[gnucash-de] MacOSX Macports configure error

[scherom]

Johannes Knaus schrieb:
> Hallo zusammen,
> 
> Bin "Neunutzer" von Gnucash und habe es bis jetzt nur auf einem  
> Windowsrechner zum Laufen bekommen (da ist es aber nun auch nicht  
> wirklich schwer).
> Nun arbeite ich aber lieber auf meinem Mac (PPC G4, Tiger).
> Ich habe mich für die Macportsinstallation entschieden, da ich  
> Macports und Developertools eh schon installiert und benutzt hatte.
> Lief auch alles prima, bis es zu configure kam. Da bekomme ich nach  
> ewigem Warten (schnell ist Macports ja nicht gerade) einen "Bus  
> error" mit dem ich irgendwie gar nichts anfangen kann.
> 
> Weiss hier jemand Rat?
> 
> Danke im voraus & liebe Grüße,
> Johannes
> 
> Hier im Anschluss noch alles was bei der Installation im Terminal  
> passiert ist:
> 
> rechner:~ user$ sudo port install gnucash
> Password:
> --->  Fetching expat
> --->  Attempting to fetch expat-2.0.1.tar.gz from http:// 
> downloads.sourceforge.net/expat
> --->  Verifying checksum(s) for expat
> --->  Extracting expat
> --->  Configuring expat
> --->  Building expat with target all
> --->  Staging expat into destroot
> --->  Installing expat 2.0.1_0
> --->  Activating expat 2.0.1_0
> --->  Cleaning expat
> --->  Fetching libiconv
> --->  Attempting to fetch libiconv-1.11.tar.gz from http:// 
> ftp.gnu.org/gnu/libiconv
> --->  Verifying checksum(s) for libiconv
> --->  Extracting libiconv
> --->  Configuring libiconv
> --->  Building libiconv with target all
> --->  Staging libiconv into destroot
> --->  Installing libiconv 1.11_6+darwin_8
> --->  Activating libiconv 1.11_6+darwin_8
> --->  Cleaning libiconv
> --->  Fetching gettext
> --->  Attempting to fetch gettext-0.16.1.tar.gz from http:// 
> ftp.gnu.org/gnu/gettext
> --->  Verifying checksum(s) for gettext
> --->  Extracting gettext
> --->  Applying patches to gettext
> --->  Configuring gettext
> --->  Building gettext with target all
> --->  Staging gettext into destroot
> --->  Installing gettext 0.16.1_0
> --->  Activating gettext 0.16.1_0
> --->  Cleaning gettext
> --->  Fetching zlib
> --->  Attempting to fetch zlib-1.2.3.tar.bz2 from http://www.zlib.net/
> --->  Verifying checksum(s) for zlib
> --->  Extracting zlib
> --->  Applying patches to zlib
> --->  Configuring zlib
> --->  Building zlib with target all
> --->  Staging zlib into destroot
> --->  Installing zlib 1.2.3_1
> --->  Activating zlib 1.2.3_1
> --->  Cleaning zlib
> --->  Fetching libxml2
> --->  Attempting to fetch libxml2-2.6.30.tar.gz from http:// 
> xmlsoft.org/sources/
> --->  Verifying checksum(s) for libxml2
> --->  Extracting libxml2
> --->  Configuring libxml2
> --->  Building libxml2 with target all
> --->  Staging libxml2 into destroot
> --->  Installing libxml2 2.6.30_0
> --->  Activating libxml2 2.6.30_0
> --->  Cleaning libxml2
> --->  Fetching gwenhywfar
> --->  Attempting to fetch gwenhywfar-2.5.3.tar.gz from http:// 
> downloads.sourceforge.net/gwenhywfar
> --->  Verifying checksum(s) for gwenhywfar
> --->  Extracting gwenhywfar
> --->  Configuring gwenhywfar
> --->  Building gwenhywfar with target all
> --->  Staging gwenhywfar into destroot
> --->  Installing gwenhywfar 2.5.3_0
> --->  Activating gwenhywfar 2.5.3_0
> --->  Cleaning gwenhywfar
> --->  Fetching ktoblzcheck
> --->  Attempting to fetch ktoblzcheck-1.13.tar.gz from http:// 
> downloads.sourceforge.net/ktoblzcheck
> --->  Verifying checksum(s) for ktoblzcheck
> --->  Extracting ktoblzcheck
> --->  Configuring ktoblzcheck
> Error: Target org.macports.configure returned: configure failure:  
> shell command " cd "/opt/local/var/macports/build/ 
> _opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_k 
> toblzcheck/work/ktoblzcheck-1.13" && ./configure --prefix=/opt/local  
> --enable-python " returned error 1
> Command output: checking whether stripping libraries is possible... yes
> checking if libtool supports shared libraries... yes
> checking whether to build shared libraries... yes
> checking whether to build static libraries... no
> configure: creating libtool
> appending configuration tag "CXX" to libtool
> checking for ld used by g++... /usr/bin/ld
> checking if the linker (/usr/bin/ld) is GNU ld... no
> checking whether the g++ linker (/usr/bin/ld) supports shared  
> libraries... yes
> checking for g++ option to produce PIC... -fno-common
> checking if g++ PIC flag -fno-common works... yes
> checking if g++ static flag -static works... no
> checking if g++ supports -c -o file.o... yes
> checking whether the g++ linker (/usr/bin/ld) supports shared  
> libraries... yes
> checking dynamic linker characteristics... darwin8.10.0 dyld
> checking how to hardcode library paths into programs... immediate
> appending configuration tag "F77" to libtool
> checking for /proc/self/maps... no
> checking whether everything is installed to the same prefix... yes
> checking whether binary relocation support should be enabled... no
> checking bankdata path... ${pkgdatadir}
> checking for a Python interpreter with version >= 2.3... python
> checking for python... /usr/bin/python
> checking for python version... 2.3
> checking for python platform... darwin
> checking for python script directory... ${prefix}/lib/python2.3/site- 
> packages
> checking for python extension module directory... ${exec_prefix}/lib/ 
> python2.3/site-packages
> checking whether to install python-bindings... yes
> configure: creating ./config.status
> ./configure: line 24718: 21256 Bus error               $SHELL  
> $CONFIG_STATUS $ac_config_status_args
> 
> Error: The following dependencies failed to build: aqbanking  
> ktoblzcheck libglade2 fontconfig freetype gtk2 atk glib2 pkgconfig  
> cairo libpng render xrender jpeg pango Xft2 xorg-xproto xorg-util- 
> macros tiff libofx opensp libtool qt3 perl5.8 evince audiofile avahi  
> dbus docbook-xml-4.1.2 xmlcatmgr xmlto docbook-xml-4.2 docbook-xsl  
> getopt libxslt dbus-glib dbus-python25 py25-gobject python25 py25- 
> numeric gdbm libdaemon py25-gdbm py25-gtk py25-cairo esound gconf  
> intltool p5-xml-parser orbit2 libidl gnome-doc-utils docbook-xml  
> docbook-xml-4.3 docbook-xml-4.4 docbook-xml-4.5 iso-codes py25- 
> libxml2 scrollkeeper gnome-keyring libgcrypt libgpg-error gnome-vfs  
> gnome-mime-data howl neon openssl libart_lgpl libgnome libgnomecanvas  
> gail libgnomeui libbonoboui libbonobo popt m4 nautilus eel gnome- 
> desktop fribidi startup-notification gnome-menus libexif librsvg  
> libcroco libgsf shared-mime-info poppler poppler-data gnucash-docs  
> yelp firefox-x11 gnome-icon-theme hicolor-icon-theme icon-naming- 
> utils p5-xml-simple p5-test-simple p5-test-harness p5-xml- 
> namespacesupport p5-xml-sax zip libgtkhtml goffice libgnomeprintui  
> libgnomeprint bison libgnomecups pcre guile16 readline ncurses  
> ncursesw libgtkhtml3 p5-finance-quote p5-crypt-ssleay p5-libwww-perl  
> p5-compress-zlib p5-compress-raw-zlib p5-io-compress-base p5-scalar- 
> list-utils p5-io-compress-zlib p5-html-parser p5-html-tagset p5-uri  
> p5-datemanip p5-html-tableextract slib slib-guile16
> Error: Status 1 encountered during processing.
> 
> 
> 
> --
> 
> Sometimes I lie awake at night, and ask, "Where have I gone wrong?"
> Then a voice says to me, "This is going to take more than one  
> night." (Charlie Brown)

Hallo
hast Du mal Fink probiert? Ich arbeite damit und es klappt ganz gut
Viel Erfolg