Compilieren von gnucash-1.7.8 mit --enable-openhbci
ChristophSchütz
ch.schuetz at addcom.de
Son Feb 2 13:06:17 CST 2003
Hallo,
ich habe ein hartnäckiges Problem beim compilieren von gnucash mit
openhbci-Funktion.
Trotzdem ich libchipcard 0.7.6 und openhbci 0.9.6 compiliert und installiert
habe erscheint folgende Fehlermeldung, wenn ich ./configure --enable-openhbci
laufen lasse:
checking for OpenHBCI... /usr/local
checking for OpenHBCI - version >= 0.9.4... no
*** Could not run OpenHBCI test program, checking why...
***
*** The test program compiled, but did not run. This usually means
*** that the run-time linker is not finding OpenHBCI or finding the wrong
*** version of OpenHBCI. If it is not finding OpenHBCI, you'll need to set
your
*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point
*** to the installed location Also, make sure you have run ldconfig if that
*** is required on your system.
***
*** If you have an old version installed, it is best to remove it, although
*** you may also be able to get things to work by modifying LD_LIBRARY_PATH.
***
Das configure openhbci nicht findet, kann eigentlich nicht sein, schließlich
zeigt die erste Zeile an, dass openhbci in /usr/local ist, wo es sich
tatsächlich befindet. Spuren alter Programme finde ich nicht, sollten
eigentlich auch nicht da sein, da ich mit checkinstall arbeite. Mit
LD_LIBRARY_PATH habe ich auch schon probiert aber leider ohne Erfolg.
Compiliere ich mit --disable-openhbcitest, so kann ich auch nachher bei
gnucash den Druid zur Hbci-Konfiguration aufrufen. Ich würde allerdings
lieber normal kompilieren, um sicher zu sein, dass alles richtig läuft.
P.S. Ich arbeite mit Suse Linux 7.3
Gruß Christoph