make problems on solaris8 (here we go again...)
Gerlich, Rene
Rene.Gerlich at commerzbank.com
Thu Jul 3 17:00:00 CDT 2003
hi derek,
i'll downgrade no problem.
here are lines 43-48:
43: #ifdef __STDC__
44: extern char *dcgettext(const char *, const char *, const int);
45: extern char *dgettext(const char *, const char *);
46: extern char *gettext(const char *);
47: extern char *textdomain(const char *);
48: extern char *bindtextdomain(const char *, const char *);
i have checked for gettext and i use version 0.11.5 in /usr/local/bin (if
that's what this means ...)
cheers
rene
> -----Original Message-----
> From: Derek Atkins [mailto:warlord at MIT.EDU]
> Sent: Thursday, July 03, 2003 3:55 PM
> To: Gerlich, Rene
> Cc: gnucash-user at lists.gnucash.org
> Subject: Re: make problems on solaris8 (here we go again...)
>
>
> I will note that this very much be a GCC 3.3 problem and not a GnuCash
> problem. Just like DBD 4.1, GCC 3.3 is "just too new" for our code.
> Is there any chance you could downgrade your GCC to 3.2?
>
> >
> /usr/local/lib/gcc-lib/sparc-sun-solaris2.8/3.3/include/libint
> l.h:46: error:
> > parse error before "const"
>
> So, what is at (or around) line 46 in this file? Can you supply lines
> 44-47? I suspect there is a missing include file, but I'm not sure
> what. I've compiled with gcc3.0 and gcc3.2 on solaris 5.8
> and 5.9 without
> this problem..
>
> -derek
>
> "Gerlich, Rene" <Rene.Gerlich at commerzbank.com> writes:
>
> > hi derek,
> >
> > of course you are right, i was not using gnu make. well i
> am now and it
> > walks throu almost all the way!
> >
> > here's another little problem i can't help myself out with:
> >
> > make[5]: Entering directory
> >
> `/export/download/gnucash/gnucash-1.8.4/src/business/business-ledger'
> > /bin/sh ../../../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I.
> > -I../../.. -I/usr/local/BerkeleyDB.4.1/include
> -I/opt/gnome/include
> > -I/opt/gnome/include -I../../../src/business/business-core
> > -I../../../src/business/business-utils
> > -I../../../src/business/dialog-tax-table -I../../../src
> > -I../../../src/engine -I../../../src/gnc-module
> -I../../../src/app-utils
> > -I../../../src/gnome-utils -I../../../src/register/register-core
> > -I/opt/gnome/include -I/opt/gnome/include/gnome-xml
> > -I/opt/gnome/include/libglade-1.0 -I/opt/gnome/include/gtk-1.2
> > -I/opt/gnome/include/glib-1.2 -I/opt/gnome/lib/glib/include
> > -I/usr/openwin/include -I/opt/gnome/include/gtk-1.2
> > -I/opt/gnome/include/glib-1.2 -I/opt/gnome/lib/glib/include
> > -I/usr/openwin/include -I/opt/gnome/include/gnome-1.0
> -DNEED_GNOMESUPPORT_H
> > -I/opt/gnome/lib/gnome-libs/include -I/opt/gnome/include/orbit-1.0
> > -I/opt/gnome/include/glib-1.2 -I/opt/gnome/lib/glib/include
> -g -O2 -Wall
> > -Wunused -c gncEntryLedgerModel.c
> > gcc -DHAVE_CONFIG_H -I. -I. -I../../..
> -I/usr/local/BerkeleyDB.4.1/include
> > -I/opt/gnome/include -I/opt/gnome/include
> > -I../../../src/business/business-core
> -I../../../src/business/business-utils
> > -I../../../src/business/dialog-tax-table -I../../../src
> > -I../../../src/engine -I../../../src/gnc-module
> -I../../../src/app-utils
> > -I../../../src/gnome-utils -I../../../src/register/register-core
> > -I/opt/gnome/include -I/opt/gnome/include/gnome-xml
> > -I/opt/gnome/include/libglade-1.0 -I/opt/gnome/include/gtk-1.2
> > -I/opt/gnome/include/glib-1.2 -I/opt/gnome/lib/glib/include
> > -I/usr/openwin/include -I/opt/gnome/include/gtk-1.2
> > -I/opt/gnome/include/glib-1.2 -I/opt/gnome/lib/glib/include
> > -I/usr/openwin/include -I/opt/gnome/include/gnome-1.0
> -DNEED_GNOMESUPPORT_H
> > -I/opt/gnome/lib/gnome-libs/include -I/opt/gnome/include/orbit-1.0
> > -I/opt/gnome/include/glib-1.2 -I/opt/gnome/lib/glib/include
> -g -O2 -Wall
> > -Wunused -c gncEntryLedgerModel.c -fPIC -o
> .libs/gncEntryLedgerModel.o
> > In file included from /usr/include/locale.h:51,
> > from ../../../src/app-utils/gnc-ui-util.h:36,
> > from gncEntryLedgerModel.c:15:
> >
> /usr/local/lib/gcc-lib/sparc-sun-solaris2.8/3.3/include/libint
> l.h:46: error:
> > parse error before "const"
> > make[5]: *** [gncEntryLedgerModel.lo] Error 1
> > make[5]: Leaving directory
> >
> `/export/download/gnucash/gnucash-1.8.4/src/business/business-ledger'
> >
> > i have looked at libintl.h which is part of my (and
> probably everyones ;-)
> > gcc 3.3 installation and i found it is probably related to
> gettext and my
> > locale which is standard LANG=C but again if i knew what i
> was talking
> > about, i would not bother you...
> >
> > looks like i am almost through though. i wonder if i'll be
> able to reproduce
> > what i have done to make this compilation work ;-) i'll set
> up a naked
> > solaris next time and document more of what i'm doing.
> >
> > cheers
> >
> > rene
> >
> >
> > > -----Original Message-----
> > > From: Derek Atkins [mailto:warlord at MIT.EDU]
> > > Sent: Wednesday, July 02, 2003 5:37 PM
> > > To: Gerlich, Rene
> > > Cc: gnucash-user at lists.gnucash.org
> > > Subject: Re: make problems on solaris8 (here we go again...)
> > >
> > >
> > > Are you using Gnu Make? If not, well, you need to ;)
> > > If you ARE using Gnu Make, then I'd like to see your
> > > "examples/Makefile".
> > >
> > > -derek
> > >
> > > "Gerlich, Rene" <Rene.Gerlich at commerzbank.com> writes:
> > >
> > > > cheers everyone!
> > > >
> > > > well, finally the ./configure on my solaris8 box works!
> > > thanks to derek!
> > > >
> > > > now the bugger hangs during make (see below)
> > > >
> > > > make all-recursive
> > > > Making all in intl
> > > > Making all in m4
> > > > Making all in macros
> > > > Making all in debian
> > > > Making all in doc
> > > > Making all in examples
> > > > rm -f gnc-prices.1.tmp
> > > > sed < > gnc-prices.1.tmp \
> > > > -e 's:@-VERSION-@:1.8.4:g' \
> > > > -e 's:@-DATE-@::g'
> > > > sh: syntax error at line 1: `>' unexpected
> > > > *** Error code 2
> > > > make: Fatal error: Command failed for target `gnc-prices.1'
> > > > Current working directory
> /export/download/gnucash/gnucash-1.8.4/doc
> > > > *** Error code 1
> > > > make: Fatal error: Command failed for target `all-recursive'
> > > > Current working directory
> /export/download/gnucash/gnucash-1.8.4/doc
> > > > *** Error code 1
> > > > make: Fatal error: Command failed for target `all-recursive'
> > > > Current working directory /export/download/gnucash/gnucash-1.8.4
> > > > *** Error code 1
> > > > make: Fatal error: Command failed for target `all-recursive-am'
> > > >
> > > > i have enabled --disable-error-on-warning so it won't exit
> > > right away (maybe
> > > > not so smart?)
> > > >
> > > > i would be very thankful if anyone (maybe derek ;-) knows a
> > > way out here. if
> > > > you need more data (configure output, make output,
> > > environment, ...) please
> > > > let me know
> > > >
> > > > cheers
> > > >
> > > > rene
> > > >
> > > > _______________________________________________
> > > > gnucash-user mailing list
> > > > gnucash-user at lists.gnucash.org
> > > > https://lists.gnucash.org/mailman/listinfo/gnucash-user
> > >
> > > --
> > > Derek Atkins, SB '93 MIT EE, SM '95 MIT Media Laboratory
> > > Member, MIT Student Information Processing Board (SIPB)
> > > URL: http://web.mit.edu/warlord/ PP-ASEL-IA N1NWH
> > > warlord at MIT.EDU PGP key available
> > >
> > _______________________________________________
> > gnucash-user mailing list
> > gnucash-user at lists.gnucash.org
> > https://lists.gnucash.org/mailman/listinfo/gnucash-user
>
> --
> Derek Atkins, SB '93 MIT EE, SM '95 MIT Media Laboratory
> Member, MIT Student Information Processing Board (SIPB)
> URL: http://web.mit.edu/warlord/ PP-ASEL-IA N1NWH
> warlord at MIT.EDU PGP key available
> _______________________________________________
> gnucash-user mailing list
> gnucash-user at lists.gnucash.org
> https://lists.gnucash.org/mailman/listinfo/gnucash-user
>
More information about the gnucash-user
mailing list