"No DBD drivers found" warning when running make check

Thu Feb 3 23:56:43 EST 2011

On 02/02/2011 08:35 PM, John Ralls wrote:
> On Feb 2, 2011, at 1:05 PM, Bill Hammond wrote:
>
>> Hi Tommy!
>>
>> On 01/31/2011 11:49 PM, Tommy Trussell wrote:
>>> On Mon, Jan 31, 2011 at 9:36 PM, Bill Hammond <ka1ssr at gmail.com> wrote:
>>>> Hello!
>>>>
>>>> I am having trouble running make check on r20217.  Here's what's happening:
>>>>
>>> ...
>>>
>>>> I'm running Ubuntu 10.10.  I checked and the dbd drivers have been
>>>> installed in /usr/lib/dbd.
>>> I just happened to check out and build r20217 this afternoon on this
>>> Ubuntu 10.04 box, and it worked fine.
>>>
>>> I did go through all the steps exactly as described at
>>> http://wiki.gnucash.org/wiki/Building#Ubuntu_10.04_LTS_.28Lucid_Lynx.29
>>>
>>> so if you used different ./configure parameters that might explain why
>>> mine worked and yours didn't... ?
>> I took the scorched earth approach by starting with a clean slate.  I
>> deleted my ~/development/gnucash installation and started at the
>> beginning of the procedure in the wiki.  I then checked out r20224,
>> executed the time honoured ./autogen.sh / ./configure
>> --prefix=/home/ka1ssr/unstable/gnucash --enable-debug --enable-doxygen
>> --enable-error-on-warning --enable-compile-warnings / make all install. 
>> Now I get this:
>>
>> ...
>>
>> make[5]: Entering directory
>> `/home/ka1ssr/development/gnucash/src/backend/dbi'
>> /bin/bash ../../../libtool --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H
>> -I. -I../../.. -DG_LOG_DOMAIN=\"gnc.backend.dbi\"   -I.. -I../..
>> -DLOCALE_DIR=\""/home/ka1ssr/unstable/gnucash/share/locale"\"
>> -I../../../src/backend -I../../../src/backend/sql -I../../../src/debug
>> -I../../../src/engine -I../../../src/app-utils -I../../../src/core-utils
>> -I../../../lib/libc -I../../../src/libqof/qof -pthread
>> -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include   -DORBIT2=1
>> -pthread -I/usr/include/gconf/2 -I/usr/include/orbit-2.0
>> -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include    -Werror
>> -Wdeclaration-after-statement -g  -g  -Wall -Wunused
>> -Wmissing-prototypes -Wmissing-declarations  -Wno-unused -MT
>> gnc-backend-dbi.lo -MD -MP -MF .deps/gnc-backend-dbi.Tpo -c -o
>> gnc-backend-dbi.lo gnc-backend-dbi.c
>> libtool: compile:  gcc -DHAVE_CONFIG_H -I. -I../../..
>> -DG_LOG_DOMAIN=\"gnc.backend.dbi\" -I.. -I../..
>> -DLOCALE_DIR=\"/home/ka1ssr/unstable/gnucash/share/locale\"
>> -I../../../src/backend -I../../../src/backend/sql -I../../../src/debug
>> -I../../../src/engine -I../../../src/app-utils -I../../../src/core-utils
>> -I../../../lib/libc -I../../../src/libqof/qof -pthread
>> -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -DORBIT2=1 -pthread
>> -I/usr/include/gconf/2 -I/usr/include/orbit-2.0 -I/usr/include/glib-2.0
>> -I/usr/lib/glib-2.0/include -Werror -Wdeclaration-after-statement -g -g
>> -Wall -Wunused -Wmissing-prototypes -Wmissing-declarations -Wno-unused
>> -MT gnc-backend-dbi.lo -MD -MP -MF .deps/gnc-backend-dbi.Tpo -c
>> gnc-backend-dbi.c  -fPIC -DPIC -o .libs/gnc-backend-dbi.o
>> mv -f .deps/gnc-backend-dbi.Tpo .deps/gnc-backend-dbi.Plo
>> make[5]: *** No rule to make target
>> `../../../src/app-utils/libgncmod-app-utils.la', needed by
>> `libgncmod-backend-dbi.la'.  Stop.
>> make[5]: Leaving directory
>> `/home/ka1ssr/development/gnucash/src/backend/dbi'
>> make[4]: *** [all-recursive] Error 1
>> make[4]: Leaving directory
>> `/home/ka1ssr/development/gnucash/src/backend/dbi'
>> make[3]: *** [all-recursive] Error 1
>> make[3]: Leaving directory `/home/ka1ssr/development/gnucash/src/backend'
>> make[2]: *** [all-recursive] Error 1
>> make[2]: Leaving directory `/home/ka1ssr/development/gnucash/src'
>> make[1]: *** [all-recursive] Error 1
>> make[1]: Leaving directory `/home/ka1ssr/development/gnucash'
>> make: *** [all] Error 2
>>
>> Thanks for your help with this.
> Sorry, that's my fault. When I moved gnc-locale-utils from app-utils to core-utils (to correct exactly this problem) I failed to change backends/dbi/Makefile.am. If you feel up to it, you can do so yourself (delete line 15 and change app-utils to core-utils in line 36). I'll check in a fix in a bit.
>
> Regards,
> John Ralls
>
Success!  Well...sort of.  I updated to r20228 which fixed the
Makefile.am issue and got rid of a majority of the "no DBD drivers
found" warnings.  There are still warnings when we get to the dbi checks.

...

libtool: link: gcc -I../../../../lib/libc -I../../../../src
-I../../../../src/core-utils -I../../../../src/gnc-module
-I../../../../src/test-core -I../../../../src/engine
-I../../../../src/engine/test-core -I../../../../src/libqof/qof
-I../../../../src/backend/sql -DTEST_MYSQL_URL=\"\"
-DTEST_PGSQL_URL=\"\" -pthread -I/usr/include/glib-2.0
-I/usr/lib/glib-2.0/include -pthread -DORBIT2=1 -pthread
-I/usr/include/gconf/2 -I/usr/include/orbit-2.0 -I/usr/include/glib-2.0
-I/usr/lib/glib-2.0/include -Werror -Wdeclaration-after-statement -g -g
-Wall -Wunused -Wmissing-prototypes -Wmissing-declarations -Wno-unused
-g -o .libs/test-load-backend test-load-backend.o 
../../../../src/test-core/.libs/libtest-core.a
../../../../src/gnc-module/.libs/libgnc-module.so
../../../../src/engine/.libs/libgncmod-engine.so
../../../../src/engine/test-core/.libs/libgncmod-test-engine.a
/home/ka1ssr/development/gnucash/src/engine/.libs/libgncmod-engine.so
/home/ka1ssr/development/gnucash/src/gnc-module/.libs/libgnc-module.so
/home/ka1ssr/development/gnucash/src/core-utils/.libs/libgnc-core-utils.so
/usr/lib/libgconf-2.so /usr/lib/libguile.so /usr/lib/libgmp.so -lcrypt
/usr/lib/libltdl.so -ldl
/home/ka1ssr/development/gnucash/src/libqof/qof/.libs/libgnc-qof.so
/usr/lib/libgobject-2.0.so /usr/lib/libgthread-2.0.so
/usr/lib/libgmodule-2.0.so -lrt /usr/lib/libglib-2.0.so
../../../../src/core-utils/.libs/libgnc-core-utils.so
../../../../src/libqof/qof/.libs/libgnc-qof.so
../../../../src/backend/dbi/test/.libs/libgncmod-test-dbi.a
../../../../src/backend/sql/.libs/libgnc-backend-sql.so
../../../../lib/libc/.libs/libc-missing.a -lpthread -lm -pthread
-Wl,-rpath -Wl,/home/ka1ssr/unstable/gnucash/lib -Wl,-rpath
-Wl,/home/ka1ssr/unstable/gnucash/lib/gnucash
make[6]: Leaving directory
`/home/ka1ssr/development/gnucash/src/backend/dbi/test'
make  check-TESTS
make[6]: Entering directory
`/home/ka1ssr/development/gnucash/src/backend/dbi/test'
* 20:31:53  WARN <gnc.backend.dbi> [gnc_module_init_backend_dbi()] No
DBD drivers found
Using filename: /tmp/test-qoIqq7
Testing sqlite3
* 20:31:53  WARN <gnc.backend.dbi> Session Error: 3,
FAILURE First DB Session Creation Failed test-dbi-stuff.c:181
Testing safe save sqlite3
* 20:31:54  WARN <gnc.backend.dbi> Session Error: 3,
FAILURE DB Session Creation Failed test-dbi-stuff.c:241
/bin/bash: line 5: 19555 Segmentation fault     
GNC_ACCOUNT_PATH=../../../../accounts/C SRCDIR=.
GNC_MODULE_PATH="../../../../src/engine/.libs:${GNC_MODULE_PATH}"
GUILE_LOAD_PATH="../../../../src/engine:${GUILE_LOAD_PATH}"
LD_LIBRARY_PATH="../../../../src/engine/.libs:../../../../src/gnc-module/.libs:../../../../src/core-utils/.libs:../../../../src/libqof/qof/.libs:${LD_LIBRARY_PATH}"
DYLD_LIBRARY_PATH="../../../../src/engine/.libs:../../../../src/gnc-module/.libs:../../../../src/core-utils/.libs:../../../../src/libqof/qof/.libs:${DYLD_LIBRARY_PATH}"
${dir}$tst
FAIL: test-dbi-basic
* 20:31:55  WARN <gnc.backend.dbi> [gnc_module_init_backend_dbi()] No
DBD drivers found
Using filename: /tmp/test-idgDGD
Testing sqlite3
* 20:31:55  WARN <gnc.backend.dbi> Session Error: 3,
FAILURE First DB Session Creation Failed test-dbi-stuff.c:181
TEST_MYSQL_URL=''
TEST_PGSQL_URL=''
Executed 1 test. There was 1 failure.
FAIL: test-dbi
* 20:31:56  WARN <gnc.backend.dbi> [gnc_module_init_backend_dbi()] No
DBD drivers found
Using filename: /tmp/test-75kpZ8
Testing sqlite3
FAILURE TaxTable lists match test-dbi-stuff.c:55
FAILURE Customer lists match test-dbi-stuff.c:55
FAILURE Employee lists match test-dbi-stuff.c:55
 You may ignore the warning about the lock file having no entries: We
had to ignore locking to run two sessions on the same database
Executed 7 tests. There were 3 failures.
FAIL: test-dbi-business
* 20:31:58  WARN <gnc.backend.dbi> [gnc_module_init_backend_dbi()] No
DBD drivers found
Executed 1 test. All tests passed.
PASS: test-load-backend
==========================================
3 of 4 tests failed
Please report to gnucash-devel at gnucash.org
==========================================
make[6]: *** [check-TESTS] Error 1
make[6]: Leaving directory
`/home/ka1ssr/development/gnucash/src/backend/dbi/test'
make[5]: *** [check-am] Error 2
make[5]: Leaving directory
`/home/ka1ssr/development/gnucash/src/backend/dbi/test'
make[4]: *** [check-recursive] Error 1
make[4]: Leaving directory
`/home/ka1ssr/development/gnucash/src/backend/dbi/test'
make[3]: *** [check-recursive] Error 1
make[3]: Leaving directory
`/home/ka1ssr/development/gnucash/src/backend/dbi'
make[2]: *** [check-recursive] Error 1
make[2]: Leaving directory `/home/ka1ssr/development/gnucash/src/backend'
make[1]: *** [check-recursive] Error 1
make[1]: Leaving directory `/home/ka1ssr/development/gnucash/src'
make: *** [check-recursive] Error 1

---

Regards,

Bill Hammond