Compiling problems on OpenSuse 10.0

Stefan Norin stefan.norin at bredband.net
Fri Jul 21 08:03:44 EDT 2006 

What I had done was to manually install and compile some GNOME files including 
glib. I uninstalled these and instead installed the packages from my 
distribution. I have now managed to comile GnuCash and it works fine for me. 
Thanks again for your help.

/Stefan

fredag 21 juli 2006 01:34 skrev Derek Atkins:
> Wait!  You said you have glib-2.10 installed, but this list
> claims you have glib-2.8.1.   The configure test is FINDING
> glib >= 2.9, because HAVE_GLIB29 is set.  BUT your rpms don't
> match.
>
> What's going on here?  What have you done to your system?
>
> -derek
>
> Quoting Stefan Norin <stefan.norin at bredband.net>:
> > grep HAVE_GLIB config.h returns
> >
> > #define HAVE_GLIB26 1
> > #define HAVE_GLIB29 1
> >
> > rpm -qa | grep -i glib returns
> >
> > taglib-32bit-1.4-5
> > glibc-32bit-2.3.5-40
> > glib2-2.8.1-3
> > dbus-1-glib-32bit-0.35.2-8
> > dbus-1-glib-0.35.2-8
> > glib2-32bit-2.8.1-3
> > glibc-locale-32bit-2.3.5-40
> > glibc-locale-2.3.5-40
> > glib-1.2.10-595
> > taglib-1.4-5
> > glib2-devel-2.8.1-3
> > glibc-devel-2.3.5-40
> > glib-32bit-1.2.10-595
> > glibc-i18ndata-2.3.5-40
> > glibc-2.3.5-40
> > glib-devel-1.2.10-595
> >
> > The compile line before the error is:
> >
> > gcc -I../../../src/test-core -I.. -pthread -I/usr/local/include/glib-2.0
> > -I/usr/local/lib/glib-2.0/include -g -O2 -Wall -Wunused
> > -Wmissing-prototypes -Wmissing-declarations -Wdeclaration-after-statement
> > -Wno-pointer-sign -D_FORTIFY_SOURCE=2 -o .libs/test-link-module
> > test-link-module.o  ../../../src/engine/.libs/libgncmod-engine.so
> > -L/usr/local/lib -L/usr/X11R6/lib64 -L/opt/gnome/lib64
> > -L/usr/lib64 ../.libs/libgncmod-network-utils.so
> > /home/stefan/gnucash-2.0.0/src/gnc-module/.libs/libgncmodule.so
> > /home/stefan/gnucash-2.0.0/src/core-utils/.libs/libcore-utils.so
> > /usr/local/lib/libgwrap-guile-runtime.so
> > /usr/local/lib/libgwrap-core-runtime.so /usr/local/lib/../lib64/libffi.so
> > /usr/lib64/libguile.so /usr/lib64/libguile-ltdl.so -lcrypt
> > -lffi /usr/lib64/libltdl.so /opt/gnome/lib64/libgnomeui-2.so
> > /usr/lib64/libjpeg.so /opt/gnome/lib64/libbonoboui-2.so
> > /opt/gnome/lib64/libgnome-2.so /opt/gnome/lib64/libgnomevfs-2.so -lssl
> > -lcrypto
> > -ldns_sd /opt/gnome/lib64/libbonobo-2.so
> > /opt/gnome/lib64/libbonobo-activation.so
> > /opt/gnome/lib64/libORBitCosNaming-2.so /usr/lib64/libxml2.so
> > /opt/gnome/lib64/libgconf-2.so /opt/gnome/lib64/libORBit-2.so
> > /opt/gnome/lib64/libgthread-2.0.so /opt/gnome/lib64/libgnome-keyring.so
> > /opt/gnome/lib64/libgnomecanvas-2.so /opt/gnome/lib64/libgtk-x11-2.0.so
> > /opt/gnome/lib64/libgdk-x11-2.0.so /opt/gnome/lib64/libatk-1.0.so
> > /opt/gnome/lib64/libgdk_pixbuf-2.0.so
> > /opt/gnome/lib64/libpangocairo-1.0.so /usr/lib64/libcairo.so
> > /usr/lib64/libglitz.so /usr/lib64/libart_lgpl_2.so
> > /opt/gnome/lib64/libpangoft2-1.0.so /opt/gnome/lib64/libpango-1.0.so
> > /opt/gnome/lib64/libgobject-2.0.so /opt/gnome/lib64/libgmodule-2.0.so
> > /opt/gnome/lib64/libglib-2.0.so /usr/local/lib/libgnome-2.so
> > /usr/lib64/libesd.so /usr/lib64/libasound.so -lresmgr
> > /usr/lib64/libaudiofile.so /usr/local/lib/libart_lgpl_2.so
> > /usr/local/lib/libgtk-x11-2.0.so /usr/local/lib/libgdk-x11-2.0.so
> > /usr/local/lib/libatk-1.0.so /usr/local/lib/libgdk_pixbuf-2.0.so
> > /usr/local/lib/libpangocairo-1.0.so /usr/local/lib/libpangoft2-1.0.so
> > /usr/local/lib/libpango-1.0.so /usr/local/lib/libcairo.so -lSM -lICE
> > -lXrender -lX11 -lXext
> > -lpng12 /usr/lib64/libfontconfig.so /usr/lib64/libfreetype.so
> > /usr/lib64/libexpat.so /usr/local/lib/libgnomevfs-2.so
> > /usr/local/lib/libxml2.so -lz -lresolv -lutil
> > -lrt /usr/local/lib/libbonobo-2.so /usr/local/lib/libgconf-2.so
> > /usr/local/lib/libbonobo-activation.so
> > /usr/local/lib/libORBitCosNaming-2.so /usr/local/lib/libORBit-2.so
> > /home/stefan/gnucash-2.0.0/lib/libqof/qof/.libs/libgncqof.so
> > /usr/local/lib/libgthread-2.0.so -lpthread
> > /usr/local/lib/libgobject-2.0.so /usr/local/lib/libgmodule-2.0.so -ldl
> > /usr/local/lib/libglib-2.0.so /usr/lib64/libpopt.so -lm -Wl,--rpath
> > -Wl,/usr/local/lib/gnucash -Wl,--rpath -Wl,/usr/local/lib/../lib64
> >
> > /Stefan
> >
> > fredag 21 juli 2006 00:33 skrev du:
> >> Huh.  Are you sure?  It certainly looks like you have remnants of
> >> different versions of glib/gtk installed.  What do you get from:
> >>
> >>   grep HAVE_GLIB config.h
> >>
> >> g_slice_alloc is only in lib/libqof/qof/guid.c, and it's only used
> >> for GLIB 2.9 and above.  You have 2.10, so it should be there.  The
> >> fact that it's not means something is really wrong on your system.
> >> I've got glib-2.10.3-1 and gtk2-2.8.18-1 (this is on FC5) and it
> >> works fine for me.  Also, no other OpenSuSE users have complained,
> >> either.
> >>
> >> What do you get from:
> >>
> >>   rpm -qa | grep -i glib
> >>
> >> Also, what's the actual compile line before this most recent error?
> >>
> >> -derek
> >>
> >> Quoting Stefan Norin <stefan.norin at bredband.net>:
> >> > I have glib-2.10.3, gdk-pixbuf-0.22.0 and GTK2+-2.8.3
> >> >
> >> > /Stefan
> >> >
> >> > torsdag 20 juli 2006 23:52 skrev Derek Atkins:
> >> >> What versions of glib, gtk, and gdk do you have?
> >> >>
> >> >> -derek
> >> >>
> >> >> Quoting Stefan Norin <stefan.norin at bredband.net>:
> >> >> > I just used ./configure. Went through config.h and noted that it
> >> >> > was just as you suspected (thanks for your help); it was mistakenly
> >> >> > compiled with -disable-deprecated-gnome, gtk, gdk, glib and qof.
> >> >> > Then I did ./configure again with the ---enable option, but during
> >> >> > make I ended up with a new error message:
> >> >> >
> >> >> > ../../../src/engine/.libs/libgncmod-engine.so: undefined reference
> >> >> > to `g_date_set_time_t'
> >> >> > /home/stefan/gnucash-2.0.0/lib/libqof/qof/.libs/libgncqof.so:
> >> >> > undefined reference to `g_slice_alloc'
> >> >> > /home/stefan/gnucash-2.0.0/lib/libqof/qof/.libs/libgncqof.so:
> >> >> > undefined reference to `g_slice_free1'
> >> >> > collect2: ld returned 1 exit status
> >> >> > make[4]: *** [test-link-module] Fel 1
> >> >> > make[4]: Leaving directory
> >> >> > `/home/stefan/gnucash-2.0.0/src/network-utils/test'
> >> >> > make[3]: *** [all-recursive] Fel 1
> >> >> > make[3]: Leaving directory
> >> >> > `/home/stefan/gnucash-2.0.0/src/network-utils' make[2]: ***
> >> >> > [all-recursive] Fel 1
> >> >> > make[2]: Leaving directory `/home/stefan/gnucash-2.0.0/src'
> >> >> > make[1]: *** [all-recursive] Fel 1
> >> >> > make[1]: Leaving directory `/home/stefan/gnucash-2.0.0'
> >> >> > make: *** [all] Fel 2
> >> >> >
> >> >> > ./configure without --enable-deprecated-qof resulted in the same
> >> >> > error message.
> >> >> >
> >> >> > I'm sorry for this questions but I'm a newbie on compiling and
> >> >> > would therefore
> >> >> > be very thankful for any further help.
> >> >> >
> >> >> > torsdag 20 juli 2006 15:45 skrev Derek Atkins:
> >> >> >> What /IS/ your configure line?
> >> >> >>
> >> >> >> -derek
> >> >> >>
> >> >> >> Stefan Norin <stefan.norin at bredband.net> writes:
> >> >> >> > I tried both with and without this configure option but ended up
> >> >> >> > with the same result. Any clues??
> >> >> >> >
> >> >> >> >
> >> >> >> > /Stefan
> >> >> >> >
> >> >> >> > torsdag 20 juli 2006 00:31 skrev Derek Atkins:
> >> >> >> >> Did you mistakenly use the --disable-deprecated-gtk configure
> >> >> >> >> option?
> >> >> >> >>
> >> >> >> >> -derek
> >> >> >> >>
> >> >> >> >> Quoting Stefan Norin <stefan.norin at bredband.net>:
> >> >> >> >> > I tried to compile Gnucash-2.0.0 on my OpenSuse 10.0 system
> >> >> >> >> > after installing the
> >> >> >> >> > necessary packages mentioned in the README.dependencies file.
> >> >> >> >> > Configure worked fine, but make failed and ŕeturned this
> >> >> >> >> > error:
> >> >> >> >> >
> >> >> >> >> > In file included from
> >> >> >> >> > /opt/gnome/include/gtk-2.0/gtk/gtk.h:60, from
> >> >> >> >> > gnc-gobject-utils.c:29:
> >> >> >> >> > /opt/gnome/include/gtk-2.0/gtk/gtkclist.h:155: error: syntax
> >> >> >> >> > error before 'GMemC
> >> >> >> >> > hunk'
> >> >> >> >> > /opt/gnome/include/gtk-2.0/gtk/gtkclist.h:155: warning: no
> >> >> >> >> > semicolon at end of s
> >> >> >> >> > truct or union
> >> >> >> >> > /opt/gnome/include/gtk-2.0/gtk/gtkclist.h:156: warning: type
> >> >> >> >> > defaults to 'int' i
> >> >> >> >> > n declaration of 'cell_mem_chunk'
> >> >> >> >> > /opt/gnome/include/gtk-2.0/gtk/gtkclist.h:156: warning: data
> >> >> >> >> > definition has no t
> >> >> >> >> > ype or storage class
> >> >> >> >> > /opt/gnome/include/gtk-2.0/gtk/gtkclist.h:245: error: syntax
> >> >> >> >> > error before '}' to
> >> >> >> >> >
> >> >> >> >> > ken In file included from
> >> >> >> >> > /opt/gnome/include/gtk-2.0/gtk/gtk.h:68, from
> >> >> >> >> > gnc-gobject-utils.c:29:
> >> >> >> >> > /opt/gnome/include/gtk-2.0/gtk/gtkctree.h:110: error: field
> >> >> >> >> > 'clist' has incomple
> >> >> >> >> >
> >> >> >> >> >    te type
> >> >> >> >> > In file included from
> >> >> >> >> > /opt/gnome/include/gtk-2.0/gtk/gtk.h:152, from
> >> >> >> >> > gnc-gobject-utils.c:29:
> >> >> >> >> > /opt/gnome/include/gtk-2.0/gtk/gtkstatusbar.h:68: error:
> >> >> >> >> > syntax error before 'GM
> >> >> >> >> >
> >> >> >> >> >    emChunk'
> >> >> >> >> > /opt/gnome/include/gtk-2.0/gtk/gtkstatusbar.h:68: warning: no
> >> >> >> >> > semicolon at end o
> >> >> >> >> >
> >> >> >> >> > f struct or union
> >> >> >> >> > /opt/gnome/include/gtk-2.0/gtk/gtkstatusbar.h:82: error:
> >> >> >> >> > syntax error before '}'
> >> >> >> >> >
> >> >> >> >> >     token
> >> >> >> >> > make[4]: *** [gnc-gobject-utils.lo] Fel 1
> >> >> >> >> > make[4]: Leaving directory
> >> >> >> >> > `/home/stefan/gnucash-2.0.0/src/core-utils' make[3]: ***
> >> >> >> >> > [all] Fel 2
> >> >> >> >> > make[3]: Leaving directory
> >> >> >> >> > `/home/stefan/gnucash-2.0.0/src/core-utils' make[2]: ***
> >> >> >> >> > [all-recursive] Fel 1
> >> >> >> >> > make[2]: Leaving directory `/home/stefan/gnucash-2.0.0/src'
> >> >> >> >> > make[1]: *** [all-recursive] Fel 1
> >> >> >> >> > make[1]: Leaving directory `/home/stefan/gnucash-2.0.0'
> >> >> >> >> > make: *** [all] Fel 2
> >> >> >> >> >
> >> >> >> >> > Any help would be greatly appreciated.
> >> >> >> >> >
> >> >> >> >> >
> >> >> >> >> >
> >> >> >> >> > _______________________________________________
> >> >> >> >> > gnucash-user mailing list
> >> >> >> >> > gnucash-user at gnucash.org
> >> >> >> >> > https://lists.gnucash.org/mailman/listinfo/gnucash-user
> >> >> >> >> > -----
> >> >> >> >> > Please remember to CC this list on all your replies.
> >> >> >> >> > You can do this by using Reply-To-List or Reply-All.
> >
> > -------------------------------------------------------
> >
> > _______________________________________________
> > gnucash-user mailing list
> > gnucash-user at gnucash.org
> > https://lists.gnucash.org/mailman/listinfo/gnucash-user
> > -----
> > Please remember to CC this list on all your replies.
> > You can do this by using Reply-To-List or Reply-All.

More information about the gnucash-user mailing list