFLAGS@
+GTK_LIBS = @GTK_LIBS@
+GTK_XIM_FLAGS = @GTK_XIM_FLAGS@
+GUILE = @GUILE@
+GUILE_FALSE = @GUILE_FALSE@
+GUILE_INCS = @GUILE_INCS@
+GUILE_LIBS = @GUILE_LIBS@
+GUILE_TRUE = @GUILE_TRUE@
+G_WRAP_COMPILE_ARGS = @G_WRAP_COMPILE_ARGS@
+G_WRAP_CONFIG = @G_WRAP_CONFIG@
+G_WRAP_LIB_DIR = @G_WRAP_LIB_DIR@
+G_WRAP_LINK_ARGS = @G_WRAP_LINK_ARGS@
+G_WRAP_MODULE_DIR = @G_WRAP_MODULE_DIR@
+HAVE_GLIB26_FALSE = @HAVE_GLIB26_FALSE@
+HAVE_GLIB26_TRUE = @HAVE_GLIB26_TRUE@
+HBCI_CFLAGS = @HBCI_CFLAGS@
+HBCI_DIR = @HBCI_DIR@
+HBCI_LIBS = @HBCI_LIBS@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INSTOBJEXT = @INSTOBJEXT@
+INTLLIBS = @INTLLIBS@
+INTLTOOL_CAVES_RULE = @INTLTOOL_CAVES_RULE@
+INTLTOOL_DESKTOP_RULE = @INTLTOOL_DESKTOP_RULE@
+INTLTOOL_DIRECTORY_RULE = @INTLTOOL_DIRECTORY_RULE@
+INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@
+INTLTOOL_ICONV = @INTLTOOL_ICONV@
+INTLTOOL_KBD_RULE = @INTLTOOL_KBD_RULE@
+INTLTOOL_KEYS_RULE = @INTLTOOL_KEYS_RULE@
+INTLTOOL_MERGE = @INTLTOOL_MERGE@
+INTLTOOL_MSGFMT = @INTLTOOL_MSGFMT@
+INTLTOOL_MSGMERGE = @INTLTOOL_MSGMERGE@
+INTLTOOL_OAF_RULE = @INTLTOOL_OAF_RULE@
+INTLTOOL_PERL = @INTLTOOL_PERL@
+INTLTOOL_PONG_RULE = @INTLTOOL_PONG_RULE@
+INTLTOOL_PROP_RULE = @INTLTOOL_PROP_RULE@
+INTLTOOL_SCHEMAS_RULE = @INTLTOOL_SCHEMAS_RULE@
+INTLTOOL_SERVER_RULE = @INTLTOOL_SERVER_RULE@
+INTLTOOL_SHEET_RULE = @INTLTOOL_SHEET_RULE@
+INTLTOOL_SOUNDLIST_RULE = @INTLTOOL_SOUNDLIST_RULE@
+INTLTOOL_THEME_RULE = @INTLTOOL_THEME_RULE@
+INTLTOOL_UI_RULE = @INTLTOOL_UI_RULE@
+INTLTOOL_UPDATE = @INTLTOOL_UPDATE@
+INTLTOOL_XAM_RULE = @INTLTOOL_XAM_RULE@
+INTLTOOL_XGETTEXT = @INTLTOOL_XGETTEXT@
+INTLTOOL_XML_NOMERGE_RULE = @INTLTOOL_XML_NOMERGE_RULE@
+INTLTOOL_XML_RULE = @INTLTOOL_XML_RULE@
+LC_MESSAGES_ENUM = @LC_MESSAGES_ENUM@
+LDFLAGS = @LDFLAGS@
+LIBGOFFICE_CFLAGS = @LIBGOFFICE_CFLAGS@
+LIBGOFFICE_LIBS = @LIBGOFFICE_LIBS@
+LIBGUPPI_CFLAGS = @LIBGUPPI_CFLAGS@
+LIBGUPPI_LIBS = @LIBGUPPI_LIBS@
+LIBOBJS = @LIBOBJS@
+LIBOBJS_SEDSCRIPT = @LIBOBJS_SEDSCRIPT@
+LIBOFX_CFLAGS = @LIBOFX_CFLAGS@
+LIBOFX_LIBS = @LIBOFX_LIBS@
+LIBQOF_BACKEND_QSF_LIBRARY_VERSION = @LIBQOF_BACKEND_QSF_LIBRARY_VERSION@
+LIBQOF_LIBRARY_VERSION = @LIBQOF_LIBRARY_VERSION@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIBTOOL_DEPS = @LIBTOOL_DEPS@
+LIBXML2_CFLAGS = @LIBXML2_CFLAGS@
+LIBXML2_LIBS = @LIBXML2_LIBS@
+LIBXML_VERSION = @LIBXML_VERSION@
+LN_S = @LN_S@
+LOCALE_DIR = @LOCALE_DIR@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
+MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
+MAKEINFO = @MAKEINFO@
+MKINSTALLDIRS = @MKINSTALLDIRS@
+MSGFMT = @MSGFMT@
+MT940_DIR = @MT940_DIR@
+OBJEXT = @OBJEXT@
+OFX_DIR = @OFX_DIR@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PERL = @PERL@
+PERLINCL = @PERLINCL@
+PGSQL_CFLAGS = @PGSQL_CFLAGS@
+PGSQL_LIBS = @PGSQL_LIBS@
+PKG_CONFIG = @PKG_CONFIG@
+POFILES = @POFILES@
+POSUB = @POSUB@
+PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@
+PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@
+PRINT_CFLAGS = @PRINT_CFLAGS@
+PRINT_LIBS = @PRINT_LIBS@
+QOF_CFLAGS = @QOF_CFLAGS@
+QOF_LIBS = @QOF_LIBS@
+QOF_LIB_DIR = @QOF_LIB_DIR@
+QOF_PREFIX = @QOF_PREFIX@
+QSF_SCHEMA_DIR = @QSF_SCHEMA_DIR@
+QTTHREADS_LIB = @QTTHREADS_LIB@
+RANLIB = @RANLIB@
+READLINE_LIB = @READLINE_LIB@
+RPC_DIR = @RPC_DIR@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SQL_DIR = @SQL_DIR@
+STRIP = @STRIP@
+TERMCAP_LIB = @TERMCAP_LIB@
+USE_LIBGOFFICE = @USE_LIBGOFFICE@
+USE_LIBGOFFICE_FALSE = @USE_LIBGOFFICE_FALSE@
+USE_LIBGOFFICE_TRUE = @USE_LIBGOFFICE_TRUE@
+USE_LIBQOF = @USE_LIBQOF@
+USE_LIBQOF_FALSE = @USE_LIBQOF_FALSE@
+USE_LIBQOF_TRUE = @USE_LIBQOF_TRUE@
+USE_NLS = @USE_NLS@
+VERSION = @VERSION@
+WITH_GNOME_FALSE = @WITH_GNOME_FALSE@
+WITH_GNOME_TRUE = @WITH_GNOME_TRUE@
+WITH_GTK_FALSE = @WITH_GTK_FALSE@
+WITH_GTK_TRUE = @WITH_GTK_TRUE@
+XGETTEXT = @XGETTEXT@
+XML_CFLAGS = @XML_CFLAGS@
+XML_LIBS = @XML_LIBS@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_F77 = @ac_ct_F77@
+ac_ct_RANLIB = @ac_ct_RANLIB@
+ac_ct_STRIP = @ac_ct_STRIP@
+ac_pt_PKG_CONFIG = @ac_pt_PKG_CONFIG@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
+am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+aqbanking_data = @aqbanking_data@
+aqbanking_dir = @aqbanking_dir@
+aqbanking_includes = @aqbanking_includes@
+aqbanking_libs = @aqbanking_libs@
+aqbanking_libspp = @aqbanking_libspp@
+aqbanking_plugins = @aqbanking_plugins@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+cflags_set = @cflags_set@
+datadir = @datadir@
+enable_dot = @enable_dot@
+enable_html_docs = @enable_html_docs@
+enable_latex_docs = @enable_latex_docs@
+exec_prefix = @exec_prefix@
+gnumeric_icondir = @gnumeric_icondir@
+gnumeric_plugindir = @gnumeric_plugindir@
+gog_plugindir = @gog_plugindir@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+subdirs = @subdirs@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+SUBDIRS = .
+
+EXTRA_DIST = \
+ cashutil.docbook \
+ cashutil.xml
+
+XML_CATALOG_FILES = $(XML_CATALOG_FILES) $(XSLTPROC) $(XSLTPROC_FLAGS) -o $@ $(top_srcdir)/doc/xml/docbook.xsl $<
+subdir = cashutil/doc/xml
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+DIST_SOURCES =
+
+RECURSIVE_TARGETS = info-recursive dvi-recursive pdf-recursive \
+ ps-recursive install-info-recursive uninstall-info-recursive \
+ all-recursive install-data-recursive install-exec-recursive \
+ installdirs-recursive install-recursive uninstall-recursive \
+ check-recursive installcheck-recursive
+DIST_COMMON = $(srcdir)/Makefile.in Makefile.am
+DIST_SUBDIRS = $(SUBDIRS)
+all: all-recursive
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --gnu cashutil/doc/xml/Makefile
+Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)
+
+mostlyclean-libtool:
+ -rm -f *.lo
+
+clean-libtool:
+ -rm -rf .libs _libs
+
+distclean-libtool:
+ -rm -f libtool
+uninstall-info-am:
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+# (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+ @set fnord $$MAKEFLAGS; amf=$$2; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+ @set fnord $$MAKEFLAGS; amf=$$2; \
+ dot_seen=no; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ rev=''; for subdir in $$list; do \
+ if test "$$subdir" = "."; then :; else \
+ rev="$$subdir $$rev"; \
+ fi; \
+ done; \
+ rev="$$rev ."; \
+ target=`echo $@ | sed s/-recursive//`; \
+ for subdir in $$rev; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+ done && test -z "$$fail"
+tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+ done
+ctags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+ done
+
+ETAGS = etags
+ETAGSFLAGS =
+
+CTAGS = ctags
+CTAGSFLAGS =
+
+tags: TAGS
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ mkid -fID $$unique
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ if (etags --etags-include --version) >/dev/null 2>&1; then \
+ include_option=--etags-include; \
+ else \
+ include_option=--include; \
+ fi; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test -f $$subdir/TAGS && \
+ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(ETAGS_ARGS)$$tags$$unique" \
+ || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$tags $$unique
+
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$tags $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && cd $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+
+top_distdir = ../../..
+distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+ list='$(DISTFILES)'; for file in $$list; do \
+ case $$file in \
+ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+ esac; \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+ dir="/$$dir"; \
+ $(mkinstalldirs) "$(distdir)$$dir"; \
+ else \
+ dir=''; \
+ fi; \
+ if test -d $$d/$$file; then \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ else \
+ test -f $(distdir)/$$file \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
+ fi; \
+ done
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test -d $(distdir)/$$subdir \
+ || mkdir $(distdir)/$$subdir \
+ || exit 1; \
+ (cd $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$(top_distdir)" \
+ distdir=../$(distdir)/$$subdir \
+ distdir) \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+check: check-recursive
+all-am: Makefile
+installdirs: installdirs-recursive
+installdirs-am:
+
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-recursive
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-libtool \
+ distclean-local distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-recursive
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-info-am
+
+uninstall-info: uninstall-info-recursive
+
+.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-am clean \
+ clean-generic clean-libtool clean-recursive ctags \
+ ctags-recursive distclean distclean-generic distclean-libtool \
+ distclean-local distclean-recursive distclean-tags distdir dvi \
+ dvi-am dvi-recursive info info-am info-recursive install \
+ install-am install-data install-data-am install-data-recursive \
+ install-exec install-exec-am install-exec-recursive \
+ install-info install-info-am install-info-recursive install-man \
+ install-recursive install-strip installcheck installcheck-am \
+ installdirs installdirs-am installdirs-recursive \
+ maintainer-clean maintainer-clean-generic \
+ maintainer-clean-recursive mostlyclean mostlyclean-generic \
+ mostlyclean-libtool mostlyclean-recursive pdf pdf-am \
+ pdf-recursive ps ps-am ps-recursive tags tags-recursive \
+ uninstall uninstall-am uninstall-info-am \
+ uninstall-info-recursive uninstall-recursive
+
+
+all:
+ $(XSLTPROC) $(XSLTPROC_FLAGS) -o $(top_srcdir)/doc/man/ \
+ $(XSLTROOT)/docbook.xsl \
+ $(top_srcdir)/doc/xml/cashutil.docbook
+
+distclean-local:
+ $(RM) -f xml/catalog.xml
+ $(RM) -f xml/docbook.xsl
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
Added: gnucash/branches/cashutil/cashutil/doc/xml/cashutil.docbook
===================================================================
--- gnucash/branches/cashutil/cashutil/doc/xml/cashutil.docbook 2005-11-03 11:03:19 UTC (rev 11802)
+++ gnucash/branches/cashutil/cashutil/doc/xml/cashutil.docbook 2005-11-03 11:07:13 UTC (rev 11803)
@@ -0,0 +1,15 @@
+<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook V4.1//EN"
+ "http://www.oasis-open.org/docbook/xml/4.1/docbookx.dtd" [
+<!ENTITY cashutil SYSTEM "cashutil.xml">
+ ]>
+<book label="cashutil" status="0.0.1">
+<chapter label="1" id="manpages">
+<title>manpages</title>
+<para>
+The CashUtil manpage is automatically generated from
+DocBook using xsltproc. The HTML version for the
+website can be generated manually using docbook2html.
+</para>
+&cashutil;
+</chapter>
+</book>
Added: gnucash/branches/cashutil/cashutil/doc/xml/cashutil.xml
===================================================================
--- gnucash/branches/cashutil/cashutil/doc/xml/cashutil.xml 2005-11-03 11:03:19 UTC (rev 11802)
+++ gnucash/branches/cashutil/cashutil/doc/xml/cashutil.xml 2005-11-03 11:07:13 UTC (rev 11803)
@@ -0,0 +1,495 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<refentry id="cashutil">
+ <refmeta>
+ <refentrytitle>cashutil</refentrytitle>
+ <manvolnum>1</manvolnum>
+ <refmiscinfo>Copyright FSF 1996-2005</refmiscinfo>
+ </refmeta>
+ <refnamediv>
+ <refname>cashutil</refname>
+ <refpurpose>
+ Querying GnuCash data as objects using QOF.
+ </refpurpose>
+ </refnamediv>
+ <refsect1>
+ <title>synopsis</title>
+ <para><emphasis>cashutil</emphasis>
+ [<option>--version</option>] |
+ [<option>-?</option>|<option>--help</option>] |
+ [<option>--usage</option>] |
+ [<option>-i</option>|<option>--input</option>
+ <userinput>filename</userinput>] |
+ [<option>-l</option>|<option>--list</option>] |
+ [<option>--explain</option>] |
+ [ [<option>-d</option>|<option>--database</option>
+ <userinput>string</userinput>] |
+ [<option>-e</option>|<option>--exclude</option>
+ <userinput>string</userinput>] ]
+ [<option>-t</option>|<option>--date</option>
+ <userinput>string</userinput>]
+ [ [<option>-s</option>|<option>--sql</option>
+ <userinput>string</userinput>] |
+ [<option>-f</option>|<option>--sql-file</option>
+ <userinput>filename</userinput>] ]
+ [<option>-w</option>|<option>--write</option>
+ <userinput>filename</userinput>]
+ [<option>--compress</option>
+ <userinput>integer [0]</userinput>]
+ [<option>--debug</option>]
+ </para>
+ <para><emphasis>cashutil</emphasis>
+ <option>--shell</option>
+ [<option>-w</option>|<option>--write</option>
+ <userinput>filename</userinput>]
+ [<option>--debug</option>]
+ [<option>--compress</option>
+ <userinput>integer [0]</userinput>]
+ </para>
+ </refsect1>
+ <refsect1>
+ <title>Description</title>
+ <para>CashUtil provides access to GnuCash data as queriable objects.
+ Cashutil can write selected GnuCash data to QSF XML and
+ runs SQL-type queries on the XML file.
+ </para>
+ </refsect1>
+ <refsect1>
+ <title>Commands</title>
+ <para>Use exactly one of -i, -l, --shell or --explain.</para>
+ <variablelist>
+ <varlistentry>
+ <term>
+ <option>-i</option>,
+ <option>--input</option>
+ <filename>filename</filename>
+ </term>
+ <listitem>
+ <para>
+ Query the offline storage in <filename>filename</filename>
+ </para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <option>-l</option>,
+ <option>--list</option>
+ </term>
+ <listitem>
+ <para>
+ Lists all databases supported by the current QOF framework.
+ Any options are ignored.
+ </para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <option>--explain</option>
+ </term>
+ <listitem>
+ <para>
+ List the fields within the specified database and exit, requires -d.
+ </para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <option>--version</option>
+ </term>
+ <listitem>
+ <para>
+ Display version of <emphasis>cashutil</emphasis>.
+ </para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <option>--shell</option>
+ </term>
+ <listitem>
+ <para>Start the QOF interactive shell.</para>
+ </listitem>
+ </varlistentry>
+ </variablelist>
+ </refsect1>
+ <refsect1>
+ <title>Shell commands</title>
+ <para>
+ The shell provides interactive data input and export using a top level shell
+ and sub shells. The top level shell provides book-level interaction -
+ load, write, merge - as well as access to the sub shells. Editing an existing instance
+ uses a sub shell to select the instance to edit and supports editing parameter
+ values, printing the instance data and deleting the instance. Adding an instance
+ simply loads an editing shell with the new instance pre-selected. All shell commands,
+ including help, are context-sensitive. e.g. in the top shell, explain requires an object
+ type argument, in a sub shell where the object type is already set, explain does not
+ require an argument.
+ </para>
+ <para>The shell prompt indicates the current shell type:</para>
+ <para>Top level shell:</para>
+ <blockquote>
+ <computeroutput>cashutil> </computeroutput>
+ </blockquote>
+ <para>Select / Edit shell for an Account:</para>
+ <blockquote>
+ <computeroutput>cash/Account> </computeroutput>
+ </blockquote>
+ <refsect2>
+ <title>Top level shell commands</title>
+ <variablelist>
+ <varlistentry>
+ <term>
+ <option>add</option> <userinput>[object]</userinput>
+ </term>
+ <listitem>
+ <para>Add a new instance of the object and load a sub-shell
+ with this instance pre-selected to edit the parameter values.</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <option>edit</option><userinput> [object]</userinput>
+ </term>
+ <listitem>
+ <para>Select one instance and edit the parameter values.</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <option>delete</option> <userinput>[object]</userinput>
+ </term>
+ <listitem>
+ <para>Select one instance for deletion.</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <option>list</option>
+ </term>
+ <listitem>
+ <para>Synonym for the --list command outside the shell.</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <option>print</option> <userinput>[object]</userinput>
+ </term>
+ <listitem>
+ <para>Select one instance and print the parameter values.</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <option>explain</option>
+ </term>
+ <listitem>
+ <para>Like the --explain command outside the shell. In the top
+ level shell, explains the specified object. In a sub-shell,
+ explains the object in use.</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <option>load</option> <userinput>[filename]</userinput>
+ </term>
+ <listitem>
+ <para>
+ Replace the current book with data from the file.
+ Prompt to save the current book, if any.
+ </para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <option>write</option> <userinput>[filename]</userinput>
+ </term>
+ <listitem>
+ <para>
+ Write out the current book. If no filename is given,
+ write to the original file. (uses STDOUT if STDIN is used.)
+ </para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <option>merge</option> <userinput>[filename]</userinput>
+ </term>
+ <listitem>
+ <para>
+ Merge data from the file into the current book.
+ </para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <option>sql</option>
+ </term>
+ <listitem>
+ <para>
+ Run a SQL statement.
+ </para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <option>help</option> | <option>?</option>
+ </term>
+ <listitem>
+ <para>
+ The help for the top level shell.
+ </para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <option>quit</option> | <option>q</option> | <option>exit</option>
+ </term>
+ <listitem>
+ <para>
+ Quit the shell.
+ </para>
+ </listitem>
+ </varlistentry>
+ </variablelist>
+ </refsect2>
+ <refsect2>
+ <title>Sub shell commands</title>
+ <variablelist>
+ <varlistentry>
+ <term>
+ <option>edit</option><userinput> [parameter]</userinput> <userinput> [value]</userinput>
+ </term>
+ <listitem>
+ <para>Edit/set the value in the specified parameter of the current object.</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <option>explain</option>
+ </term>
+ <listitem>
+ <para>Like the --explain command outside the shell. In a sub-shell,
+ explain parameter names and types of the object in use.</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <option>print</option>
+ </term>
+ <listitem>
+ <para>Print the parameter values of the current instance. Useful to check
+ the values before and after an edit.</para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <option>help</option> | <option>?</option>
+ </term>
+ <listitem>
+ <para>
+ The context-sensitive help for the sub-shell.
+ </para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <option>quit</option> | <option>q</option> | <option>exit</option>
+ </term>
+ <listitem>
+ <para>
+ Quit the sub-shell.
+ </para>
+ </listitem>
+ </varlistentry>
+ </variablelist>
+ </refsect2>
+ </refsect1>
+ <refsect1>
+ <title>Options</title>
+ <refsect2>
+ <title>cashutil options</title>
+ <para>Use -dte, optionally with either -s or -f, followed by -w.
+ </para>
+ <variablelist>
+ <varlistentry>
+ <term>
+ <option>-d</option>,
+ <option>--database</option>
+ <userinput>string</userinput>
+ </term>
+ <listitem>
+ <para>
+ Shorthand to only query objects within one
+ specific supported database.
+ </para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <option>-t</option>,
+ <option>--date</option>
+ <userinput>string</userinput>
+ </term>
+ <listitem>
+ <para>
+ Shorthand to only query objects that contain the specified date.
+ Specify dates using YY-MM-DD, YY-MM or just YY. Single digits
+ can omit the leading zero, e.g. 04-12-1, 1st December 2004 - years
+ less than 100 are assumed to be in the 21st century.
+ Years prior to 2000 can be specified as YYYY-MM-DD etc.
+ This value is taken as a range, 05-03-01 includes all times
+ between Tue Mar 1 00:00:00 UTC 2005 and Tue Mar 1 23:59:59 UTC 2005.
+ 05-03 includes all dates and times between Tue Mar 1 00:00:00 UTC 2005
+ and Thu Mar 31 23:59:59 UTC 2005. 05 includes all dates and times in 2005.
+ </para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <option>-e</option>,
+ <option>--exclude</option>
+ <userinput>string</userinput>
+ </term>
+ <listitem>
+ <para>
+ Shorthand to exclude a supported database from the query.
+ </para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <option>-s</option>,
+ <option>--sql</option>
+ <userinput>string</userinput>
+ </term>
+ <listitem>
+ <para>
+ Specify a SQL query on the command line.
+ </para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <option>-f</option>,
+ <option>--sql-file</option>
+ <userinput>filename</userinput>
+ </term>
+ <listitem>
+ <para>
+ Specify one or more SQL queries contained in a file.
+ </para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <option>-w</option>,
+ <option>--write</option>
+ <userinput>filename</userinput>
+ </term>
+ <listitem>
+ <para>
+ Write the results of any query to the file.
+ </para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <option>--compress</option>
+ <userinput>integer [0]</userinput>
+ </term>
+ <listitem>
+ <para>The level of compression to use on the output file.
+ Use zero for no compression, a number from 1 to 9 increases
+ the level of compression. Unless the file is very large,
+ values over 4 produce little or no extra compression.
+ The default is zero, no compression.</para>
+ <para>Compression is not available when using STDOUT.</para>
+ <para>The use of file extensions is entirely up to the user.
+ CashUtil does not require files to have any particular
+ extension, compression is automatically detected if used.
+ </para>
+ <para>CashUtil does <emphasis>NOT</emphasis>, therefore,
+ add a .gz extension for you. (Neither does it add or require
+ a .xml or .xml.gz extension.)
+ </para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <option>--debug</option>
+ </term>
+ <listitem>
+ <para>Enable debug output
+ using <filename>/tmp/cashutil.trace</filename> which will
+ be created if it does not exist or overwritten it if it does.
+ If this fails, creates a temporary trace file in
+ <filename>/tmp</filename> or uses <filename>stderr</filename>.
+ </para>
+ </listitem>
+ </varlistentry>
+ </variablelist>
+ </refsect2>
+ <refsect2>
+ <title>help options</title>
+ <variablelist>
+ <varlistentry>
+ <term>
+ <option>-?</option>, <option>--help</option>
+ </term>
+ <listitem>
+ <para>
+ Display the help synopsis for <emphasis>cashutil</emphasis>
+ and exit.
+ </para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term>
+ <option>--usage</option>
+ </term>
+ <listitem>
+ <para>Display a brief usage message and exit.</para>
+ </listitem>
+ </varlistentry>
+ </variablelist>
+ </refsect2>
+ </refsect1>
+ <refsect1>
+ <title>Return values</title>
+ <para>CashUtil returns zero on success or negative one on error.
+ </para>
+ </refsect1>
+ <refsect1>
+ <title>Author</title>
+ <para><emphasis>cashutil</emphasis> was written
+ by Neil Williams <email>linux at codehelp.co.uk</email>.
+ </para>
+ <para>This manual page was written by Neil Williams
+ <email>linux at codehelp.co.uk</email>
+ </para>
+ </refsect1>
+ <refsect1>
+ <title>Reporting Bugs</title>
+ <para>Please do NOT report bugs in cashutil to GnuCash.
+ Report bugs via the QOF-devel mailing list.</para>
+ <para><emphasis>http://lists.sourceforge.net/lists/listinfo/qof-devel</emphasis>
+ </para>
+ </refsect1>
+ <refsect1>
+ <title>Copyright</title>
+ <para>This program is free software; you can redistribute it and/or
+ modify it under the terms of the GNU General Public License as
+ published by the Free Software Foundation; either version 2 of the
+ License, or (at your option) any later version.
+ </para>
+ <para>This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ General Public License for more details.
+ </para>
+ <para>You should have received a copy of the GNU General Public
+ License along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ USA
+ </para>
+ </refsect1>
+</refentry>
Added: gnucash/branches/cashutil/cashutil/doc/xml/catalog.xml
===================================================================
--- gnucash/branches/cashutil/cashutil/doc/xml/catalog.xml 2005-11-03 11:03:19 UTC (rev 11802)
+++ gnucash/branches/cashutil/cashutil/doc/xml/catalog.xml 2005-11-03 11:07:13 UTC (rev 11803)
@@ -0,0 +1,17 @@
+<?xml version='1.0'?>
+<!DOCTYPE catalog PUBLIC "-//OASIS/DTD Entity Resolution XML Catalog V1.0//EN"
+ "http://www.oasis-open.org/committees/entity/release/1.0/catalog.dtd">
+<catalog xmlns="urn:oasis:names:tc:entity:xmlns:xml:catalog">
+ <nextCatalog catalog="" />
+
+ <uri name="http://docbook.sourceforge.net/release/xsl/current/html/docbook.xsl"
+ uri="/html/docbook.xsl"/>
+ <uri name="http://docbook.sourceforge.net/release/xsl/current/manpages/synop.xsl"
+ uri="/manpages/synop.xsl"/>
+ <uri name="http://docbook.sourceforge.net/release/xsl/current/manpages/lists.xsl"
+ uri="/manpages/lists.xsl"/>
+ <uri name="http://docbook.sourceforge.net/release/xsl/current/manpages/xref.xsl"
+ uri="/manpages/xref.xsl"/>
+
+ <uri name="manpages/docbook.xsl" uri="/docbook.xsl"/>
+</catalog>
Added: gnucash/branches/cashutil/cashutil/doc/xml/catalog.xml.in
===================================================================
--- gnucash/branches/cashutil/cashutil/doc/xml/catalog.xml.in 2005-11-03 11:03:19 UTC (rev 11802)
+++ gnucash/branches/cashutil/cashutil/doc/xml/catalog.xml.in 2005-11-03 11:07:13 UTC (rev 11803)
@@ -0,0 +1,17 @@
+<?xml version='1.0'?>
+<!DOCTYPE catalog PUBLIC "-//OASIS/DTD Entity Resolution XML Catalog V1.0//EN"
+ "http://www.oasis-open.org/committees/entity/release/1.0/catalog.dtd">
+<catalog xmlns="urn:oasis:names:tc:entity:xmlns:xml:catalog">
+ <nextCatalog catalog="@XML_CATALOG@" />
+ @CAT_ENTRY_START@
+ <uri name="http://docbook.sourceforge.net/release/xsl/current/html/docbook.xsl"
+ uri="@DOCBOOK_ROOT@/html/docbook.xsl"/>
+ <uri name="http://docbook.sourceforge.net/release/xsl/current/manpages/synop.xsl"
+ uri="@DOCBOOK_ROOT@/manpages/synop.xsl"/>
+ <uri name="http://docbook.sourceforge.net/release/xsl/current/manpages/lists.xsl"
+ uri="@DOCBOOK_ROOT@/manpages/lists.xsl"/>
+ <uri name="http://docbook.sourceforge.net/release/xsl/current/manpages/xref.xsl"
+ uri="@DOCBOOK_ROOT@/manpages/xref.xsl"/>
+ @CAT_ENTRY_END@
+ <uri name="manpages/docbook.xsl" uri="@XSLTROOT@/docbook.xsl"/>
+</catalog>
Added: gnucash/branches/cashutil/cashutil/doc/xml/docbook.xsl
===================================================================
--- gnucash/branches/cashutil/cashutil/doc/xml/docbook.xsl 2005-11-03 11:03:19 UTC (rev 11802)
+++ gnucash/branches/cashutil/cashutil/doc/xml/docbook.xsl 2005-11-03 11:07:13 UTC (rev 11803)
@@ -0,0 +1,557 @@
+<?xml version='1.0'?>
+<!-- vim:set sts=2 shiftwidth=2 syntax=sgml: -->
+<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
+ version='1.0'>
+
+<xsl:import href="http://docbook.sourceforge.net/release/xsl/current/html/docbook.xsl"/>
+<xsl:include href="http://docbook.sourceforge.net/release/xsl/current/manpages/synop.xsl"/>
+<xsl:include href="http://docbook.sourceforge.net/release/xsl/current/manpages/lists.xsl"/>
+<xsl:include href="http://docbook.sourceforge.net/release/xsl/current/manpages/xref.xsl"/>
+
+<!-- Needed for chunker.xsl (for now): -->
+<xsl:param name="chunker.output.method" select="'text'"/>
+<xsl:param name="chunker.output.encoding" select="'ISO-8859-1'"/>
+
+<xsl:output method="text"
+ encoding="ISO-8859-1"
+ indent="no"/>
+
+<!--
+ named templates for bold and italic. call like:
+
+ <xsl:apply-templates mode="bold" select="node-you-want" />
+-->
+<xsl:template mode="bold" match="*">
+ <xsl:variable name="content">
+ <xsl:apply-templates/>
+ </xsl:variable>
+ <xsl:text>\fB</xsl:text>
+ <xsl:value-of select="$content"/>
+ <xsl:text>\fR</xsl:text>
+</xsl:template>
+
+<xsl:template mode="italic" match="*">
+ <xsl:variable name="content">
+ <xsl:apply-templates/>
+ </xsl:variable>
+ <xsl:text>\fI</xsl:text>
+ <xsl:value-of select="$content"/>
+ <xsl:text>\fR</xsl:text>
+</xsl:template>
+
+<xsl:template match="caution|important|note|tip|warning">
+ <xsl:text> .RS .Sh "</xsl:text>
+ <!-- capitalize word -->
+ <xsl:value-of
+ select="translate (substring (name(.), 1, 1), 'cintw', 'CINTW')" />
+ <xsl:value-of select="substring (name(), 2)" />
+ <xsl:if test="title">
+ <xsl:text>: </xsl:text>
+ <xsl:value-of select="title[1]"/>
+ </xsl:if>
+ <xsl:text>" </xsl:text>
+ <xsl:apply-templates/>
+ <xsl:text> .RE </xsl:text>
+</xsl:template>
+
+<xsl:template match="refsection|refsect1">
+ <xsl:choose>
+ <xsl:when test="ancestor::refsection">
+ <xsl:text> .SS "</xsl:text>
+ <xsl:value-of select="title[1]"/>
+ </xsl:when>
+ <xsl:otherwise>
+ <xsl:text> .SH "</xsl:text>
+ <xsl:value-of select="translate(title[1],'abcdefghijklmnopqrstuvwxyz', 'ABCDEFGHIJKLMNOPQRSTUVWXYZ')"/>
+ </xsl:otherwise>
+ </xsl:choose>
+ <xsl:text>" </xsl:text>
+ <xsl:apply-templates/>
+</xsl:template>
+
+<xsl:template match="refsect2">
+ <xsl:text> .SS "</xsl:text>
+ <xsl:value-of select="title[1]"/>
+ <xsl:text>" </xsl:text>
+ <xsl:apply-templates/>
+</xsl:template>
+
+<xsl:template match="refsynopsisdiv">
+ <xsl:text> .SH "SYNOPSIS" </xsl:text>
+ <xsl:apply-templates/>
+</xsl:template>
+
+
+<xsl:template match="para">
+ <xsl:text> .PP </xsl:text>
+ <xsl:for-each select="node()">
+ <xsl:choose>
+ <xsl:when test="self::literallayout|self::informaltable|self::screen|
+ self::programlisting|self::itemizedlist|
+ self::orderedlist|self::variablelist|self::simplelist">
+ <xsl:text> </xsl:text>
+ <xsl:apply-templates select="."/>
+ </xsl:when>
+ <xsl:when test="self::text()">
+ <xsl:if test="starts-with(translate(.,' ',' '), ' ') and
+ preceding-sibling::node()[name(.)!='']">
+ <xsl:text> </xsl:text>
+ </xsl:if>
+ <xsl:variable name="content">
+ <xsl:apply-templates select="."/>
+ </xsl:variable>
+ <xsl:value-of select="normalize-space($content)"/>
+ <xsl:if
+ test="translate(substring(., string-length(.), 1),' ',' ') = ' ' and
+ following-sibling::node()[name(.)!='']">
+ <xsl:text> </xsl:text>
+ </xsl:if>
+ </xsl:when>
+ <xsl:otherwise>
+ <xsl:variable name="content">
+ <xsl:apply-templates select="."/>
+ </xsl:variable>
+ <xsl:value-of select="normalize-space($content)"/>
+ </xsl:otherwise>
+ </xsl:choose>
+ </xsl:for-each>
+ <xsl:text> </xsl:text>
+</xsl:template>
+
+<xsl:template match="simpara">
+ <xsl:variable name="content">
+ <xsl:apply-templates/>
+ </xsl:variable>
+ <xsl:text> </xsl:text>
+ <xsl:value-of select="normalize-space($content)"/>
+ <xsl:text>
+</xsl:text>
+</xsl:template>
+
+
+<xsl:template match="refentry">
+
+ <xsl:variable name="section">
+ <xsl:choose>
+ <xsl:when test="refmeta/manvolnum">
+ <xsl:value-of select="refmeta/manvolnum[1]"/>
+ </xsl:when>
+ <xsl:when test=".//funcsynopsis">3</xsl:when>
+ <xsl:otherwise>1</xsl:otherwise>
+ </xsl:choose>
+ </xsl:variable>
+
+ <xsl:variable name="name" select="refnamediv/refname[1]"/>
+
+ <!-- standard man page width is 64 chars; 6 chars needed for the two
+ (x) volume numbers, and 2 spaces, leaves 56 -->
+ <xsl:variable name="twidth" select="(56 - string-length(refmeta/refentrytitle)) div 2"/>
+
+ <xsl:variable name="reftitle"
+ select="substring(refmeta/refentrytitle, 1, $twidth)"/>
+
+ <xsl:variable name="title">
+ <xsl:choose>
+ <xsl:when test="refmeta/refentryinfo/title">
+ <xsl:value-of select="refmeta/refentryinfo/title"/>
+ </xsl:when>
+ <xsl:when test="../referenceinfo/title">
+ <xsl:value-of select="../referenceinfo/title"/>
+ </xsl:when>
+ </xsl:choose>
+ </xsl:variable>
+
+<!-- replace spaces with underscores in the filename -->
+ <xsl:variable name="filename">
+ <xsl:call-template name="replace-string">
+ <xsl:with-param name="content"
+ select="concat(normalize-space ($name), '.', $section)"/>
+ <xsl:with-param name="replace" select="' '"/>
+ <xsl:with-param name="with" select="'_'"/>
+ </xsl:call-template>
+ </xsl:variable>
+
+ <xsl:call-template name="write.text.chunk">
+ <xsl:with-param name="filename" select="$filename"/>
+ <xsl:with-param name="content">
+ <xsl:text>.\"Generated by db2man.xsl. Don't modify this, modify the source.
+.de Sh \" Subsection
+.br
+.if t .Sp
+.ne 5
+.PP
+\fB\\$1\fR
+.PP
+..
+.de Sp \" Vertical space (when we can't use .PP)
+.if t .sp .5v
+.if n .sp
+..
+.de Ip \" List item
+.br
+.ie \\n(.$>=3 .ne \\$3
+.el .ne 3
+.IP "\\$1" \\$2
+..
+.TH "</xsl:text>
+ <xsl:value-of select="$reftitle"/>
+ <xsl:text>" </xsl:text>
+ <xsl:value-of select="$section"/>
+ <xsl:text> "Copyright 2004-2005 Neil Williams" "0.1.0" "CASHUTIL" </xsl:text>
+ <xsl:apply-templates/>
+ <xsl:text> </xsl:text>
+
+ <!-- Author section -->
+ <xsl:choose>
+ <xsl:when test="refentryinfo//author">
+ <xsl:apply-templates select="refentryinfo" mode="authorsect"/>
+ </xsl:when>
+ <xsl:when test="/book/bookinfo//author">
+ <xsl:apply-templates select="/book/bookinfo" mode="authorsect"/>
+ </xsl:when>
+ <xsl:when test="/article/articleinfo//author">
+ <xsl:apply-templates select="/article/articleinfo" mode="authorsect"/>
+ </xsl:when>
+ </xsl:choose>
+
+ </xsl:with-param>
+ </xsl:call-template>
+ <!-- Now generate stub include pages for every page documented in
+ this refentry (except the page itself) -->
+ <xsl:for-each select="refnamediv/refname">
+ <xsl:if test=". != $name">
+ <xsl:call-template name="write.text.chunk">
+ <xsl:with-param name="filename"
+ select="concat(normalize-space(.), '.', $section)"/>
+ <xsl:with-param name="content" select="concat('.so man',
+ $section, '/', $name, '.', $section, ' ')"/>
+ </xsl:call-template>
+ </xsl:if>
+ </xsl:for-each>
+</xsl:template>
+
+<xsl:template match="refmeta"></xsl:template>
+<xsl:template match="title"></xsl:template>
+<xsl:template match="abstract"></xsl:template>
+
+<xsl:template match="articleinfo|bookinfo|refentryinfo" mode="authorsect">
+ <xsl:text>.SH AUTHOR</xsl:text>
+ <xsl:if test="count(.//author)>1">
+ <xsl:text>S</xsl:text>
+ </xsl:if>
+ <xsl:text> </xsl:text>
+
+ <xsl:for-each select=".//author">
+ <xsl:if test="position() > 1">
+ <xsl:text>, </xsl:text>
+ </xsl:if>
+ <xsl:variable name="author">
+ <xsl:apply-templates select="."/>
+ </xsl:variable>
+ <xsl:value-of select="normalize-space($author)"/>
+ </xsl:for-each>
+ <xsl:text>. </xsl:text>
+ <xsl:if test=".//editor">
+ <xsl:text>.br Man page edited by </xsl:text>
+ <xsl:apply-templates select=".//editor"/>
+ <xsl:text>. </xsl:text>
+ </xsl:if>
+</xsl:template>
+
+<xsl:template match="author|editor">
+ <xsl:call-template name="person.name"/>
+ <xsl:apply-templates select="./affiliation/address/email" />
+</xsl:template>
+
+<xsl:template match="copyright">
+ <xsl:text>Copyright \(co </xsl:text>
+ <xsl:apply-templates select="./year" />
+ <xsl:text> .Sp </xsl:text>
+</xsl:template>
+
+<xsl:template match="email">
+ <xsl:text> <</xsl:text>
+ <xsl:apply-templates/>
+ <xsl:text>></xsl:text>
+</xsl:template>
+
+<xsl:template match="refnamediv">
+ <xsl:text>.SH NAME </xsl:text>
+ <xsl:for-each select="refname">
+ <xsl:if test="position()>1">
+ <xsl:text>, </xsl:text>
+ </xsl:if>
+ <xsl:value-of select="."/>
+ </xsl:for-each>
+ <xsl:text> \- </xsl:text>
+ <xsl:value-of select="normalize-space (refpurpose)"/>
+</xsl:template>
+
+<xsl:template match="refentry/refentryinfo"></xsl:template>
+
+<xsl:template match="informalexample|screen">
+ <xsl:text> .IP </xsl:text>
+ <xsl:apply-templates/>
+</xsl:template>
+
+<xsl:template match="filename|replaceable|varname">
+ <xsl:text>\fI</xsl:text><xsl:apply-templates/><xsl:text>\fR</xsl:text>
+</xsl:template>
+
+<xsl:template match="option|userinput|envar|errorcode|constant|type">
+ <xsl:text>\fB</xsl:text><xsl:apply-templates/><xsl:text>\fR</xsl:text>
+</xsl:template>
+
+<xsl:template match="emphasis">
+ <xsl:choose>
+ <xsl:when test="@role = 'bold' and $emphasis.propagates.style != 0">
+ <xsl:text>\fB</xsl:text><xsl:apply-templates/><xsl:text>\fR</xsl:text>
+ </xsl:when>
+ <xsl:otherwise>
+ <xsl:text>\fI</xsl:text><xsl:apply-templates/><xsl:text>\fR</xsl:text>
+ </xsl:otherwise>
+ </xsl:choose>
+</xsl:template>
+
+<xsl:template match="quote">
+ <xsl:text>``</xsl:text>
+ <xsl:apply-templates/>
+ <xsl:text>''</xsl:text>
+</xsl:template>
+
+<xsl:template match="programlisting|literallayout">
+ <xsl:text> .nf </xsl:text>
+ <xsl:apply-templates/>
+ <xsl:text> .fi </xsl:text>
+</xsl:template>
+
+<xsl:template match="optional">
+ <xsl:value-of select="$arg.choice.opt.open.str"/>
+ <xsl:apply-templates/>
+ <xsl:value-of select="$arg.choice.opt.close.str"/>
+</xsl:template>
+
+<xsl:template name="do-citerefentry">
+ <xsl:param name="refentrytitle" select="''"/>
+ <xsl:param name="manvolnum" select="''"/>
+
+ <xsl:apply-templates mode="bold" select="$refentrytitle"/>
+ <xsl:text>(</xsl:text>
+ <xsl:value-of select="$manvolnum"/>
+ <xsl:text>)</xsl:text>
+</xsl:template>
+
+<xsl:template match="citerefentry">
+ <xsl:call-template name="do-citerefentry">
+ <xsl:with-param name="refentrytitle" select="refentrytitle"/>
+ <xsl:with-param name="manvolnum" select="manvolnum"/>
+ </xsl:call-template>
+</xsl:template>
+
+<xsl:template match="ulink">
+ <xsl:variable name="content">
+ <xsl:apply-templates/>
+ </xsl:variable>
+ <xsl:variable name="url" select="@url"/>
+ <xsl:choose>
+ <xsl:when test="$url=$content or $content=''">
+ <xsl:text>\fI</xsl:text>
+ <xsl:value-of select="$url"/>
+ <xsl:text>\fR</xsl:text>
+ </xsl:when>
+ <xsl:otherwise>
+ <xsl:value-of select="$content"/>
+ <xsl:text>: \fI</xsl:text>
+ <xsl:value-of select="$url"/>
+ <xsl:text>\fR</xsl:text>
+ </xsl:otherwise>
+ </xsl:choose>
+</xsl:template>
+
+<!-- Translate some entities to textual equivalents. -->
+<xsl:template name="replace-string">
+ <xsl:param name="content" select="''"/>
+ <xsl:param name="replace" select="''"/>
+ <xsl:param name="with" select="''"/>
+ <xsl:choose>
+ <xsl:when test="not(contains($content,$replace))">
+ <xsl:value-of select="$content"/>
+ </xsl:when>
+ <xsl:otherwise>
+ <xsl:value-of select="substring-before($content,$replace)"/>
+ <xsl:value-of select="$with"/>
+ <xsl:call-template name="replace-string">
+ <xsl:with-param name="content"
+ select="substring-after($content,$replace)"/>
+ <xsl:with-param name="replace" select="$replace"/>
+ <xsl:with-param name="with" select="$with"/>
+ </xsl:call-template>
+ </xsl:otherwise>
+ </xsl:choose>
+</xsl:template>
+
+<xsl:template name="replace-dash">
+ <xsl:param name="content" select="''"/>
+ <xsl:call-template name="replace-string">
+ <xsl:with-param name="content" select="$content"/>
+ <xsl:with-param name="replace" select="'-'"/>
+ <xsl:with-param name="with" select="'\-'"/>
+ </xsl:call-template>
+</xsl:template>
+
+<xsl:template name="replace-ndash">
+ <xsl:param name="content" select="''"/>
+ <xsl:call-template name="replace-string">
+ <xsl:with-param name="content" select="$content"/>
+ <xsl:with-param name="replace" select="'–'"/>
+ <xsl:with-param name="with" select="'-'"/>
+ </xsl:call-template>
+</xsl:template>
+
+<xsl:template name="replace-mdash">
+ <xsl:param name="content" select="''"/>
+ <xsl:call-template name="replace-string">
+ <xsl:with-param name="content" select="$content"/>
+ <xsl:with-param name="replace" select="'—'"/>
+ <xsl:with-param name="with" select="'--'"/>
+ </xsl:call-template>
+</xsl:template>
+
+<xsl:template name="replace-hellip">
+ <xsl:param name="content" select="''"/>
+ <xsl:call-template name="replace-string">
+ <xsl:with-param name="content" select="$content"/>
+ <xsl:with-param name="replace" select="'…'"/>
+ <xsl:with-param name="with" select="'...'"/>
+ </xsl:call-template>
+</xsl:template>
+
+<xsl:template name="replace-setmn">
+ <xsl:param name="content" select="''"/>
+ <xsl:call-template name="replace-string">
+ <xsl:with-param name="content" select="$content"/>
+ <xsl:with-param name="replace" select="'∖'"/>
+ <xsl:with-param name="with" select="'\\'"/>
+ </xsl:call-template>
+</xsl:template>
+
+<xsl:template name="replace-minus">
+ <xsl:param name="content" select="''"/>
+ <xsl:value-of select="translate($content,'−','-')"/>
+</xsl:template>
+
+<xsl:template name="replace-nbsp">
+ <xsl:param name="content" select="''"/>
+ <xsl:call-template name="replace-string">
+ <xsl:with-param name="content" select="$content"/>
+ <xsl:with-param name="replace" select="' '"/>
+ <xsl:with-param name="with" select="'\~'"/>
+ </xsl:call-template>
+</xsl:template>
+
+<xsl:template name="replace-backslash">
+ <xsl:param name="content" select="''"/>
+ <xsl:call-template name="replace-string">
+ <xsl:with-param name="content" select="$content"/>
+ <xsl:with-param name="replace" select="'\'"/>
+ <xsl:with-param name="with" select="'\\'"/>
+ </xsl:call-template>
+</xsl:template>
+
+<!-- if a period character is output at the beginning of a line
+ it will be interpreted as a groff macro, so prefix all periods
+ with "\&", a zero-width space. -->
+<xsl:template name="replace-period">
+ <xsl:param name="content" select="''"/>
+ <xsl:call-template name="replace-string">
+ <xsl:with-param name="content" select="$content"/>
+ <xsl:with-param name="replace" select="'.'"/>
+ <xsl:with-param name="with" select="'\&.'"/>
+ </xsl:call-template>
+</xsl:template>
+
+<xsl:template name="replace-entities">
+ <xsl:param name="content" select="''"/>
+ <xsl:call-template name="replace-hellip">
+ <xsl:with-param name="content">
+ <xsl:call-template name="replace-minus">
+ <xsl:with-param name="content">
+ <xsl:call-template name="replace-mdash">
+ <xsl:with-param name="content">
+ <xsl:call-template name="replace-ndash">
+ <xsl:with-param name="content">
+ <xsl:call-template name="replace-dash">
+ <xsl:with-param name="content">
+ <xsl:call-template name="replace-setmn">
+ <xsl:with-param name="content">
+ <xsl:call-template name="replace-period">
+ <xsl:with-param name="content">
+ <xsl:call-template name="replace-nbsp">
+ <xsl:with-param name="content">
+ <xsl:call-template name="replace-backslash">
+ <xsl:with-param name="content" select="$content"/>
+ </xsl:call-template>
+ </xsl:with-param>
+ </xsl:call-template>
+ </xsl:with-param>
+ </xsl:call-template>
+ </xsl:with-param>
+ </xsl:call-template>
+ </xsl:with-param>
+ </xsl:call-template>
+ </xsl:with-param>
+ </xsl:call-template>
+ </xsl:with-param>
+ </xsl:call-template>
+ </xsl:with-param>
+ </xsl:call-template>
+ </xsl:with-param>
+ </xsl:call-template>
+</xsl:template>
+
+<xsl:template match="dingbat.characters">
+ <!-- now that I'm using the real serializer, all that dingbat malarky -->
+ <!-- isn't necessary anymore... -->
+ <xsl:param name="dingbat">bullet</xsl:param>
+ <xsl:choose>
+ <xsl:when test="$dingbat='bullet'">\(bu</xsl:when>
+ <xsl:when test="$dingbat='copyright'">\(co</xsl:when>
+ <xsl:when test="$dingbat='trademark'">\(tm</xsl:when>
+ <xsl:when test="$dingbat='trade'">\(tm</xsl:when>
+ <xsl:when test="$dingbat='registered'">\(rg</xsl:when>
+ <xsl:when test="$dingbat='service'">(SM)</xsl:when>
+ <xsl:when test="$dingbat='nbsp'">\~</xsl:when>
+ <xsl:when test="$dingbat='ldquo'">\(lq</xsl:when>
+ <xsl:when test="$dingbat='rdquo'">\(rq</xsl:when>
+ <xsl:when test="$dingbat='lsquo'">`</xsl:when>
+ <xsl:when test="$dingbat='rsquo'">'</xsl:when>
+ <xsl:when test="$dingbat='em-dash'">\(em</xsl:when>
+ <xsl:when test="$dingbat='mdash'">\(em</xsl:when>
+ <xsl:when test="$dingbat='en-dash'">\(en</xsl:when>
+ <xsl:when test="$dingbat='ndash'">\(en</xsl:when>
+ <xsl:otherwise>
+ <xsl:text>\(bu</xsl:text>
+ </xsl:otherwise>
+ </xsl:choose>
+</xsl:template>
+
+<xsl:template match="text()">
+ <xsl:call-template name="replace-entities">
+ <xsl:with-param name="content">
+ <xsl:value-of select="."/>
+ </xsl:with-param>
+ </xsl:call-template>
+</xsl:template>
+
+<xsl:template match="/">
+ <xsl:choose>
+ <xsl:when test="//refentry">
+ <xsl:apply-templates select="//refentry"/>
+ </xsl:when>
+ <xsl:otherwise>
+ <xsl:message>No refentry elements!</xsl:message>
+ </xsl:otherwise>
+ </xsl:choose>
+</xsl:template>
+
+</xsl:stylesheet>
Added: gnucash/branches/cashutil/cashutil/doc/xml/docbook.xsl.in
===================================================================
--- gnucash/branches/cashutil/cashutil/doc/xml/docbook.xsl.in 2005-11-03 11:03:19 UTC (rev 11802)
+++ gnucash/branches/cashutil/cashutil/doc/xml/docbook.xsl.in 2005-11-03 11:07:13 UTC (rev 11803)
@@ -0,0 +1,557 @@
+<?xml version='1.0'?>
+<!-- vim:set sts=2 shiftwidth=2 syntax=sgml: -->
+<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
+ version='1.0'>
+
+<xsl:import href="http://docbook.sourceforge.net/release/xsl/current/html/docbook.xsl"/>
+<xsl:include href="http://docbook.sourceforge.net/release/xsl/current/manpages/synop.xsl"/>
+<xsl:include href="http://docbook.sourceforge.net/release/xsl/current/manpages/lists.xsl"/>
+<xsl:include href="http://docbook.sourceforge.net/release/xsl/current/manpages/xref.xsl"/>
+
+<!-- Needed for chunker.xsl (for now): -->
+<xsl:param name="chunker.output.method" select="'text'"/>
+<xsl:param name="chunker.output.encoding" select="'ISO-8859-1'"/>
+
+<xsl:output method="text"
+ encoding="ISO-8859-1"
+ indent="no"/>
+
+<!--
+ named templates for bold and italic. call like:
+
+ <xsl:apply-templates mode="bold" select="node-you-want" />
+-->
+<xsl:template mode="bold" match="*">
+ <xsl:variable name="content">
+ <xsl:apply-templates/>
+ </xsl:variable>
+ <xsl:text>\fB</xsl:text>
+ <xsl:value-of select="$content"/>
+ <xsl:text>\fR</xsl:text>
+</xsl:template>
+
+<xsl:template mode="italic" match="*">
+ <xsl:variable name="content">
+ <xsl:apply-templates/>
+ </xsl:variable>
+ <xsl:text>\fI</xsl:text>
+ <xsl:value-of select="$content"/>
+ <xsl:text>\fR</xsl:text>
+</xsl:template>
+
+<xsl:template match="caution|important|note|tip|warning">
+ <xsl:text> .RS .Sh "</xsl:text>
+ <!-- capitalize word -->
+ <xsl:value-of
+ select="translate (substring (name(.), 1, 1), 'cintw', 'CINTW')" />
+ <xsl:value-of select="substring (name(), 2)" />
+ <xsl:if test="title">
+ <xsl:text>: </xsl:text>
+ <xsl:value-of select="title[1]"/>
+ </xsl:if>
+ <xsl:text>" </xsl:text>
+ <xsl:apply-templates/>
+ <xsl:text> .RE </xsl:text>
+</xsl:template>
+
+<xsl:template match="refsection|refsect1">
+ <xsl:choose>
+ <xsl:when test="ancestor::refsection">
+ <xsl:text> .SS "</xsl:text>
+ <xsl:value-of select="title[1]"/>
+ </xsl:when>
+ <xsl:otherwise>
+ <xsl:text> .SH "</xsl:text>
+ <xsl:value-of select="translate(title[1],'abcdefghijklmnopqrstuvwxyz', 'ABCDEFGHIJKLMNOPQRSTUVWXYZ')"/>
+ </xsl:otherwise>
+ </xsl:choose>
+ <xsl:text>" </xsl:text>
+ <xsl:apply-templates/>
+</xsl:template>
+
+<xsl:template match="refsect2">
+ <xsl:text> .SS "</xsl:text>
+ <xsl:value-of select="title[1]"/>
+ <xsl:text>" </xsl:text>
+ <xsl:apply-templates/>
+</xsl:template>
+
+<xsl:template match="refsynopsisdiv">
+ <xsl:text> .SH "SYNOPSIS" </xsl:text>
+ <xsl:apply-templates/>
+</xsl:template>
+
+
+<xsl:template match="para">
+ <xsl:text> .PP </xsl:text>
+ <xsl:for-each select="node()">
+ <xsl:choose>
+ <xsl:when test="self::literallayout|self::informaltable|self::screen|
+ self::programlisting|self::itemizedlist|
+ self::orderedlist|self::variablelist|self::simplelist">
+ <xsl:text> </xsl:text>
+ <xsl:apply-templates select="."/>
+ </xsl:when>
+ <xsl:when test="self::text()">
+ <xsl:if test="starts-with(translate(.,' ',' '), ' ') and
+ preceding-sibling::node()[name(.)!='']">
+ <xsl:text> </xsl:text>
+ </xsl:if>
+ <xsl:variable name="content">
+ <xsl:apply-templates select="."/>
+ </xsl:variable>
+ <xsl:value-of select="normalize-space($content)"/>
+ <xsl:if
+ test="translate(substring(., string-length(.), 1),' ',' ') = ' ' and
+ following-sibling::node()[name(.)!='']">
+ <xsl:text> </xsl:text>
+ </xsl:if>
+ </xsl:when>
+ <xsl:otherwise>
+ <xsl:variable name="content">
+ <xsl:apply-templates select="."/>
+ </xsl:variable>
+ <xsl:value-of select="normalize-space($content)"/>
+ </xsl:otherwise>
+ </xsl:choose>
+ </xsl:for-each>
+ <xsl:text> </xsl:text>
+</xsl:template>
+
+<xsl:template match="simpara">
+ <xsl:variable name="content">
+ <xsl:apply-templates/>
+ </xsl:variable>
+ <xsl:text> </xsl:text>
+ <xsl:value-of select="normalize-space($content)"/>
+ <xsl:text>
+</xsl:text>
+</xsl:template>
+
+
+<xsl:template match="refentry">
+
+ <xsl:variable name="section">
+ <xsl:choose>
+ <xsl:when test="refmeta/manvolnum">
+ <xsl:value-of select="refmeta/manvolnum[1]"/>
+ </xsl:when>
+ <xsl:when test=".//funcsynopsis">3</xsl:when>
+ <xsl:otherwise>1</xsl:otherwise>
+ </xsl:choose>
+ </xsl:variable>
+
+ <xsl:variable name="name" select="refnamediv/refname[1]"/>
+
+ <!-- standard man page width is 64 chars; 6 chars needed for the two
+ (x) volume numbers, and 2 spaces, leaves 56 -->
+ <xsl:variable name="twidth" select="(56 - string-length(refmeta/refentrytitle)) div 2"/>
+
+ <xsl:variable name="reftitle"
+ select="substring(refmeta/refentrytitle, 1, $twidth)"/>
+
+ <xsl:variable name="title">
+ <xsl:choose>
+ <xsl:when test="refmeta/refentryinfo/title">
+ <xsl:value-of select="refmeta/refentryinfo/title"/>
+ </xsl:when>
+ <xsl:when test="../referenceinfo/title">
+ <xsl:value-of select="../referenceinfo/title"/>
+ </xsl:when>
+ </xsl:choose>
+ </xsl:variable>
+
+<!-- replace spaces with underscores in the filename -->
+ <xsl:variable name="filename">
+ <xsl:call-template name="replace-string">
+ <xsl:with-param name="content"
+ select="concat(normalize-space ($name), '.', $section)"/>
+ <xsl:with-param name="replace" select="' '"/>
+ <xsl:with-param name="with" select="'_'"/>
+ </xsl:call-template>
+ </xsl:variable>
+
+ <xsl:call-template name="write.text.chunk">
+ <xsl:with-param name="filename" select="$filename"/>
+ <xsl:with-param name="content">
+ <xsl:text>.\"Generated by db2man.xsl. Don't modify this, modify the source.
+.de Sh \" Subsection
+.br
+.if t .Sp
+.ne 5
+.PP
+\fB\\$1\fR
+.PP
+..
+.de Sp \" Vertical space (when we can't use .PP)
+.if t .sp .5v
+.if n .sp
+..
+.de Ip \" List item
+.br
+.ie \\n(.$>=3 .ne \\$3
+.el .ne 3
+.IP "\\$1" \\$2
+..
+.TH "</xsl:text>
+ <xsl:value-of select="$reftitle"/>
+ <xsl:text>" </xsl:text>
+ <xsl:value-of select="$section"/>
+ <xsl:text> "Copyright 2004-2005 Neil Williams" "@VERSION@" "CASHUTIL" </xsl:text>
+ <xsl:apply-templates/>
+ <xsl:text> </xsl:text>
+
+ <!-- Author section -->
+ <xsl:choose>
+ <xsl:when test="refentryinfo//author">
+ <xsl:apply-templates select="refentryinfo" mode="authorsect"/>
+ </xsl:when>
+ <xsl:when test="/book/bookinfo//author">
+ <xsl:apply-templates select="/book/bookinfo" mode="authorsect"/>
+ </xsl:when>
+ <xsl:when test="/article/articleinfo//author">
+ <xsl:apply-templates select="/article/articleinfo" mode="authorsect"/>
+ </xsl:when>
+ </xsl:choose>
+
+ </xsl:with-param>
+ </xsl:call-template>
+ <!-- Now generate stub include pages for every page documented in
+ this refentry (except the page itself) -->
+ <xsl:for-each select="refnamediv/refname">
+ <xsl:if test=". != $name">
+ <xsl:call-template name="write.text.chunk">
+ <xsl:with-param name="filename"
+ select="concat(normalize-space(.), '.', $section)"/>
+ <xsl:with-param name="content" select="concat('.so man',
+ $section, '/', $name, '.', $section, ' ')"/>
+ </xsl:call-template>
+ </xsl:if>
+ </xsl:for-each>
+</xsl:template>
+
+<xsl:template match="refmeta"></xsl:template>
+<xsl:template match="title"></xsl:template>
+<xsl:template match="abstract"></xsl:template>
+
+<xsl:template match="articleinfo|bookinfo|refentryinfo" mode="authorsect">
+ <xsl:text>.SH AUTHOR</xsl:text>
+ <xsl:if test="count(.//author)>1">
+ <xsl:text>S</xsl:text>
+ </xsl:if>
+ <xsl:text> </xsl:text>
+
+ <xsl:for-each select=".//author">
+ <xsl:if test="position() > 1">
+ <xsl:text>, </xsl:text>
+ </xsl:if>
+ <xsl:variable name="author">
+ <xsl:apply-templates select="."/>
+ </xsl:variable>
+ <xsl:value-of select="normalize-space($author)"/>
+ </xsl:for-each>
+ <xsl:text>. </xsl:text>
+ <xsl:if test=".//editor">
+ <xsl:text>.br Man page edited by </xsl:text>
+ <xsl:apply-templates select=".//editor"/>
+ <xsl:text>. </xsl:text>
+ </xsl:if>
+</xsl:template>
+
+<xsl:template match="author|editor">
+ <xsl:call-template name="person.name"/>
+ <xsl:apply-templates select="./affiliation/address/email" />
+</xsl:template>
+
+<xsl:template match="copyright">
+ <xsl:text>Copyright \(co </xsl:text>
+ <xsl:apply-templates select="./year" />
+ <xsl:text> .Sp </xsl:text>
+</xsl:template>
+
+<xsl:template match="email">
+ <xsl:text> <</xsl:text>
+ <xsl:apply-templates/>
+ <xsl:text>></xsl:text>
+</xsl:template>
+
+<xsl:template match="refnamediv">
+ <xsl:text>.SH NAME </xsl:text>
+ <xsl:for-each select="refname">
+ <xsl:if test="position()>1">
+ <xsl:text>, </xsl:text>
+ </xsl:if>
+ <xsl:value-of select="."/>
+ </xsl:for-each>
+ <xsl:text> \- </xsl:text>
+ <xsl:value-of select="normalize-space (refpurpose)"/>
+</xsl:template>
+
+<xsl:template match="refentry/refentryinfo"></xsl:template>
+
+<xsl:template match="informalexample|screen">
+ <xsl:text> .IP </xsl:text>
+ <xsl:apply-templates/>
+</xsl:template>
+
+<xsl:template match="filename|replaceable|varname">
+ <xsl:text>\fI</xsl:text><xsl:apply-templates/><xsl:text>\fR</xsl:text>
+</xsl:template>
+
+<xsl:template match="option|userinput|envar|errorcode|constant|type">
+ <xsl:text>\fB</xsl:text><xsl:apply-templates/><xsl:text>\fR</xsl:text>
+</xsl:template>
+
+<xsl:template match="emphasis">
+ <xsl:choose>
+ <xsl:when test="@role = 'bold' and $emphasis.propagates.style != 0">
+ <xsl:text>\fB</xsl:text><xsl:apply-templates/><xsl:text>\fR</xsl:text>
+ </xsl:when>
+ <xsl:otherwise>
+ <xsl:text>\fI</xsl:text><xsl:apply-templates/><xsl:text>\fR</xsl:text>
+ </xsl:otherwise>
+ </xsl:choose>
+</xsl:template>
+
+<xsl:template match="quote">
+ <xsl:text>``</xsl:text>
+ <xsl:apply-templates/>
+ <xsl:text>''</xsl:text>
+</xsl:template>
+
+<xsl:template match="programlisting|literallayout">
+ <xsl:text> .nf </xsl:text>
+ <xsl:apply-templates/>
+ <xsl:text> .fi </xsl:text>
+</xsl:template>
+
+<xsl:template match="optional">
+ <xsl:value-of select="$arg.choice.opt.open.str"/>
+ <xsl:apply-templates/>
+ <xsl:value-of select="$arg.choice.opt.close.str"/>
+</xsl:template>
+
+<xsl:template name="do-citerefentry">
+ <xsl:param name="refentrytitle" select="''"/>
+ <xsl:param name="manvolnum" select="''"/>
+
+ <xsl:apply-templates mode="bold" select="$refentrytitle"/>
+ <xsl:text>(</xsl:text>
+ <xsl:value-of select="$manvolnum"/>
+ <xsl:text>)</xsl:text>
+</xsl:template>
+
+<xsl:template match="citerefentry">
+ <xsl:call-template name="do-citerefentry">
+ <xsl:with-param name="refentrytitle" select="refentrytitle"/>
+ <xsl:with-param name="manvolnum" select="manvolnum"/>
+ </xsl:call-template>
+</xsl:template>
+
+<xsl:template match="ulink">
+ <xsl:variable name="content">
+ <xsl:apply-templates/>
+ </xsl:variable>
+ <xsl:variable name="url" select="@url"/>
+ <xsl:choose>
+ <xsl:when test="$url=$content or $content=''">
+ <xsl:text>\fI</xsl:text>
+ <xsl:value-of select="$url"/>
+ <xsl:text>\fR</xsl:text>
+ </xsl:when>
+ <xsl:otherwise>
+ <xsl:value-of select="$content"/>
+ <xsl:text>: \fI</xsl:text>
+ <xsl:value-of select="$url"/>
+ <xsl:text>\fR</xsl:text>
+ </xsl:otherwise>
+ </xsl:choose>
+</xsl:template>
+
+<!-- Translate some entities to textual equivalents. -->
+<xsl:template name="replace-string">
+ <xsl:param name="content" select="''"/>
+ <xsl:param name="replace" select="''"/>
+ <xsl:param name="with" select="''"/>
+ <xsl:choose>
+ <xsl:when test="not(contains($content,$replace))">
+ <xsl:value-of select="$content"/>
+ </xsl:when>
+ <xsl:otherwise>
+ <xsl:value-of select="substring-before($content,$replace)"/>
+ <xsl:value-of select="$with"/>
+ <xsl:call-template name="replace-string">
+ <xsl:with-param name="content"
+ select="substring-after($content,$replace)"/>
+ <xsl:with-param name="replace" select="$replace"/>
+ <xsl:with-param name="with" select="$with"/>
+ </xsl:call-template>
+ </xsl:otherwise>
+ </xsl:choose>
+</xsl:template>
+
+<xsl:template name="replace-dash">
+ <xsl:param name="content" select="''"/>
+ <xsl:call-template name="replace-string">
+ <xsl:with-param name="content" select="$content"/>
+ <xsl:with-param name="replace" select="'-'"/>
+ <xsl:with-param name="with" select="'\-'"/>
+ </xsl:call-template>
+</xsl:template>
+
+<xsl:template name="replace-ndash">
+ <xsl:param name="content" select="''"/>
+ <xsl:call-template name="replace-string">
+ <xsl:with-param name="content" select="$content"/>
+ <xsl:with-param name="replace" select="'–'"/>
+ <xsl:with-param name="with" select="'-'"/>
+ </xsl:call-template>
+</xsl:template>
+
+<xsl:template name="replace-mdash">
+ <xsl:param name="content" select="''"/>
+ <xsl:call-template name="replace-string">
+ <xsl:with-param name="content" select="$content"/>
+ <xsl:with-param name="replace" select="'—'"/>
+ <xsl:with-param name="with" select="'--'"/>
+ </xsl:call-template>
+</xsl:template>
+
+<xsl:template name="replace-hellip">
+ <xsl:param name="content" select="''"/>
+ <xsl:call-template name="replace-string">
+ <xsl:with-param name="content" select="$content"/>
+ <xsl:with-param name="replace" select="'…'"/>
+ <xsl:with-param name="with" select="'...'"/>
+ </xsl:call-template>
+</xsl:template>
+
+<xsl:template name="replace-setmn">
+ <xsl:param name="content" select="''"/>
+ <xsl:call-template name="replace-string">
+ <xsl:with-param name="content" select="$content"/>
+ <xsl:with-param name="replace" select="'∖'"/>
+ <xsl:with-param name="with" select="'\\'"/>
+ </xsl:call-template>
+</xsl:template>
+
+<xsl:template name="replace-minus">
+ <xsl:param name="content" select="''"/>
+ <xsl:value-of select="translate($content,'−','-')"/>
+</xsl:template>
+
+<xsl:template name="replace-nbsp">
+ <xsl:param name="content" select="''"/>
+ <xsl:call-template name="replace-string">
+ <xsl:with-param name="content" select="$content"/>
+ <xsl:with-param name="replace" select="' '"/>
+ <xsl:with-param name="with" select="'\~'"/>
+ </xsl:call-template>
+</xsl:template>
+
+<xsl:template name="replace-backslash">
+ <xsl:param name="content" select="''"/>
+ <xsl:call-template name="replace-string">
+ <xsl:with-param name="content" select="$content"/>
+ <xsl:with-param name="replace" select="'\'"/>
+ <xsl:with-param name="with" select="'\\'"/>
+ </xsl:call-template>
+</xsl:template>
+
+<!-- if a period character is output at the beginning of a line
+ it will be interpreted as a groff macro, so prefix all periods
+ with "\&", a zero-width space. -->
+<xsl:template name="replace-period">
+ <xsl:param name="content" select="''"/>
+ <xsl:call-template name="replace-string">
+ <xsl:with-param name="content" select="$content"/>
+ <xsl:with-param name="replace" select="'.'"/>
+ <xsl:with-param name="with" select="'\&.'"/>
+ </xsl:call-template>
+</xsl:template>
+
+<xsl:template name="replace-entities">
+ <xsl:param name="content" select="''"/>
+ <xsl:call-template name="replace-hellip">
+ <xsl:with-param name="content">
+ <xsl:call-template name="replace-minus">
+ <xsl:with-param name="content">
+ <xsl:call-template name="replace-mdash">
+ <xsl:with-param name="content">
+ <xsl:call-template name="replace-ndash">
+ <xsl:with-param name="content">
+ <xsl:call-template name="replace-dash">
+ <xsl:with-param name="content">
+ <xsl:call-template name="replace-setmn">
+ <xsl:with-param name="content">
+ <xsl:call-template name="replace-period">
+ <xsl:with-param name="content">
+ <xsl:call-template name="replace-nbsp">
+ <xsl:with-param name="content">
+ <xsl:call-template name="replace-backslash">
+ <xsl:with-param name="content" select="$content"/>
+ </xsl:call-template>
+ </xsl:with-param>
+ </xsl:call-template>
+ </xsl:with-param>
+ </xsl:call-template>
+ </xsl:with-param>
+ </xsl:call-template>
+ </xsl:with-param>
+ </xsl:call-template>
+ </xsl:with-param>
+ </xsl:call-template>
+ </xsl:with-param>
+ </xsl:call-template>
+ </xsl:with-param>
+ </xsl:call-template>
+ </xsl:with-param>
+ </xsl:call-template>
+</xsl:template>
+
+<xsl:template match="dingbat.characters">
+ <!-- now that I'm using the real serializer, all that dingbat malarky -->
+ <!-- isn't necessary anymore... -->
+ <xsl:param name="dingbat">bullet</xsl:param>
+ <xsl:choose>
+ <xsl:when test="$dingbat='bullet'">\(bu</xsl:when>
+ <xsl:when test="$dingbat='copyright'">\(co</xsl:when>
+ <xsl:when test="$dingbat='trademark'">\(tm</xsl:when>
+ <xsl:when test="$dingbat='trade'">\(tm</xsl:when>
+ <xsl:when test="$dingbat='registered'">\(rg</xsl:when>
+ <xsl:when test="$dingbat='service'">(SM)</xsl:when>
+ <xsl:when test="$dingbat='nbsp'">\~</xsl:when>
+ <xsl:when test="$dingbat='ldquo'">\(lq</xsl:when>
+ <xsl:when test="$dingbat='rdquo'">\(rq</xsl:when>
+ <xsl:when test="$dingbat='lsquo'">`</xsl:when>
+ <xsl:when test="$dingbat='rsquo'">'</xsl:when>
+ <xsl:when test="$dingbat='em-dash'">\(em</xsl:when>
+ <xsl:when test="$dingbat='mdash'">\(em</xsl:when>
+ <xsl:when test="$dingbat='en-dash'">\(en</xsl:when>
+ <xsl:when test="$dingbat='ndash'">\(en</xsl:when>
+ <xsl:otherwise>
+ <xsl:text>\(bu</xsl:text>
+ </xsl:otherwise>
+ </xsl:choose>
+</xsl:template>
+
+<xsl:template match="text()">
+ <xsl:call-template name="replace-entities">
+ <xsl:with-param name="content">
+ <xsl:value-of select="."/>
+ </xsl:with-param>
+ </xsl:call-template>
+</xsl:template>
+
+<xsl:template match="/">
+ <xsl:choose>
+ <xsl:when test="//refentry">
+ <xsl:apply-templates select="//refentry"/>
+ </xsl:when>
+ <xsl:otherwise>
+ <xsl:message>No refentry elements!</xsl:message>
+ </xsl:otherwise>
+ </xsl:choose>
+</xsl:template>
+
+</xsl:stylesheet>
More information about the gnucash-changes
mailing list