[GNC-dev] segmentation fault / gnucash crashing upon using online banking actions

Christian Stimming christian at cstimming.de
Tue Oct 15 06:10:07 EDT 2019


As derek already said: you are using a system-installed gwenhywfar. You need to check at aqbanking configure time that it really chose the correct libgwenhywfar, and gnucash subsequently too.

Thanks!

Christian 

> Am 15.10.2019 um 12:00 schrieb Alex <alex at h0sta.de>:
> 
> First of all, I forgot to say I'm on Linux Debian, sorry @Martin for not mentioning!
> 
> Dear Christian,
> 
> I'm not sure if the "--enable-debug" flag changed the output of the first lines of the gdb backtrace in any way, please see below, to me they seem just the same...
> 
> Here's what I dit:
> 
> recompiled gwenhywfar:
> I did not git pull, so we are as of Oct 14th.
> $ export LANG="C"
> $ ./configure --with-guis="gtk3" --enable-debug
> 
> also recompiled aqb and gnucash.
> 
> Then ran:
> $ gdb gnucash
> (gdb) run --debug --extra
> Starting program: /usr/local/bin/gnucash --debug --extra
> [Thread debugging using libthread_db enabled]
> Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".
> [ … here's some various gnucash startup debugging outputs … ]
> 
> Gnucash is open. Empty file. I enter the aqbanking wizard straight away, "edit" the only existing user, "get certificate", OK, "Get Bank Info", Crash.
> 
> Here's the first lines of the backtrace:
> 
> Thread 1 "gnucash" received signal SIGSEGV, Segmentation fault.
> 0x00007fffd6283989 in GWEN_Text_EscapeToBuffer ()
>   from /usr/lib/x86_64-linux-gnu/libgwenhywfar.so.60
> (gdb) bt full
> #0  0x00007fffd6283989 in GWEN_Text_EscapeToBuffer ()
>    at /usr/lib/x86_64-linux-gnu/libgwenhywfar.so.60
> #1  0x00007fffba4325a3 in GWEN_ConfigMgrDir_AddGroupFileName ()
>    at /usr/lib/x86_64-linux-gnu/gwenhywfar/plugins/60/configmgr/dir.so
> #2  0x00007fffba43318e in GWEN_ConfigMgrDir_DeleteGroup ()
>    at /usr/lib/x86_64-linux-gnu/gwenhywfar/plugins/60/configmgr/dir.so
> #3  0x00007fffd6539e8c in AB_Banking_ReadConfigGroup (ab=0x555557dda620, groupName=groupName at entry=0x7fffd66b8393 "users", uniqueId=uniqueId at entry=1, doLock=doLock at entry=1, doUnlock=doUnlock at entry=0, pDb=pDb at entry=0x7fffffff70c8) at banking_cfg.c:413
>        rv = <optimized out>
>        idBuf = "\230'\aXUU\000\000\002\000\000\000\000\000\000\000\000(\aXUU", '\000' <repeats 18 times>, "Q\303\312\352\377\177\000\000\000\000\000\000\000\000\000\000\020%\217UUU\000\000 \217\225UUU\000\000\300m\377\377\377\177\000\000\377\377\377\377\377\377\377\377\357\252\312\352\377\177\000\000\000\000\000\000\000\000\000\000\030\275\024\367\377\177\000\000\377\377\377\377\377\377\377\377\000\000\000\000\000\000\000\000\002\000\000\000\000\000\000\000@\257\225UUU\000\000pn\377\377\377\177\000\000c\276\024\367\377\177\000\000pn\377\377\377\177\000\000\277\276\024\367\377\177\000\000\v\272\336\352\377\177\000\000\200\000\000\000\000\000\000\000\b\000\000\000\000\000\000\000\000"...
>        __PRETTY_FUNCTION__ = "AB_Banking_ReadConfigGroup"
> #4  0x00007fffd653d9a1 in AB_Banking_Read_UserConfig (ab=<optimized out>, uid=uid at entry=1, doLock=doLock at entry=1, doUnlock=doUnlock at entry=0, pDb=pDb at entry=0x7fffffff70c8)
>    at banking_user.c:20
>        rv = <optimized out>
> #5  0x00007fffd6552110 in AB_Provider_ReadUser (pro=pro at entry=0x555557b0a2f0, uid=uid at entry=1, doLock=doLock at entry=1, doUnlock=doUnlock at entry=0, user=user at entry=0x555557b0b900)
>    at provider_user.c:24
>        rv = <optimized out>
>        db = 0x0
>        uidInDb = <optimized out>
> #6  0x00007fffd6552b77 in AB_Provider_BeginExclUseUser (pro=0x555557b0a2f0, u=0x555557b0b900) at provider_user.c:226
>        rv = <optimized out>
>        uid = 1
> [ … and so on … ]
> 
> Please let me know if I can do anything else.
> 
> Kindly
> Alex
> 
> On Mon, 14 Oct 2019 21:51:41 +0200
> Christian Stimming <christian at cstimming.de> wrote:
> 
>> Dear Alex,
>> 
>> we're getting closer... the libaqbanking lines already have full
>> debug info, but only the libgwenhywfar do not have it. Can you
>> compile again gwenhywfar, this time with --enable-debug, so that
>> the first few lines from the backtrace (only those are important)
>> contain some more information such as the function arguments? This
>> would be a big help. Thanks!
>> 
>> Regards,
>> Christian
>> 
>> Am Montag, 14. Oktober 2019, 18:15:00 CEST schrieb Alex:
>>> Here is a backtrace of Gnucash when crashing upon clicking on
>>> "Get Bank Info" in the aqbanking wizard. Let me know if I can do
>>> anything else.
>>> 
>>> -- GDB BACKTRACE START ---
>>> 
>>> Thread 1 "gnucash" received signal SIGSEGV, Segmentation fault.
>>> 0x00007fffd6075989 in GWEN_Text_EscapeToBuffer ()
>>>   from /usr/lib/x86_64-linux-gnu/libgwenhywfar.so.60
>>> (gdb) bt full
>>> #0  0x00007fffd6075989 in GWEN_Text_EscapeToBuffer ()
>>>    at /usr/lib/x86_64-linux-gnu/libgwenhywfar.so.60
>>> #1  0x00007fffbe22d5a3 in GWEN_ConfigMgrDir_AddGroupFileName ()
>>>    at
>>> /usr/lib/x86_64-linux-gnu/gwenhywfar/plugins/60/configmgr/dir.so
>>> #2  0x00007fffbe22e18e in GWEN_ConfigMgrDir_DeleteGroup () at
>>> /usr/lib/x86_64-linux-gnu/gwenhywfar/plugins/60/configmgr/dir.so
>>> #3  0x00007fffd632be8c in AB_Banking_ReadConfigGroup
>>> (ab=0x5555582f8820, groupName=groupName at entry=0x7fffd64aa393
>>> "users", uniqueId=uniqueId at entry=1, doLock=doLock at entry=1,
>>> doUnlock=doUnlock at entry=0, pDb=pDb at entry=0x7fffffff71b8) at
>>> banking_cfg.c:413 rv = <optimized out> idBuf = "\005", '\000'
>>> <repeats 15 times>,
>>> "\001\000\000\000\000\000\000\000\000\210\221UUU\000\000\005\000\000\000\00
>>> 0\000\000\000V@\323\352\377\177\000\000\000\000\000\000\000\000\000\000X\213
>>> \221UUU\000\000pn\377\377\377\177\000\000\340!\336\367\377\177\000\000\000\2
>>> 10\221UUU\000\000\374\b\000\000\000\000\000\000\000\000\250UUU\000\000H\367\
>>> 374\325\377\177\000\000\200\033\376\325\377\177\000\000\363*\336\367\377\177
>>> \000\000\374\b\000\000\000\000\000\000\200\033\376\325\377\177\000\000\000\0
>>> 00\250UUU\000\000\030o\377\377\377\177\000\000\024o\377\377\377\177\000\000H
>>> \367\374\325\377\177\000\000=\223\060\326\377\177\000\000\360\020\060\326\37
>>> 7\177\000\000\030o\377\377\377\177\000\000"...
>>> __PRETTY_FUNCTION__ = "AB_Banking_ReadConfigGroup" #4
>>> 0x00007fffd632f9a1 in AB_Banking_Read_UserConfig (ab=<optimized
>>> out>, uid=uid at entry=1, doLock=doLock at entry=1,
>>> out>doUnlock=doUnlock at entry=0, pDb=pDb at entry=0x7fffffff71b8) at
>>> out>banking_user.c:20
>>>        rv = <optimized out>
>>> #5  0x00007fffd6344110 in AB_Provider_ReadUser
>>> (pro=pro at entry=0x5555559d8d20, uid=uid at entry=1,
>>> doLock=doLock at entry=1, doUnlock=doUnlock at entry=0,
>>> user=user at entry=0x5555585e9720) at provider_user.c:24
>>>        rv = <optimized out>
>>>        db = 0x0
>>>        uidInDb = <optimized out>  
>> 
>> 
>> 
> 
> 
> -- 



More information about the gnucash-devel mailing list