[GNC-dev] [GNC] UK VAT and "Making Tax Digital"

Christopher Lam christopher.lck at gmail.com
Wed May 15 21:42:58 EDT 2019 

Well done, we have a new builder :)
The Transaction Report also had CSV output enabled (and also enables
original-currency csv output), so, go ahead try break it :)

On Wed, 15 May 2019 at 03:35, Maf. King <maf at chilwell.net> wrote:

> Gents, thanks!
>
> Cmake, make, make install all flawless.  happily running
>
> Version: 3.5
> Build ID: git 2.6.17b-4197-gbeef587e6+(2019-05-12)
>
> will test the VAT report in the next few days (but not tomorrow as I've
> got
> meetings all day).  So far so good, in that it produces sensible CSV
> output on
> the test file.
>
> Will use real accounts data and compare with previous  VAT periods.
>
> Maf.
>
>
>
> On Tuesday, 14 May 2019 17:59:37 BST John Ralls wrote:
> > Maf,
> >
> > There are instructions for enough git in the wiki, linked from the
> > Developers_Source_Code section I gave you earlier.
> >
> > Regards,
> > John Ralls
> >
> > > On May 14, 2019, at 9:37 AM, Maf. King <maf at chilwell.net> wrote:
> > >
> > > Ok, understood.
> > >
> > > I actually downloaded a zip, not a tarball, which I thought sligthly
> odd,
> > > but that's what the green download button gave...
> > >
> > > /me goes off to learn some git.   just enough to be dangerous <wink>
> > >
> > > thanks chaps,
> > >
> > > will report back in due course.
> > >
> > > Maf.
> > >
> > > On Tuesday, 14 May 2019 15:38:22 BST John Ralls wrote:
> > >> Maf, you need to delete your source directory and clone the
> repository.
> > >> See
> > >> https://wiki.gnucash.org/wiki/GnuCash_Sources#Developers_Source_Code
> > >>
> > >> This failure is not at all odd. Building from a Github-generated
> tarball
> > >> is
> > >> guaranteed to fail because it's not pre-swigged and our buildsystem
> only
> > >> invokes swig if it detects that it's using a git clone. We should
> change
> > >> the build so that it detects the absence of the swigged source files
> and
> > >> either sets up to run swig or fails with an intelligible error that
> one
> > >> is
> > >> trying to build in a way that's not supported. I think the former
> makes
> > >> more sense.
> > >>
> > >> Regards,
> > >> John Ralls
> > >>
> > >>> On May 14, 2019, at 6:49 AM, Geert Janssens <
> geert.gnucash at kobaltwit.be>
> > >>> wrote:
> > >>>
> > >>> Hmm, that's odd. And your source directory is a git clone ? Or did
> you
> > >>> download the tarball from git ?
> > >>>
> > >>> Regards,
> > >>>
> > >>> Geert
> > >>>
> > >>> Op dinsdag 14 mei 2019 10:25:03 CEST schreef Maf. King:
> > >>>> On Tuesday, 14 May 2019 09:18:02 BST Maf. King wrote:
> > >>>>> Geert,
> > >>>>>
> > >>>>> No Problem.
> > >>>>>
> > >>>>> swig was not installed.  (suse build-deps error?)
> > >>>>>
> > >>>>> have installed it and cmake is running at the moment...will report
> > >>>>> back
> > >>>>
> > >>>> cmake failed again - i think identically, but haven't looked
> closely.
> > >>>>
> > >>>> there are files that it is looking for that are not in the source
> tree.
> > >>>>
> > >>>> cmake second run output:
> > >>>>
> > >>>> maf at janus:~/src/build-gc-vat> rm -rf *
> > >>>> maf at janus:~/src/build-gc-vat> cmake
> > >>>> -DCMAKE_INSTALL_PREFIX=$HOME/opt/gnucash- vat
> > >>>> ../gnucash-maint-csv-export/
> > >>>> -- The C compiler identification is GNU 7.4.0
> > >>>> -- The CXX compiler identification is GNU 7.4.0
> > >>>> -- Check for working C compiler: /usr/bin/cc
> > >>>> -- Check for working C compiler: /usr/bin/cc -- works
> > >>>> -- Detecting C compiler ABI info
> > >>>> -- Detecting C compiler ABI info - done
> > >>>> -- Detecting C compile features
> > >>>> -- Detecting C compile features - done
> > >>>> -- Check for working CXX compiler: /usr/bin/c++
> > >>>> -- Check for working CXX compiler: /usr/bin/c++ -- works
> > >>>> -- Detecting CXX compiler ABI info
> > >>>> -- Detecting CXX compiler ABI info - done
> > >>>> -- Detecting CXX compile features
> > >>>> -- Detecting CXX compile features - done
> > >>>> -- Found PkgConfig: /usr/bin/pkg-config (found version "0.29.2")
> > >>>> -- Checking for module 'glib-2.0>=2.40'
> > >>>> --   Found glib-2.0, version 2.54.3
> > >>>> -- Checking for module 'gio-2.0'
> > >>>> --   Found gio-2.0, version 2.54.3
> > >>>> -- Checking for module 'gobject-2.0>=2.20'
> > >>>> --   Found gobject-2.0, version 2.54.3
> > >>>> -- Checking for module 'gmodule-2.0>=2.20'
> > >>>> --   Found gmodule-2.0, version 2.54.3
> > >>>> -- Checking for module 'gthread-2.0>=2.20'
> > >>>> --   Found gthread-2.0, version 2.54.3
> > >>>> -- Checking for module 'libxml-2.0>=2.7.0'
> > >>>> --   Found libxml-2.0, version 2.9.7
> > >>>> -- Checking for module 'libxslt'
> > >>>> --   Found libxslt, version 1.1.32
> > >>>> -- Checking for module 'webkit2gtk-4.0'
> > >>>> --   Found webkit2gtk-4.0, version 2.24.1
> > >>>> -- Checking for module 'gtk+-3.0>=3.10.0'
> > >>>> --   Found gtk+-3.0, version 3.22.30
> > >>>> -- Checking for module 'zlib'
> > >>>> --   Found zlib, version 1.2.11
> > >>>> -- Found Gettext: /usr/bin/msgmerge (found suitable version
> "0.19.8.1",
> > >>>> minimum required is "0.19.6")
> > >>>> -- Using guile-2.0.x
> > >>>> -- Using guile SRFI-64
> > >>>> -- Checking for module 'gwenhywfar>=4.9.99'
> > >>>> --   Found gwenhywfar, version 4.18.0
> > >>>> -- Checking for module 'aqbanking>=5.3.4'
> > >>>> --   Found aqbanking, version 5.7.8
> > >>>> -- Checking for module 'gwengui-gtk3'
> > >>>> --   No package 'gwengui-gtk3' found
> > >>>> -- Checking for module 'libofx'
> > >>>> --   Found libofx, version 0.9.12
> > >>>> -- Performing Test HAVE_OFX_BUG_39
> > >>>> -- Performing Test HAVE_OFX_BUG_39 - Failed
> > >>>> -- Found LibXslt: xslt;xml2;m;xml2 (found version "1.1.32")
> > >>>> -- Found Perl: /usr/bin/perl (found version "5.26.1")
> > >>>> -- Checking for module 'icu-uc'
> > >>>> --   Found icu-uc, version 60.2
> > >>>> -- Checking for module 'icu-i18n'
> > >>>> --   Found icu-i18n, version 60.2
> > >>>> -- Checking for module 'libsecret-1>=0.18'
> > >>>> --   Found libsecret-1, version 0.18.5
> > >>>> -- Performing Test have_stringop_truncation
> > >>>> -- Performing Test have_stringop_truncation - Failed
> > >>>> -- Checking for GTEST
> > >>>> -- Looking for pthread.h
> > >>>> -- Looking for pthread.h - found
> > >>>> -- Looking for pthread_create
> > >>>> -- Looking for pthread_create - not found
> > >>>> -- Check if compiler accepts -pthread
> > >>>> -- Check if compiler accepts -pthread - no
> > >>>> -- Looking for pthread_create in pthreads
> > >>>> -- Looking for pthread_create in pthreads - not found
> > >>>> -- Looking for pthread_create in pthread
> > >>>> -- Looking for pthread_create in pthread - found
> > >>>> -- Found Threads: TRUE
> > >>>> -- Checking for GMOCK
> > >>>> -- Looking for include file dirent.h
> > >>>> -- Looking for include file dirent.h - found
> > >>>> -- Looking for include file dlfcn.h
> > >>>> -- Looking for include file dlfcn.h - found
> > >>>> -- Looking for include file glob.h
> > >>>> -- Looking for include file glob.h - found
> > >>>> -- Looking for include file inttypes.h
> > >>>> -- Looking for include file inttypes.h - found
> > >>>> -- Looking for include file limits.h
> > >>>> -- Looking for include file limits.h - found
> > >>>> -- Looking for include file locale.h
> > >>>> -- Looking for include file locale.h - found
> > >>>> -- Looking for include file memory.h
> > >>>> -- Looking for include file memory.h - found
> > >>>> -- Looking for include file stdint.h
> > >>>> -- Looking for include file stdint.h - found
> > >>>> -- Looking for include file stdlib.h
> > >>>> -- Looking for include file stdlib.h - found
> > >>>> -- Looking for include file string.h
> > >>>> -- Looking for include file string.h - found
> > >>>> -- Looking for include file strings.h
> > >>>> -- Looking for include file strings.h - found
> > >>>> -- Looking for include file sys/stat.h
> > >>>> -- Looking for include file sys/stat.h - found
> > >>>> -- Looking for include file sys/time.h
> > >>>> -- Looking for include file sys/time.h - found
> > >>>> -- Looking for include file sys/times.h
> > >>>> -- Looking for include file sys/times.h - found
> > >>>> -- Looking for include file sys/types.h
> > >>>> -- Looking for include file sys/types.h - found
> > >>>> -- Looking for include file sys/wait.h
> > >>>> -- Looking for include file sys/wait.h - found
> > >>>> -- Looking for include file unistd.h
> > >>>> -- Looking for include file unistd.h - found
> > >>>> -- Looking for include file utmp.h
> > >>>> -- Looking for include file utmp.h - found
> > >>>> -- Looking for include file wctype.h
> > >>>> -- Looking for include file wctype.h - found
> > >>>> -- Check if the system is big endian
> > >>>> -- Searching 16 bit integer
> > >>>> -- Looking for stddef.h
> > >>>> -- Looking for stddef.h - found
> > >>>> -- Check size of unsigned short
> > >>>> -- Check size of unsigned short - done
> > >>>> -- Using unsigned short
> > >>>> -- Check if the system is big endian - little endian
> > >>>> -- Performing Test have_mod_mask
> > >>>> -- Performing Test have_mod_mask - Success
> > >>>> -- Configuring done
> > >>>>
> > >>>> CMake Error at common/test-core/CMakeLists.txt:43 (add_library):
> > >>>>
> > >>>> Cannot find source file:
> > >>>>
>  /home/maf/src/gnucash-maint-csv-export/common/test-core/swig-unittest
> > >>>>   -
> > >>>>
> > >>>> support-guile.c
> > >>>>
> > >>>> Tried extensions .c .C .c++ .cc .cpp .cxx .m .M .mm .h .hh .h++ .hm
> > >>>> .hpp
> > >>>> .hxx .in .txx
> > >>>>
> > >>>> CMake Error at libgnucash/app-utils/CMakeLists.txt:94 (add_library):
> > >>>>
> > >>>> Cannot find source file:
> > >>>>
>  /home/maf/src/gnucash-maint-csv-export/libgnucash/app-utils/swig-app-
> > >>>>
> > >>>> utils-guile.c
> > >>>>
> > >>>> Tried extensions .c .C .c++ .cc .cpp .cxx .m .M .mm .h .hh .h++ .hm
> > >>>> .hpp
> > >>>> .hxx .in .txx
> > >>>>
> > >>>> CMake Error at libgnucash/core-utils/CMakeLists.txt:130
> (add_library):
> > >>>>
> > >>>> Cannot find source file:
> > >>>>
>  /home/maf/src/gnucash-maint-csv-export/libgnucash/core-utils/swig-cor
> > >>>>   e
> > >>>>   -
> > >>>>
> > >>>> utils-guile.c
> > >>>>
> > >>>> Tried extensions .c .C .c++ .cc .cpp .cxx .m .M .mm .h .hh .h++ .hm
> > >>>> .hpp
> > >>>> .hxx .in .txx
> > >>>>
> > >>>> CMake Error at libgnucash/engine/CMakeLists.txt:225 (add_library):
> > >>>>
> > >>>> Cannot find source file:
> > >>>>
>  /home/maf/src/gnucash-maint-csv-export/libgnucash/engine/swig-engine.
> > >>>>   c
> > >>>>
> > >>>> Tried extensions .c .C .c++ .cc .cpp .cxx .m .M .mm .h .hh .h++ .hm
> > >>>> .hpp
> > >>>> .hxx .in .txx
> > >>>>
> > >>>> CMake Error at libgnucash/gnc-module/CMakeLists.txt:21
> (add_library):
> > >>>>
> > >>>> Cannot find source file:
> > >>>>
>  /home/maf/src/gnucash-maint-csv-export/libgnucash/gnc-module/swig-gnc
> > >>>>   -
> > >>>>
> > >>>> module.c
> > >>>>
> > >>>> Tried extensions .c .C .c++ .cc .cpp .cxx .m .M .mm .h .hh .h++ .hm
> > >>>> .hpp
> > >>>> .hxx .in .txx
> > >>>>
> > >>>> CMake Error at gnucash/gnome/CMakeLists.txt:126 (add_library):
> > >>>>
> > >>>> Cannot find source file:
> > >>>>   /home/maf/src/gnucash-maint-csv-export/gnucash/gnome/swig-gnome.c
> > >>>>
> > >>>> Tried extensions .c .C .c++ .cc .cpp .cxx .m .M .mm .h .hh .h++ .hm
> > >>>> .hpp
> > >>>> .hxx .in .txx
> > >>>>
> > >>>> CMake Error at gnucash/gnome-utils/CMakeLists.txt:206 (add_library):
> > >>>>
> > >>>> Cannot find source file:
> > >>>>
>  /home/maf/src/gnucash-maint-csv-export/gnucash/gnome-utils/swig-gnome
> > >>>>   -
> > >>>>
> > >>>> utils.c
> > >>>>
> > >>>> Tried extensions .c .C .c++ .cc .cpp .cxx .m .M .mm .h .hh .h++ .hm
> > >>>> .hpp
> > >>>> .hxx .in .txx
> > >>>>
> > >>>> CMake Error at gnucash/html/CMakeLists.txt:37 (add_library):
> > >>>>
> > >>>> Cannot find source file:
> > >>>>
>  /home/maf/src/gnucash-maint-csv-export/gnucash/html/swig-gnc-html.c
> > >>>>
> > >>>> Tried extensions .c .C .c++ .cc .cpp .cxx .m .M .mm .h .hh .h++ .hm
> > >>>> .hpp
> > >>>> .hxx .in .txx
> > >>>>
> > >>>> CMake Error at gnucash/report/report-gnome/CMakeLists.txt:26
> > >
> > > (add_library):
> > >>>> Cannot find source file:
> > >>>>
>  /home/maf/src/gnucash-maint-csv-export/gnucash/report/report-gnome/sw
> > >>>>   i
> > >>>>   g-
> > >>>>
> > >>>> report-gnome.c
> > >>>>
> > >>>> Tried extensions .c .C .c++ .cc .cpp .cxx .m .M .mm .h .hh .h++ .hm
> > >>>> .hpp
> > >>>> .hxx .in .txx
> > >>>>
> > >>>> CMake Error at gnucash/report/report-system/CMakeLists.txt:18
> > >>>> (add_library): Cannot find source file:
> > >>>>
> > >>>>
> > >>>>
> /home/maf/src/gnucash-maint-csv-export/gnucash/report/report-system/swi
> > >>>> g-
> > >>>> report-system.c
> > >>>>
> > >>>> Tried extensions .c .C .c++ .cc .cpp .cxx .m .M .mm .h .hh .h++ .hm
> > >>>> .hpp
> > >>>> .hxx .in .txx
> > >>>>
> > >>>> CMake Error: CMake can not determine linker language for target:
> > >>>> test-core-
> > >>>> guile
> > >>>> CMake Error: Cannot determine link language for target
> > >>>> "test-core-guile".
> > >>>> CMake Error: CMake can not determine linker language for target:
> > >>>> gncmod-app- utils
> > >>>> CMake Error: Cannot determine link language for target
> > >>>> "gncmod-app-utils".
> > >>>> CMake Error: CMake can not determine linker language for target:
> > >>>> gnc-core-
> > >>>> utils
> > >>>> CMake Error: Cannot determine link language for target
> > >>>> "gnc-core-utils".
> > >>>> CMake Error: CMake can not determine linker language for target:
> > >>>> gncmod-engine CMake Error: Cannot determine link language for target
> > >>>> "gncmod-engine". CMake Error: CMake can not determine linker
> language
> > >>>> for
> > >>>> target: gnc-module CMake Error: Cannot determine link language for
> > >>>> target
> > >>>> "gnc-module". CMake Error: CMake can not determine linker language
> for
> > >>>> target: gnc-gnome CMake Error: Cannot determine link language for
> > >>>> target
> > >>>> "gnc-gnome". CMake Error: CMake can not determine linker language
> for
> > >>>> target: gncmod-gnome- utils
> > >>>> CMake Error: Cannot determine link language for target
> > >>>> "gncmod-gnome-utils". CMake Error: CMake can not determine linker
> > >>>> language for target:
> > >>>> gncmod-html CMake Error: Cannot determine link language for target
> > >>>> "gncmod-html". CMake Error: CMake can not determine linker language
> for
> > >>>> target: gncmod- report-gnome
> > >>>> CMake Error: Cannot determine link language for target
> > >>>> "gncmod-report-gnome". CMake Error: CMake can not determine linker
> > >>>> language
> > >>>> for target: gncmod- report-system
> > >>>> CMake Error: Cannot determine link language for target
> > >>>> "gncmod-report-system". -- Generating done
> > >>>> -- Build files have been written to: /home/maf/src/build-gc-vat
> > >>>> maf at janus:~/src/build-gc-vat>
> > >>>
> > >>> _______________________________________________
> > >>> gnucash-devel mailing list
> > >>> gnucash-devel at gnucash.org
> > >>> https://lists.gnucash.org/mailman/listinfo/gnucash-devel
> > >>
> > >> _______________________________________________
> > >> gnucash-devel mailing list
> > >> gnucash-devel at gnucash.org
> > >> https://lists.gnucash.org/mailman/listinfo/gnucash-devel
>
>
> --
> Maf. King
> PGP Key fingerprint = 8D68 A91F 733B 2C1F 43B7  2B7C E591 E8E1 0DE7 C542
>
>
>
>
>
> _______________________________________________
> gnucash-devel mailing list
> gnucash-devel at gnucash.org
> https://lists.gnucash.org/mailman/listinfo/gnucash-devel
>

More information about the gnucash-devel mailing list