[GNC] Finance::Quote on Mac M1

Peter West pbw at pbw.id.au
Wed Aug 4 04:38:32 EDT 2021


It sill reports the same failure, even though I run
sudo cpan -f -i B::Keywords


—
Peter West
pbw at ehealth.id.au
But immediately Jesus spoke to them, saying, “Take heart; it is I. Do not be afraid.”

> On 4 Aug 2021, at 5:53 pm, Geoff <cleanoutmyshed at gmail.com> wrote:
> 
> Try and force the installation of B::Keywords:
> 
> cpan> force install B::Keywords
> 
> From: https://www.thegeekstuff.com/2013/06/cpan-force-install-perl-module/
> 
> If that works, try to reinstall Finance::Quote normally.
> 
> Fingers crossed.
> 
> Geoff
> =====
> 
> On 4/08/2021 5:24 pm, Peter West wrote:
>> Here’s the output.
>> Rosie:.30/darwin-thread-multi-2level 16:53:50$ sudo cpan -i Finance::Quote
>> Password:
>> Loading internal logger. Log::Log4perl recommended for better logging
>> CPAN::SQLite not installed, trying to work without
>> Reading '/Users/pbw/.cpan/sources/authors/01mailrc.txt.gz'
>> ............................................................................DONE
>> Reading '/Users/pbw/.cpan/sources/modules/02packages.details.txt.gz'
>>   Database was generated on Wed, 04 Aug 2021 04:17:03 GMT
>> .............
>>   New CPAN.pm version (v2.28) available.
>>   [Currently running version is v2.22]
>>   You might want to try
>>     install CPAN
>>     reload cpan
>>   to both upgrade CPAN.pm and run the new version without leaving
>>   the current session.
>> ...............................................................DONE
>> Reading '/Users/pbw/.cpan/sources/modules/03modlist.data.gz'
>> DONE
>> Running install for module 'Finance::Quote'
>>   CPAN: Module::Signature security checks disabled because Module::Signature
>>   not installed.  Please consider installing the Module::Signature module.
>>   You may also need to be able to connect over the Internet to the public
>>   key servers like pool.sks-keyservers.net or pgp.mit.edu.
>> Checksum for /Users/pbw/.cpan/sources/authors/id/B/BP/BPSCHUCK/Finance-Quote-1.51.tar.gz ok
>> Configuring B/BP/BPSCHUCK/Finance-Quote-1.51.tar.gz with Makefile.PL
>> CPAN::Reporter not installed.  No reports will be sent.
>> Checking if your kit is complete...
>> Looks good
>> Warning: prerequisite Test::Perl::Critic 0 not found.
>> Generating a Unix-style Makefile
>> Writing Makefile for Finance::Quote
>> Writing MYMETA.yml and MYMETA.json
>>   BPSCHUCK/Finance-Quote-1.51.tar.gz
>>   /usr/bin/perl Makefile.PL -- OK
>> Running make for B/BP/BPSCHUCK/Finance-Quote-1.51.tar.gz
>> ---- Unsatisfied dependencies detected during ----
>> ----    BPSCHUCK/Finance-Quote-1.51.tar.gz    ----
>>     Test::Perl::Critic [build_requires]
>> Running install for module 'Test::Perl::Critic'
>> Checksum for /Users/pbw/.cpan/sources/authors/id/P/PE/PETDANCE/Test-Perl-Critic-1.04.tar.gz ok
>> Configuring P/PE/PETDANCE/Test-Perl-Critic-1.04.tar.gz with Build.PL
>> Checking prerequisites...
>>   requires:
>>     !  Perl::Critic is not installed
>>     !  Perl::Critic::Utils is not installed
>>     !  Perl::Critic::Violation is not installed
>> ERRORS/WARNINGS FOUND IN PREREQUISITES.  You may wish to install the versions
>> of the modules indicated above before proceeding with this installation
>> Created MYMETA.yml and MYMETA.json
>> Creating new 'Build' script for 'Test-Perl-Critic' version '1.04'
>>   PETDANCE/Test-Perl-Critic-1.04.tar.gz
>>   /usr/bin/perl Build.PL -- OK
>> Running Build for P/PE/PETDANCE/Test-Perl-Critic-1.04.tar.gz
>> ---- Unsatisfied dependencies detected during ----
>> ----   PETDANCE/Test-Perl-Critic-1.04.tar.gz  ----
>>     Perl::Critic [requires]
>>     Perl::Critic::Utils [requires]
>>     Perl::Critic::Violation [requires]
>> Running install for module 'Perl::Critic'
>> Checksum for /Users/pbw/.cpan/sources/authors/id/P/PE/PETDANCE/Perl-Critic-1.140.tar.gz ok
>> Configuring P/PE/PETDANCE/Perl-Critic-1.140.tar.gz with Build.PL
>> Checking prerequisites...
>>   requires:
>>     !  B::Keywords is not installed
>> ERRORS/WARNINGS FOUND IN PREREQUISITES.  You may wish to install the versions
>> of the modules indicated above before proceeding with this installation
>> Created MYMETA.yml and MYMETA.json
>> Creating new 'Build' script for 'Perl-Critic' version '1.140'
>>   PETDANCE/Perl-Critic-1.140.tar.gz
>>   /usr/bin/perl Build.PL -- OK
>> Running Build for P/PE/PETDANCE/Perl-Critic-1.140.tar.gz
>> ---- Unsatisfied dependencies detected during ----
>> ----     PETDANCE/Perl-Critic-1.140.tar.gz    ----
>>     B::Keywords [requires]
>> Running install for module 'B::Keywords'
>> Checksum for /Users/pbw/.cpan/sources/authors/id/R/RU/RURBAN/B-Keywords-1.22.tar.gz ok
>> Configuring R/RU/RURBAN/B-Keywords-1.22.tar.gz with Makefile.PL
>> Checking if your kit is complete...
>> Looks good
>> Generating a Unix-style Makefile
>> Writing Makefile for B::Keywords
>> Writing MYMETA.yml and MYMETA.json
>>   RURBAN/B-Keywords-1.22.tar.gz
>>   /usr/bin/perl Makefile.PL -- OK
>> Running make for R/RU/RURBAN/B-Keywords-1.22.tar.gz
>> cp lib/B/Keywords.pm blib/lib/B/Keywords.pm
>> Manifying 1 pod document
>>   RURBAN/B-Keywords-1.22.tar.gz
>>   /usr/bin/make -- OK
>> Running make test for RURBAN/B-Keywords-1.22.tar.gz
>> PERL_DL_NONLAZY=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
>> t/10basic.t ................. ok
>> t/11keywords.t .............. Can't open /System/Library/Perl/5.30/darwin-thread-multi-2level/CORE/keywords.h: No such file or directory at t/11keywords.t line 25.
>> t/11keywords.t .............. skipped: (no reason given)
>> t/export.t .................. ok
>> t/z_kwalitee.t .............. skipped: This test is only run for the module author
>> t/z_meta.t .................. skipped: This test is only run for the module author
>> t/z_perl_minimum_version.t .. skipped: Author tests not required for installation
>> t/z_pod-coverage.t .......... skipped: This test is only run for the module author
>> t/z_pod.t ................... ok
>> Test Summary Report
>> -------------------
>> t/11keywords.t            (Wstat: 512 Tests: 0 Failed: 0)
>>   Non-zero exit status: 2
>> Files=8, Tests=15,  0 wallclock secs ( 0.02 usr  0.01 sys +  0.18 cusr  0.04 csys =  0.25 CPU)
>> Result: FAIL
>> Failed 1/8 test programs. 0/15 subtests failed.
>> make: *** [test_dynamic] Error 255
>>   RURBAN/B-Keywords-1.22.tar.gz
>>   /usr/bin/make test -- NOT OK
>> //hint// to see the cpan-testers results for installing this module, try:
>>   reports RURBAN/B-Keywords-1.22.tar.gz
>> Stopping: 'install' failed for 'B::Keywords'.
>>> On 4 Aug 2021, at 5:06 pm, Geoff <cleanoutmyshed at gmail.com> wrote:
>>> 
>>> Hi Peter
>>> 
>>> How about sending through some diagnostics please?  Screenshot or error log.
>>> 
>>> Thanks
>>> 
>>> Geoff
>>> =====
>>> 
>>> On 4/08/2021 5:03 pm, Peter West wrote:
>>>> I have been trying to get Finance::Quote installed on my Mac M1, without success. I have tried installing using
>>>> cpan -i Date::Manip
>>>> cpan -i Finance::Quote
>>>> Installing Date::Manip works, but Finance::Quote fails installing B::Keywords.
>>>> Any ideas?
>>>>>>>> Peter West
>>>> pbw at ehealth.id.au
>>>> But immediately Jesus spoke to them, saying, “Take heart; it is I. Do not be afraid.”
>>>> _______________________________________________
>>>> gnucash-user mailing list
>>>> gnucash-user at gnucash.org
>>>> To update your subscription preferences or to unsubscribe:
>>>> https://lists.gnucash.org/mailman/listinfo/gnucash-user
>>>> If you are using Nabble or Gmane, please see https://wiki.gnucash.org/wiki/Mailing_Lists for more information.
>>>> -----
>>>> Please remember to CC this list on all your replies.
>>>> You can do this by using Reply-To-List or Reply-All.



More information about the gnucash-user mailing list