Mac Install Problem 10.5

[Some Guy]

How would I go about setting these links up? Sorry not that up to speed with
all this terminal stuff

On Jan 8, 2008 2:41 PM, Rudye McGlothlin <Rudye at liquidox.com> wrote:

> I'm still using 10.4, but I had the same trouble.  I finally got mine
> to work by setting up the symbolic links described here: http://
> www.nabble.com/-13472%3A-gnucash-2.2.1-fails-to-build-on-Leopard-%
> 2810.5.1%29-to14122502.html
>
> Once you get it installed, let me know if your charts work
> correctly.  Mine are still all squirrely.
>
> Regards,
> Rudye
>
>
> On Jan 7, 2008, at 2:57 PM, Some Guy wrote:
>
> > I was wondering if anyone has had any luck yet at getting gnucash
> > working
> > under 10.5.*?
> >
> > After some back and forth on the port mail list all the dependancys
> > now
> > install fine (yay).
> >
> > There seems to be one last problem with the port file
> > sudo port install gnucash +without_docsPassword:
> > --->  Configuring gnucash
> > Error: Target org.macports.configure returned: configure failure:
> > shell
> > command " cd
> > "/opt/local/var/macports/build/
> > _opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome
> > _gnucash/work/gnucash-
> > 2.2.1" && ./configure --prefix=/opt/local --disable-glibtest --
> > disable-debug
> > --disable-profile --disable-dependency-tracking --enable-hbci --
> > enable-ofx "
> > returned error 1
> > Command output: checking for unistd.h... (cached) yes
> > checking wctype.h usability... yes
> > checking wctype.h presence... yes
> > checking for wctype.h... yes
> > checking for dlsym... yes
> > checking for dlerror... yes
> > checking for darwin... yes, moving on...
> > checking for qt_null in -lqthreads... no
> > checking for qt_null in -lqt... no
> > checking for main in -ltermcap... yes
> > checking for main in -lreadline... yes
> > checking for guile-config... no
> > checking for build-guile... (cached) no
> > checking for sin in -lm... yes
> > checking for main in -lrx... no
> > checking for qt_null in -lqt... (cached) no
> > checking for dlopen in -ldl... (cached) yes
> > checking for t_accept in -lnsl... no
> > checking for socket in -lsocket... no
> > checking whether guile works... no
> > configure: WARNING: Can not find Guile on this system
> > checking for guile... no
> > checking for guile - 1.6.0 <= version < 99.99.99... no:
> > configure: WARNING: guile version check failed
> > configure: error:
> >
> >   guile does not appear to be installed correctly, or is not in the
> >   correct version range.  Perhaps you have not installed the guile
> >   development packages?  Gnucash requires at least version 1.6 to
> > build.
> >
> >
> > Error: Status 1 encountered during processing.
> >
> >
> > On Dec 20, 2007 3:03 PM, David Reiser <dbreiser at earthlink.net> wrote:
> >
> >> I don't know macports very much at all, but the change needs to be
> >> associated with the aqbanking port. So if you can figure out how
> >> to modify
> >> the aqbanking port (probably installing that by itself with local
> >> modifications to the port file), then you can install gnucash.
> >> You probably want to email the aqbanking port maintainer, too.
> >>
> >> Dave
> >>
> >> On Dec 20, 2007, at 9:57 AM, Some Guy wrote:
> >>
> >> Thanks for the reply
> >>
> >> I know this may sound silly, but how do I do that? I tried to
> >> append it to
> >> end of the sudo port install gnucash but that does not work
> >>
> >>
> >> Thanks in advance for the help
> >>
> >> On Dec 20, 2007 2:42 PM, David Reiser <dbreiser at earthlink.net> wrote:
> >>
> >>> You need to add
> >>>
> >>> -Wl,-dylib_file,/System/Library/Frameworks/OpenGL.framework/
> >>> Versions/A/
> >>> Libraries/libGL.dylib:/System/Library/Frameworks/OpenGL.framework/
> >>> Versions/A/Libraries/libGL.dylib
> >>>
> >>> to the LDFLAGS for building aqbanking. Welcome to Apple's latest
> >>> twist
> >>> to the build system.
> >>>
> >>> Dave
> >>> On Dec 20, 2007, at 6:55 AM, Some Guy wrote:
> >>>
> >>>> Hi, I have been trying to install gnucash on my Mac running
> >>>> Leopard.
> >>>> I am
> >>>> using MacPort to do it. I type "sudo port install gnucash" and
> >>>> after
> >>>> a while
> >>>> I get an error. What can I do to fix this? I have ran it again and
> >>>> this is
> >>>> the output in the terminal.
> >>>>
> >>>> Password:
> >>>> --->  Building aqbanking with target all
> >>>> Error: Target org.macports.build returned: shell command " cd
> >>>> "/opt/local/var/macports/build/
> >>>> _opt_local_var_macports_sources_rsync
> >>>> .macports.org_release_ports_devel_aqbanking/work/aqbanking-
> >>>> 2.2.9" && make all " returned error 2
> >>>> Command output: make[6]: Nothing to be done for `all'.
> >>>> Making all in dialogs
> >>>> make[6]: Nothing to be done for `all'.
> >>>> Making all in views
> >>>> make[6]: Nothing to be done for `all'.
> >>>> make[6]: Nothing to be done for `all-am'.
> >>>> Making all in qbanking
> >>>> Making all in lib
> >>>> make  all-recursive
> >>>> Making all in widgets
> >>>> make  all-am
> >>>> make[8]: Nothing to be done for `all-am'.
> >>>> Making all in dialogs
> >>>> make  all-am
> >>>> make[8]: Nothing to be done for `all-am'.
> >>>> Making all in views
> >>>> make  all-am
> >>>> make[8]: Nothing to be done for `all-am'.
> >>>> /bin/sh ../../../../libtool --tag=CXX --mode=link /usr/bin/g+
> >>>> +-4.0  -
> >>>> O2 -g
> >>>> -Wall  -L/opt/local/lib -g -o testlib  testlib.o
> >>>> libqbanking.la/opt/local/var/macports/build/
> >>>> _opt_local_var_macports_sources_rsync
> >>>> .macports.org_release_ports_devel_aqbanking/work/aqbanking-
> >>>> 2.2.9/src/libs/aqbanking/libaqbanking.la -lintl
> >>>> /usr/bin/g++-4.0 -O2 -g -Wall -g -o .libs/testlib
> >>>> testlib.o-Wl,-bind_at_load  -L/opt/local/lib ./.libs/
> >>>> libqbanking.dylib
> >>>> -L/usr/lib
> >>>> -L/sw/lib -L/opt/local/lib/qt3/lib
> >>>> /opt/local/lib/qt3/lib/libqt- mt.dylib-L/usr/X11R6/lib -lresolv -lz
> >>>> -lGL /usr/X11/lib/libXmu.6.2.0.dylib
> >>>> /opt/local/lib/libXrender.dylib /usr/X11/lib/libXrandr.2.0.0.dylib
> >>>> /usr/X11/lib/libXcursor.1.0.2.dylib /usr/X11/lib/libXinerama.
> >>>> 1.0.0.dylib
> >>>> /opt/local/lib/libXft.dylib /opt/local/lib/libfreetype.dylib
> >>>> /opt/local/lib/libfontconfig.dylib /usr/X11/lib/libXext.6.4.0.dylib
> >>>> /usr/X11/lib/libX11.6.2.0.dylib -lm /usr/X11/lib/libSM.6.0.0.dylib
> >>>> /usr/X11/lib/libICE.6.3.0.dylib -ldl
> >>>> /opt/local/var/macports/build/
> >>>> _opt_local_var_macports_sources_rsync
> >>>> .macports.org_release_ports_devel_aqbanking/work/aqbanking-
> >>>> 2.2.9/src/libs/aqbanking/.libs/libaqbanking.dylib
> >>>> /opt/local/lib/libgwenhywfar.dylib -lssl -lcrypto
> >>>> /opt/local/lib/libintl.dylib /opt/local/lib/libiconv.dylib -lc
> >>>> ld: cycle in dylib re-exports with /usr/X11R6/lib/libGL.dylib
> >>>> collect2: ld returned 1 exit status
> >>>> make[7]: *** [testlib] Error 1
> >>>> make[6]: *** [all-recursive] Error 1
> >>>> make[5]: *** [all] Error 2
> >>>> make[4]: *** [all-recursive] Error 1
> >>>> make[3]: *** [all-recursive] Error 1
> >>>> make[2]: *** [all-recursive] Error 1
> >>>> make[1]: *** [all-recursive] Error 1
> >>>> make: *** [all] Error 2
> >>>>
> >>>> Error: The following dependencies failed to build: aqbanking evince
> >>>> audiofile avahi dbus xmlto getopt dbus-glib dbus-python25 py25-
> >>>> gobject
> >>>
> >>>> python25 py25-numeric gdbm libdaemon py25-gdbm py25-gtk py25-cairo
> >>>> esound
> >>>> gconf intltool orbit2 libidl gnome-doc-utils iso-codes py25-hashlib
> >>>> openssl
> >>>> py25-libxml2 gnome-icon-theme icon-naming-utils p5-getopt-long p5-
> >>>> pathtools
> >>>> p5-xml-simple p5-test-simple p5-test-harness p5-xml-
> >>>> namespacesupport
> >>>> p5-xml-sax gnome-keyring libgcrypt libgpg-error gnome-vfs gnome-
> >>>> mime-
> >>>> data
> >>>> howl neon libart_lgpl libgnome libbonobo popt libgnomecanvas gail
> >>>> libgnomeui
> >>>> libbonoboui m4 nautilus eel gnome-desktop fribidi startup-
> >>>> notification
> >>>> gnome-menus libexif librsvg libcroco libgsf shared-mime-info
> >>>> poppler
> >>>> poppler-data gnucash-docs yelp firefox-x11 zip libgtkhtml goffice03
> >>>> libgnomeprintui libgnomeprint bison libgnomecups pcre guile16
> >>>> readline
> >>>> ncurses ncursesw gawk libgtkhtml3 p5-finance-quote p5-crypt-ssleay
> >>>> p5-libwww-perl p5-compress-zlib p5-compress-raw-zlib p5-io-
> >>>> compress-
> >>>> base
> >>>> p5-scalar-list-utils p5-io-compress-zlib p5-html-parser p5-html-
> >>>> tagset
> >>>> p5-uri p5-datemanip p5-html-tableextract slib slib-guile16
> >>>> Error: Status 1 encountered during processing.
> >>>> _______________________________________________
> >>>> gnucash-user mailing list
> >>>> gnucash-user at gnucash.org
> >>>> https://lists.gnucash.org/mailman/listinfo/gnucash-user
> >>>> -----
> >>>> Please remember to CC this list on all your replies.
> >>>> You can do this by using Reply-To-List or Reply-All.
> >>>
> >>> --
> >>> David Reiser
> >>> dbreiser at earthlink.net
> >>>
> >>>
> >>>
> >>>
> >>>
> >>
> >> --
> >> David Reiser
> >> dbreiser at earthlink.net
> >>
> >>
> >>
> >>
> >>
> > _______________________________________________
> > gnucash-user mailing list
> > gnucash-user at gnucash.org
> > https://lists.gnucash.org/mailman/listinfo/gnucash-user
> > -----
> > Please remember to CC this list on all your replies.
> > You can do this by using Reply-To-List or Reply-All.
>
>