Recent problems building from SVN trunk

[David Herman]

On Fri, 2006-03-10 at 19:42 -0500, Derek Atkins wrote:
> Yeah, I got this as well recently.   Try this:
> 
>   rm -rf /opt/gnucash-svn/*
>   make clean
>   make all install
> 
> -derek
> 
Still not building libgw-app-utils.so.0.  I've tried deleting the build
target and the source directories to no avail.  FIND for
libgw-app-utils.so.0 only locates those for 1.9.2.

Later this weekend I'll try moving to different directories.

Dave

> Quoting David Herman <dvherman at gmail.com>:
> 
> > On Fri, 2006-03-10 at 18:27 -0500, Derek Atkins wrote:
> >> Dammit, this needs to be a FAQ.  You ran rm -rf which left the file
> >> ".links" in the top-level of your source directory.  You either need
> >> to "make distclean" or you need to rm .links so it creates the proper
> >> symlinks.
> >>
> >> -derek
> >>
> > OK That resolved the goffice problem.  Do I feel humble ....
> >
> > However I still have the `libgw-app-utils.la' problem.
> >
> > system is FC4 (i386) current with updates. I get the following from
> >
> > make all install
> >
> > gcc -shared  .libs/gw-app-utils.o  -Wl,--rpath
> > -Wl,/opt/gnucash-svn/lib/gnucash -Wl,--rpath -Wl,/opt/gnucash-svn/lib
> > -L/opt/gnucash-svn/lib/gnucash -lgncmod-app-utils
> > -L/usr/src/build/530333-i386/BUILD/guile-1.6.7/libguile/.libs
> > -L/home/dvherman/GNUCash/gnome2-gnucash/src/engine/.libs
> > -L/home/dvherman/GNUCash/gnome2-gnucash/src/gnc-module/.libs
> > -L/usr/lib/gcc/i386-redhat-linux/4.0.2/../../../
> > -L/home/dvherman/GNUCash/gnome2-gnucash/src/calculation/.libs
> > -L/home/dvherman/GNUCash/gnome2-gnucash/src/core-utils/.libs -L/usr/lib
> > -L/home/dvherman/GNUCash/gnome2-gnucash/lib/libqof/qof/.libs
> > -lgwrap-guile-runtime -lgwrap-core-runtime -lffi -lguile -lguile-ltdl
> > -lqthreads -lpthread -lcrypt -L/opt/gnucash-svn/lib -lqof -lgthread-2.0
> > -lgobject-2.0 -lgmodule-2.0 -ldl -lglib-2.0 -lpopt -lm  -pthread
> > -pthread -pthread -Wl,--export-dynamic -Wl,-soname
> > -Wl,libgw-app-utils.so.0 -o .libs/libgw-app-utils.so.0.0.0
> > /usr/bin/ld: cannot find -lgncmod-app-utils
> > collect2: ld returned 1 exit status
> > libtool: install: error: relink `libgw-app-utils.la' with the above
> > command before installing it
> > make[6]: *** [install-pkglibLTLIBRARIES] Error 1
> > make[6]: Leaving directory
> > `/home/dvherman/GNUCash/gnome2-gnucash/src/app-utils'
> >
> > make -C src/engine all install showed no errors however then next make
> > all install still fails.
> >
> >
> >
> >> Quoting David Herman <dvherman at gmail.com>:
> >>
> >> > I have also been having problem building the SVN trunk, this has been
> >> > going on for several days.
> >> >
> >> > I also was having the problem with "missing libgw-engine.so.0".
> >> >
> >> > Now I'm not getting that far.
> >> >
> >> > After removing the build tree and performing a "checkout" I am no
> >> > getting this - error: goffice/goffice-config.h: No such file or
> >> > directory
> >> >
> >> > log follows
> >> >
> >> > make[7]: Entering directory
> >> > `/home/dvherman/GNUCash/gnome2-gnucash/lib/goffice-0.0.4/goffice/utils'
> >> > if /bin/sh ../../../../libtool --tag=CC --mode=compile gcc
> >> > -DHAVE_CONFIG_H -I. -I. -I../../../.. -I../../../.. -I../../../..
> >> > -I../../../..  -I../../../../lib/libgsf-1.12.3
> >> > -I../../../../lib/goffice-0.0.4 -I../../../../lib/goffice-0.0.4
> >> > -DXTHREADS -D_REENTRANT -DXUSE_MTSAFE_API -I/usr/include/glib-2.0
> >> > -I/usr/lib/glib-2.0/include -I/usr/include/libxml2
> >> > -I/usr/include/pango-1.0 -I/usr/include/freetype2 -I/usr/include/gtk-2.0
> >> > -I/usr/lib/gtk-2.0/include -I/usr/X11R6/include -I/usr/include/atk-1.0
> >> > -I/usr/include/freetype2/config -I/usr/include/libglade-2.0
> >> > -I/usr/include/libgnomeprint-2.2 -I/usr/include/libart-2.0     -g -O2 -g
> >> > -Wall -Wunused -Wmissing-prototypes -Wmissing-declarations   -Werror
> >> > -Wdeclaration-after-statement -Wno-pointer-sign -D_FORTIFY_SOURCE=2 -MT
> >> > go-marshalers.lo -MD -MP -MF ".deps/go-marshalers.Tpo" -c -o
> >> > go-marshalers.lo go-marshalers.c; \
> >> > then mv -f ".deps/go-marshalers.Tpo" ".deps/go-marshalers.Plo"; else rm
> >> > -f ".deps/go-marshalers.Tpo"; exit 1; fi
> >> > gcc -DHAVE_CONFIG_H -I. -I. -I../../../.. -I../../../.. -I../../../..
> >> > -I../../../.. -I../../../../lib/libgsf-1.12.3
> >> > -I../../../../lib/goffice-0.0.4 -I../../../../lib/goffice-0.0.4
> >> > -DXTHREADS -D_REENTRANT -DXUSE_MTSAFE_API -I/usr/include/glib-2.0
> >> > -I/usr/lib/glib-2.0/include -I/usr/include/libxml2
> >> > -I/usr/include/pango-1.0 -I/usr/include/freetype2 -I/usr/include/gtk-2.0
> >> > -I/usr/lib/gtk-2.0/include -I/usr/X11R6/include -I/usr/include/atk-1.0
> >> > -I/usr/include/freetype2/config -I/usr/include/libglade-2.0
> >> > -I/usr/include/libgnomeprint-2.2 -I/usr/include/libart-2.0 -g -O2 -g
> >> > -Wall -Wunused -Wmissing-prototypes -Wmissing-declarations -Werror
> >> > -Wdeclaration-after-statement -Wno-pointer-sign -D_FORTIFY_SOURCE=2 -MT
> >> > go-marshalers.lo -MD -MP -MF .deps/go-marshalers.Tpo -c go-marshalers.c
> >> > -fPIC -DPIC -o .libs/go-marshalers.o
> >> > go-marshalers.c:2:36: error: goffice/goffice-config.h: No such file or
> >> > directory
> >> > make[7]: *** [go-marshalers.lo] Error 1
> >> > make[7]: Leaving directory
> >> > `/home/dvherman/GNUCash/gnome2-gnucash/lib/goffice-0.0.4/goffice/utils'
> >> > make[6]: *** [all] Error 2
> >> > make[6]: Leaving directory
> >> > `/home/dvherman/GNUCash/gnome2-gnucash/lib/goffice-0.0.4/goffice/utils'
> >> > make[5]: *** [all-recursive] Error 1
> >> >
> >> > Any suggestions?
> >> >
> >> >
> >> > _______________________________________________
> >> > gnucash-devel mailing list
> >> > gnucash-devel at gnucash.org
> >> > https://lists.gnucash.org/mailman/listinfo/gnucash-devel
> >> >
> >>
> >>
> >>
> >
> >
> 
> 
>