[MAINT] Network Work on Code Sunday, Oct 1, 1-4pm EDT

[GWB]

Derek,

Sorry to hear that, and its frustrating.  Perhaps AT&T could, in the
meantime, install a different modem temporarily to see if that solves
the problem?  I've been through this with various T line providers,
and their default response is often "Something you did", even when the
internal set up has not changed in years.  Not all of them do this,
but the repair techs are sometimes tied by their instructions from on
high.

Gordon

On Mon, Oct 2, 2017 at 12:28 PM, David Carlson
<david.carlson.417 at gmail.com> wrote:
> That might be difficult, as it may be a loose connector or even corrosion
> inside a cable or connector or component in a power supply or ???
>
> Good luck.
>
> David C
>
> On Oct 2, 2017 10:42 AM, "Derek Atkins" <warlord at mit.edu> wrote:
>
>> Hi,
>>
>> Just a quick follow-up.
>>
>> AT&T did come, and with their help we debugged the network only to
>> discover that it's something inside my network that is causing their
>> modem to go all futzy.
>>
>> I'm now in the process of trying to debug further, but it's going to
>> take time.  Expect further interuptions until I can isolate the issue.
>>
>> -derek
>>
>> Derek Atkins <warlord at MIT.EDU> writes:
>>
>> > Hi,
>> >
>> > tl;dr:  AT&T is coming to fix some network issues tomorrow, Sunday,
>> > between 1-4pm EDT; service can last up to 2 hours and may involve
>> > several network outages.
>> >
>> > LONG VERSION:
>> >
>> > As some of you may have noticed, there have been some network issues to
>> > code which started just over a week ago.  One of the downsides was
>> > significant packet loss and gncbot disappearing from IRC.  Alas, I had
>> > been out of the country while this was happening and couldn't start to
>> > really look into it; I restarted gncbot several times while I was away
>> > but due to the persistent network issues it regularly would lost
>> > contact.
>> >
>> > I'm seeing anywhere from 20-40% packet loss and ping times to my
>> > immediate router anywhere from 200-1000ms (whereas it's usually 3-4ms).
>> > I called AT&T, my ISP, and they are sending a tech tomorrow, Sunday,
>> > October 1, between 1-4pm EDT.  The maintenance could potentially take 2
>> > hours once they arrive, but of course it all depends on what the issue
>> > is.
>> >
>> > This will affect code, lists, and wiki services including email, gncbot,
>> > etc.
>> >
>> > I'll attempt to keep people informed over IRC, assuming of course that I
>> > can get online prior to the work being done.
>> >
>> > Please let me know if you have any questions.
>> >
>> > -derek
>>
>> --
>>        Derek Atkins, SB '93 MIT EE, SM '95 MIT Media Laboratory
>>        Member, MIT Student Information Processing Board  (SIPB)
>>        URL: http://web.mit.edu/warlord/    PP-ASEL-IA     N1NWH
>>        warlord at MIT.EDU                        PGP key available
>> _______________________________________________
>> gnucash-user mailing list
>> gnucash-user at gnucash.org
>> https://lists.gnucash.org/mailman/listinfo/gnucash-user
>> -----
>> Please remember to CC this list on all your replies.
>> You can do this by using Reply-To-List or Reply-All.
>>
> _______________________________________________
> gnucash-user mailing list
> gnucash-user at gnucash.org
> https://lists.gnucash.org/mailman/listinfo/gnucash-user
> -----
> Please remember to CC this list on all your replies.
> You can do this by using Reply-To-List or Reply-All.