[GNC] new v3.0 install Ubuntu 18.04 LTS

[Di Mang]

​
Hi all,

I've re-set up my notebook this weekend because my hard drive was broken.
The list of needed packages in Wiki for the Debian system is currently
obsolete and I was looking for relevant packages.
The list of packages from Dennis is correct, except of two packages: swig
and libaqbanking-dev (for AQBANKING).

sudo apt-get install cmake
sudo apt-get install libtool libltdl-dev
sudo apt-get install libglib2.0-dev
sudo apt-get install icu-devtools libicu-dev
sudo apt-get install libboost-all-dev
sudo apt-get install guile-2.0 guile-2.0-dev
sudo apt-get install swig
sudo apt-get install libxml++2.6-dev
sudo apt-get install libxslt1-dev
sudo apt-get install xsltproc
sudo apt-get install libgtest-dev
sudo apt-get install google-mock
sudo apt-get install gtk+3.0
sudo apt-get install libgtk-3-dev
sudo apt-get install libwebkit2gtk-4.0-37sudo apt-get install
libwebkit2gtk-4.0-dev
sudo apt-get install libdbi-dev
sudo apt-get install libaqbanking-dev

Can someone please update the wiki page? I don't have access to it.
https://wiki.gnucash.org/wiki/Building#Debian

Thanks,
dimang



2018-04-28 16:33 GMT+02:00 Dennis Powless <claven123 at gmail.com>:

> I just installed ubuntu 18.04 LTS on my dual boot machine.  I want to
> install v 3.0 and the new ubuntu only has 2.6.19 in the software center.
> What is the best method to get v3.0 installed instead of the older version?
>
> I see instructions here....
> https://wiki.gnucash.org/wiki/Building
>
> And scrolled down I see these instructions.....  I'm assuming this will
> work for 18.04LTS?
> Ubuntu 16.04 LTS (Xenial Xerus)
>
> To build Gnucash 3.0 from source you need to install following packages:
>
> sudo apt-get install cmake
> sudo apt-get install libtool libltdl-dev
> sudo apt-get install libglib2.0-dev
> sudo apt-get install icu-devtools libicu-dev
> sudo apt-get install libboost-all-dev
> sudo apt-get install guile-2.0 guile-2.0-dev
> sudo apt-get install swig2.0
> sudo apt-get install libxml++2.6-dev
> sudo apt-get install libxslt1-dev
> sudo apt-get install xsltproc
> sudo apt-get install libgtest-dev
> sudo apt-get install google-mock
> sudo apt-get install gtk+3.0
> sudo apt-get install libgtk-3-dev
> sudo apt-get install libwebkit2gtk-4.0-37
> sudo apt-get install libwebkit2gtk-4.0-dev
> sudo apt-get install libdbi-dev
>
> mkdir build-cmakecd build-cmake
> cmake -D CMAKE_INSTALL_PREFIX=<target>/gnucash-cmake -D
> WITH_AQBANKING=OFF -D WITH_OFX=OFF ../gnucash
> make
> sudo make install
>
>
> I'm assuming I would then change the <target> with the downloaded gnucash
> file, right?
>
> Dennis
> _______________________________________________
> gnucash-user mailing list
> gnucash-user at gnucash.org
> To update your subscription preferences or to unsubscribe:
> https://lists.gnucash.org/mailman/listinfo/gnucash-user
> If you are using Nabble or Gmane, please see
> https://wiki.gnucash.org/wiki/Mailing_Lists for more information.
> -----
> Please remember to CC this list on all your replies.
> You can do this by using Reply-To-List or Reply-All.
>