[GNC] Scheduled Trans shows completed 5/8 but not in register?

Mon May 20 09:35:01 EDT 2019

For many years it has been my SOP to scroll through the SLR transaction
list, count the number of transactions that I expect to appear, change some
reminders to ToCreate, and set the Show created flag before triggering.

In the last 3 or 4 years I have never had one fail to appear.

David Carlson

On Mon, May 20, 2019, 8:18 AM Jack Lockard <JELockard at outlook.com> wrote:

> I have found this same behavior. I either go on to entering a necessary
> manual transaction or closing and reopening the account and then the
> scheduled transaction shows up. For whatever reason, when a scheduled
> transaction is processed, the account register is not refreshed to have the
> transaction appear.
>
> Jack
>
> -----Original Message-----
> From: gnucash-user <gnucash-user-bounces+jelockard=outlook.com at gnucash.org>
> On Behalf Of Jack Slater
> Sent: Monday, May 20, 2019 7:59 AM
> To: David Carlson <david.carlson.417 at gmail.com>
> Cc: Gnucash Users <gnucash-user at gnucash.org>
> Subject: Re: [GNC] Scheduled Trans shows completed 5/8 but not in register?
>
> OK - Idiot alert here!  When I did a search for the transaction in the
> Expense account - I spotted the "missing" transaction - date
> 05/08/2018......NOT 2019! Of course the 2019 transaction is the item that
> did not post. So now I'm telling you - via a red face - that the
> transaction appears in neither account! So I'm back to square one. Shows
> complete in the Scheduled Trans list but doe not appear anywhere else.
> Sorry for the misleading "clue".
>
> On Sun, May 19, 2019 at 3:55 PM David Carlson <david.carlson.417 at gmail.com
> >
> wrote:
>
> > ...and if you click on Jump to.. with the curser in that account line,
> > where does it go?
> >
> >
> > David Carson
> >
> > On Sun, May 19, 2019 at 3:51 PM Colin Law <clanlaw at gmail.com> wrote:
> >
> >> So in the Expense account ledger what is on the other side of the
> >> transaction?
> >>
> >> Colin
> >>
> >> On Sun, 19 May 2019 at 20:27, Jack Slater <theilliniguy at gmail.com>
> wrote:
> >> >
> >> > No. Sorry. The Sched Trans is a charge against a Visa account with
> >> > the
> >> 2nd entry against Expense:Entertainment.  Its missing in the Visa
> >> account ledger but is listed in the Expense account ledger.
> >> >
> >> > On Sun, May 19, 2019 at 2:21 PM Colin Law <clanlaw at gmail.com> wrote:
> >> >>
> >> >> I am confused in that case.  Are you saying that the transaction
> >> >> shows the correct two accounts in one register, but does not
> >> >> appear at all in the other?  If so then is the date correct?  If
> >> >> so then open the account where it does not show and click View >
> >> >> Filter By and check that Date is set to Show All and that all the
> >> >> boxes are ticked on the Status tab.
> >> >>
> >> >> Colin
> >> >>
> >> >> On Sun, 19 May 2019 at 16:54, Jack Slater <theilliniguy at gmail.com>
> >> wrote:
> >> >> >
> >> >> > the correct expense account.
> >> >> >
> >> >> > On Sun, May 19, 2019 at 10:52 AM Colin Law <clanlaw at gmail.com>
> >> wrote:
> >> >> >>
> >> >> >> On Sun, 19 May 2019 at 16:48, Jack Slater
> >> >> >> <theilliniguy at gmail.com>
> >> wrote:
> >> >> >> >
> >> >> >> > It DOES show up on the "other side"! How would that happen
> >> >> >> > and
> >> what is the
> >> >> >> > correct way to fix it?
> >> >> >>
> >> >> >> When looking at the other side what account is it referencing
> >> >> >> on
> >> *its*
> >> >> >>  other side if you see what I mean.
> >> >> >>
> >> >> >> Colin
> >> >> >>
> >> >> >> >
> >> >> >> > Version 3.5 - Build of 3/30/19
> >> >> >> >
> >> >> >> > On Sat, May 18, 2019 at 3:15 PM Maf. King <maf at chilwell.net>
> >> wrote:
> >> >> >> >
> >> >> >> > > On Saturday, 18 May 2019 20:12:02 BST David Carlson wrote:
> >> >> >> > > > Yes, it would be useful to know if you are using release
> >> >> >> > > > 3.5
> >> or close.
> >> >> >> > > > Also, if you recall any unusual circumstance during or
> >> immediately after
> >> >> >> > > > that SX session.
> >> >> >> > > >
> >> >> >> > > > I think the only work-around would be to find the
> >> >> >> > > > previous
> >> transaction
> >> >> >> > > > entry and copy it or force another entry by adjusting the
> >> >> >> > > > SX
> >> settings.
> >> >> >> > > >
> >> >> >> > > > On Sat, May 18, 2019 at 12:47 PM Jack Slater <
> >> theilliniguy at gmail.com>
> >> >> >> > > wrote:
> >> >> >> > > > > I closed both register window and GC but scheduled
> >> transaction (showing
> >> >> >> > > > > last occur 5/8) is not found.  Must be a bug! Anything
> >> >> >> > > > > else
> >> I can tell
> >> >> >> > > > > you?
> >> >> >> > > >
> >> >> >> > >
> >> >> >> > > Does the missing txn show up on the "other side" account eg
> >> expenses
> >> >> >> > > rather
> >> >> >> > > than the eg. bank account?
> >> >> >> > >
> >> >> >> > > Otherwise, as David suggests, you might have to re-create
> >> >> >> > > it
> >> manually.
> >> >> >> > >
> >> >> >> > > Odd.
> >> >> >> > > Maf.
> >> >> >> > >
> >> >> >> > >
> >> >> >> > >
> >> >> >> > >
> >> >> >> > >
> >> >> >> > >
> >> >> >> > _______________________________________________
> >> >> >> > gnucash-user mailing list
> >> >> >> > gnucash-user at gnucash.org
> >> >> >> > To update your subscription preferences or to unsubscribe:
> >> >> >> > https://eur02.safelinks.protection.outlook.com/?url=https%3A%
> >> >> >> > 2F%2Flists.gnucash.org%2Fmailman%2Flistinfo%2Fgnucash-user&am
> >> >> >> > p;data=02%7C01%7C%7C842fd90c47d84e33066008d6dd1ac95c%7C84df9e
> >> >> >> > 7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636939504452128289&s
> >> >> >> > data=thkmzrsDtdb9WwJ%2FsHJWJAmJf9IF%2FOxbVpe64LU%2B6G8%3D&amp
> >> >> >> > ;reserved=0 If you are using Nabble or Gmane, please see
> >>
> https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwiki.gnucash.org%2Fwiki%2FMailing_Lists&data=02%7C01%7C%7C842fd90c47d84e33066008d6dd1ac95c%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636939504452138306&sdata=QkCCv%2FcQTBlkOYUWqHMXaCkbaN2KmcfeqHikzwvWV3Y%3D&reserved=0
> for more information.
> >> >> >> > -----
> >> >> >> > Please remember to CC this list on all your replies.
> >> >> >> > You can do this by using Reply-To-List or Reply-All.
> >> _______________________________________________
> >> gnucash-user mailing list
> >> gnucash-user at gnucash.org
> >> To update your subscription preferences or to unsubscribe:
> >> https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Flis
> >> ts.gnucash.org%2Fmailman%2Flistinfo%2Fgnucash-user&data=02%7C01%7
> >> C%7C842fd90c47d84e33066008d6dd1ac95c%7C84df9e7fe9f640afb435aaaaaaaaaa
> >> aa%7C1%7C0%7C636939504452138306&sdata=WAbB%2B%2BxMS03nV2I5SrVGfL2
> >> vJBnV8EXY3LPJwcy39HM%3D&reserved=0
> >> If you are using Nabble or Gmane, please see
> >>
> https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwiki.gnucash.org%2Fwiki%2FMailing_Lists&data=02%7C01%7C%7C842fd90c47d84e33066008d6dd1ac95c%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636939504452138306&sdata=QkCCv%2FcQTBlkOYUWqHMXaCkbaN2KmcfeqHikzwvWV3Y%3D&reserved=0
> for more information.
> >> -----
> >> Please remember to CC this list on all your replies.
> >> You can do this by using Reply-To-List or Reply-All.
> >>
> >
> >
> > --
> > David Carlson
> >
> _______________________________________________
> gnucash-user mailing list
> gnucash-user at gnucash.org
> To update your subscription preferences or to unsubscribe:
>
> https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.gnucash.org%2Fmailman%2Flistinfo%2Fgnucash-user&data=02%7C01%7C%7C842fd90c47d84e33066008d6dd1ac95c%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636939504452138306&sdata=WAbB%2B%2BxMS03nV2I5SrVGfL2vJBnV8EXY3LPJwcy39HM%3D&reserved=0
> If you are using Nabble or Gmane, please see
> https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwiki.gnucash.org%2Fwiki%2FMailing_Lists&data=02%7C01%7C%7C842fd90c47d84e33066008d6dd1ac95c%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636939504452148311&sdata=IwhupAIkPdPr6Yiarsi9hyabSNzXf0kaWodHUX6vwFs%3D&reserved=0
> for more information.
> -----
> Please remember to CC this list on all your replies.
> You can do this by using Reply-To-List or Reply-All.
>