[GNC] Compiling 2.6.12
Geert Janssens
geert.gnucash at kobaltwit.be
Fri Aug 31 18:14:29 EDT 2018
No, I meant libglib2.0-dev (I had a dash too much in my reply). And in fact
that's also what's on the wiki page Stephen pointed you at. Did you read that
page and follow the instructions ?
Regards,
Geert
Op vrijdag 31 augustus 2018 23:25:39 CEST schreef Paul Schwartz:
> apt complains that it can't find libglib-2.0-dev. Did you mean
> glib-2.0-dev? That was installed.
> Going to try a reboot just in case.
>
> Paul
>
> On Fri, Aug 31, 2018 at 1:11 PM Stephen M. Butler <kg7je at arrl.net> wrote:
> > First -- be sure to cc the user group (gnucash-user at gnucash.org) so that
> > others can jump in and help.
> >
> > Second -- I presume you have looked at this page
> > https://wiki.gnucash.org/wiki/BuildUbuntu16.04
> >
> > It has the entire list for building on 18.04. I know it says 16.04
> >
> > but it also works for 18.04
> >
> > Third -- you are aware that 2.6.19 is available for 18.04 from the
> > packaged libraries. That would have several bug fixes. In addition,
> > you could pull down 2.6.21 (as Geert suggested) and get even more fixes.
> >
> > <<and then, why not jump to 3.2--some fix level? I pulled from the
> >
> > git library a couple weeks back to get some fixes for 3.2 and am happy.
> > Sounds like some more fixes were added in the last few days>>
> >
> >
> >
> > On 08/31/2018 11:07 AM, Paul Schwartz wrote:O
> >
> > > Very long message
> > > Package glib-2.0 was not found in the pkg-config search path. Perhaps
> > > you should add the directory containing `glib-2.0.pc' to the
> > > PKG_CONFIG_PATH environment variable No package 'glib-2.0' found
> > > Package gio-2.0 was not found in the pkg-config search path. Perhaps
> > > you should add the directory containing `gio-2.0.pc' to the
> > > PKG_CONFIG_PATH environment variable No package 'gio-2.0' found
> > > Package gthread-2.0 was not found in the pkg-config search path.
> > > Perhaps you should add the directory containing `gthread-2.0.pc' to
> > > the PKG_CONFIG_PATH environment variable No package 'gthread-2.0'
> > > found Package gobject-2.0 was not found in the pkg-config search path.
> > > Perhaps you should add the directory containing `gobject-2.0.pc' to
> > > the PKG_CONFIG_PATH environment variable No package 'gobject-2.0'
> > > found Package gmodule-2.0 was not found in the pkg-config search path.
> > > Perhaps you should add the directory containing `gmodule-2.0.pc' to
> > > the PKG_CONFIG_PATH environment variable No package 'gmodule-2.0' found
> > > configure: error: Library requirements (glib-2.0 >= 2.28 gio-2.0 >=
> > > 2.25 gthread-2.0 gobject-2.0 gmodule-2.0) not met; consider adjusting
> > > the PKG_CONFIG_PATH environment variable if your libraries are in a
> > > nonstandard prefix so pkg-config can find them.
> > >
> > > When you installed glib did you remove anything?
> > >
> > > Paul
> >
> > There was something funky on my machine and I did have to clean up some
> > items.
> > I searched my sent folder and found that gtest and gmock on my system
> > were very old.
> > You may need to remove them and then forcibly remove the two folders
> > /usr/src/gtest and /usr/src/gmock and then add them back:
> >
> > sudo apt-get install googletest
> > sudo apt-get install googlemock
> > sudo apt-get install libgtest-dev
> >
> > > On Fri, Aug 31, 2018 at 11:48 AM Stephen M. Butler <kg7je at arrl.net
> > >
> > > <mailto:kg7je at arrl.net>> wrote:
> > > On 08/31/2018 10:36 AM, Paul Schwartz wrote:
> > > > I have been trying to compile 2.6.12 on Ubuntu 18.04. I have not
> > >
> > > been able
> > >
> > > > to get past the recognition of glib-2.0 in configure. I have
> > >
> > > installed
> > >
> > > > glib-2.0 and glib-2.0-dev with apt. I have tried setting
> > >
> > > PKG_CONFIG_PATH
> > >
> > > > to /usr/share before running
> > >
> > > conhttps://wiki.gnucash.org/wiki/BuildUbuntu16.04figure. Nothing
> > > seems to work. Some
> > >
> > > > suggestions would be appreciated.
> > > >
> > > > Paul
> > >
> > > What error messages do you get? I was compiling 3.1 and 3.2 on
> >
> > Ubuntu
> >
> > > 18.04 and had to load the generic glib and let 18.04 figure out
> > > which
> > > one to install.
> > >
> > >
> > > --
> > > Stephen M Butler, PMP, PSM
> > > Stephen.M.Butler51 at gmail.com <mailto:Stephen.M.Butler51 at gmail.com>
> > > kg7je at arrl.net <mailto:kg7je at arrl.net>
> > > 253-350-0166
> > > -------------------------------------------
> > > GnuPG Fingerprint: 8A25 9726 D439 758D D846 E5D4 282A 5477 0385
> > > 81D8
> > >
> > > _______________________________________________
> > > gnucash-user mailing list
> > > gnucash-user at gnucash.org <mailto:gnucash-user at gnucash.org>
> > > To update your subscription preferences or to unsubscribe:
> > > https://lists.gnucash.org/mailman/listinfo/gnucash-user
> > > If you are using Nabble or Gmane, please see
> > > https://wiki.gnucash.org/wiki/Mailing_Lists for more information.
> > > -----
> > > Please remember to CC this list on all your replies.
> > > You can do this by using Reply-To-List or Reply-All.
> >
> > --
> > Stephen M Butler, PMP, PSM
> > Stephen.M.Butler51 at gmail.com
> > kg7je at arrl.net
> > 253-350-0166
> > -------------------------------------------
> > GnuPG Fingerprint: 8A25 9726 D439 758D D846 E5D4 282A 5477 0385 81D8
> >
> > _______________________________________________
> > gnucash-user mailing list
> > gnucash-user at gnucash.org
> > To update your subscription preferences or to unsubscribe:
> > https://lists.gnucash.org/mailman/listinfo/gnucash-user
> > If you are using Nabble or Gmane, please see
> > https://wiki.gnucash.org/wiki/Mailing_Lists for more information.
> > -----
> > Please remember to CC this list on all your replies.
> > You can do this by using Reply-To-List or Reply-All.
>
> _______________________________________________
> gnucash-user mailing list
> gnucash-user at gnucash.org
> To update your subscription preferences or to unsubscribe:
> https://lists.gnucash.org/mailman/listinfo/gnucash-user
> If you are using Nabble or Gmane, please see
> https://wiki.gnucash.org/wiki/Mailing_Lists for more information. -----
> Please remember to CC this list on all your replies.
> You can do this by using Reply-To-List or Reply-All.
More information about the gnucash-user
mailing list