[gnucash-de] Gnucash 2.2.9 & aqbanking 4.0.0

[Jörg Schaible]

Hallo Martin,

Martin Preuss wrote:

> Moin,
> 
> On Mittwoch, 29. Juli 2009, Jörg Schaible wrote:
>> Martin Preuss wrote:
> [...]
>> $ aqhbci-tool4 adduserflags -c XXX -f forcesslv3
>> Adding flags: 00000000
> [...]
> 
> Sorry, die Option heisst "forcessl3" (also ohne "v").
> Bei "Adding flags" sollte dann etwas anderes stehen als "00000000".

OK, das setzen klappt jetzt, aber leider trotzdem kein Erfolg:

============= %< ==================
$ aqhbci-tool4 adduserflags -c XXX -f forcessl3
Adding flags: 00000040
$ aqbanking-cli request -a XXX -b 70010080 --balance
Executing Jobs: Started.
Sending jobs to the bank(s)
Locking users
Locking user XXX
Executing HBCI jobs
AqHBCI started
Connecting to bank...
Resolving hostname "hbci.postbank.de" ...
IP address is 62.153.105.23
Selecting iTAN mode "iTAN"
Opening dialog
Encoding queue
3:2009/07/29 21-59-20:aqhbci(11552):user.c: 1017: Missing tokenType or
tokenName
===== Enter PIN =====
Please enter the PIN for
user XXX at Postbank (Giro)

Input: *****
Sending queue
Connecting to bank...
Connected.
Waiting for response
3:2009/07/29 21-59-30:gwen(11552):io_tls.c: 1248: gnutls_bye: -10 (The
specified session has been invalidated for some reason.)
No response (timeout)
3:2009/07/29 21-59-30:aqhbci(11552):outbox.c: 1410: Error performing queue
(-1002)
AqHBCI finished.
5:2009/07/29 21-59-30:aqbanking(11552):banking_online.c:  123: Error
executing backend's queue
4:2009/07/29 21-59-30:aqbanking(11552):banking_online.c:  141: Not a single
job successfully executed
Postprocessing jobs
Resetting provider queues
Executing Jobs: Finished.
============= %< ==================

Der Fehler oben ist jetzt wieder derselbe wie bei meinem allerersten
Console-Log ... jetzt wird es ominös. Ich hab' es jetzt mehrfach probiert
und den Fehler oben bekommen, aber plötzlich kam dieses mal:

============= %< ==================
$ aqbanking-cli request -a XXX -b 70010080 --balance
Executing Jobs: Started.
Sending jobs to the bank(s)
Locking users
Locking user XXX
Executing HBCI jobs
AqHBCI started
Connecting to bank...
Resolving hostname "hbci.postbank.de" ...
IP address is 62.153.105.23
Selecting iTAN mode "iTAN"
Opening dialog
Encoding queue
3:2009/07/29 22-07-00:aqhbci(11615):user.c: 1017: Missing tokenType or
tokenName
===== Enter PIN =====
Please enter the PIN for
user XXX at Postbank (Giro)

Input: *****
Sending queue
Connecting to bank...
Connected.
Waiting for response
HTTP-Status: 200 (OK)
Disconnecting from bank...
3:2009/07/29 22-07-08:gwen(11615):io_tls.c: 1248: gnutls_bye: -10 (The
specified session has been invalidated for some reason.)
Disconnected.
Response received
HBCI: 3060 - Teilweise liegen Warnungen/Hinweise vor. (M)
HBCI: 0020 - Angemeldet. (S)
HBCI: 0020 - Informationen fehlerfrei entgegengenommen. (S)
HBCI: 3920 - Zugelassene Ein- und Zwei-Schritt-Verfahren f?r den Benutzer
(S)
Dialog not aborted, assuming PIN is ok
3:2009/07/29 22-07-08:aqhbci(11615):user.c: 1017: Missing tokenType or
tokenName
Encoding queue
3:2009/07/29 22-07-08:aqhbci(11615):user.c: 1017: Missing tokenType or
tokenName
Sending queue
Connecting to bank...
Connected.
Waiting for response
HTTP-Status: 200 (OK)
Disconnecting from bank...
3:2009/07/29 22-07-52:gwen(11615):io_tls.c: 1248: gnutls_bye: -10 (The
specified session has been invalidated for some reason.)
Disconnected.
Response received
HBCI: 0010 - Die Nachricht wurde entgegengenommen. (M)
HBCI: 0020 - Der Auftrag wurde ausgef?hrt. (S)
Dialog not aborted, assuming PIN is ok
3:2009/07/29 22-07-52:aqhbci(11615):user.c: 1017: Missing tokenType or
tokenName
Closing dialog
Encoding queue
3:2009/07/29 22-07-52:aqhbci(11615):user.c: 1017: Missing tokenType or
tokenName
Sending queue
Connecting to bank...
Connected.
Waiting for response
HTTP-Status: 200 (OK)
Disconnecting from bank...
3:2009/07/29 22-08-09:gwen(11615):io_tls.c: 1248: gnutls_bye: -10 (The
specified session has been invalidated for some reason.)
Disconnected.
Response received
HBCI: 0100 - Der Dialog wurde beendet. (M)
HBCI: 0020 - Benutzer abgemeldet. (S)
Dialog not aborted, assuming PIN is ok
3:2009/07/29 22-08-10:aqhbci(11615):user.c: 1017: Missing tokenType or
tokenName
AqHBCI finished.
Executing Jobs: 1 of 1
Postprocessing jobs
Resetting provider queues
Executing Jobs: Finished.
accountInfoList {
  accountInfo {
    char bankCode="70010080"
    char bankName="Postbank N%C3%BCrnberg"
    char accountNumber="XXX"
    char accountName="Postbank Giro plus"
    char owner="YYY"
    char currency="EUR"
    int  accountType="1"
    int  accountId="0"

    statusList {
      status {
        int  time="1248898090"

        bookedBalance {
          value {
            char value="ZZZ"
            char currency="EUR"
          } #value

          int  time="1248898090"
        } #bookedBalance
      } #status
    } #statusList
  } #accountInfo
} #accountInfoList
============= %< ==================

Nach dem "Waiting for repsonse" ging es fast 20 Sekunden (im Log ja zu
sehen), danngings weiter. Weitere 2 Versuche haben jetzt dann ohne
Verzögerung funktioniert ... aber jetzt kommt nach ein paar Minuten ständig
wieder:

============= %< ==================
$ aqbanking-cli request -a XXX -b 70010080 --balance
Executing Jobs: Started.
Sending jobs to the bank(s)
Locking users
Locking user XXX
Executing HBCI jobs
AqHBCI started
Connecting to bank...
Resolving hostname "hbci.postbank.de" ...
IP address is 62.153.105.23
Selecting iTAN mode "iTAN"
Opening dialog
Encoding queue
3:2009/07/29 22-15-17:aqhbci(11697):user.c: 1017: Missing tokenType or
tokenName
===== Enter PIN =====
Please enter the PIN for
user XXX at Postbank (Giro)

Input: *****
Sending queue
Connecting to bank...
Connected.
Waiting for response
HTTP-Status: 200 (OK)
Disconnecting from bank...
3:2009/07/29 22-15-20:gwen(11697):io_tls.c: 1248: gnutls_bye: -10 (The
specified session has been invalidated for some reason.)
Disconnected.
Response received
HBCI: 3060 - Teilweise liegen Warnungen/Hinweise vor. (M)
HBCI: 0020 - Angemeldet. (S)
HBCI: 0020 - Informationen fehlerfrei entgegengenommen. (S)
HBCI: 3920 - Zugelassene Ein- und Zwei-Schritt-Verfahren f?r den Benutzer
(S)
Dialog not aborted, assuming PIN is ok
3:2009/07/29 22-15-20:aqhbci(11697):user.c: 1017: Missing tokenType or
tokenName
Encoding queue
3:2009/07/29 22-15-20:aqhbci(11697):user.c: 1017: Missing tokenType or
tokenName
Sending queue
Connecting to bank...
Connected.
Waiting for response
3:2009/07/29 22-15-24:gwen(11697):io_tls.c: 1248: gnutls_bye: -10 (The
specified session has been invalidated for some reason.)
No response (timeout)
3:2009/07/29 22-15-24:aqhbci(11697):outbox.c: 1410: Error performing queue
(-1002)
AqHBCI finished.
5:2009/07/29 22-15-24:aqbanking(11697):banking_online.c:  123: Error
executing backend's queue
4:2009/07/29 22-15-24:aqbanking(11697):banking_online.c:  141: Not a single
job successfully executed
Postprocessing jobs
Resetting provider queues
Executing Jobs: Finished.
============= %< ==================

Seufz.

Mit welcher Version von GnuTLS testest Du? Bei mir läuft - wie gesagt -
Version 2.6.6.

Grüße,
Jörg

PS: Danke für die prompte Hilfe hier.