[GNC-dev] [GNC] GnuCash 3.906 Released

[Adrien Monteleone]

Funny enough, they were 1 or 2px.

In my re-test after using the reset option, I made sure to be careful to bring them to zero. Those widths weren’t retained at all.

I’ll try again to carefully set them all to very small and see what happens.

Regards,


> On Jun 24, 2020 w26d176, at 9:44 AM, Robert Fewell <14ubobit at gmail.com> wrote:
> 
> I think that is the problem, reduce those columns but make sure the columns are at least one pixel. I do not think they can be zero.
> 
> Bob
> 
> On Wed, 24 Jun 2020 at 15:41, Adrien Monteleone <adrien.monteleone at lusfiber.net> wrote:
> Thanks I’ll check for that glyph.
> 
> Concerning the layout, I used that option then opened other bills from a Vendor Report, as well as the same bill.
> 
> I just changed them again and used the menu entry again, and this time did a Find.
> 
> Now (check my reply to Geert) only ’Taxable?’ and ‘Billable?’ come back to default sizes. (and stay that way regardless of how I pull up that or other bills)
> 
> Regards,
> Adrien
> 
> > On Jun 24, 2020 w26d176, at 7:38 AM, Robert Fewell <14ubobit at gmail.com> wrote:
> > 
> > Adrien,
> > That is a bot surprising, there is a test for the glyphs in the font and if not present should default to 'f' and 'w', code points are..
> > #define GLYPH_PAPERCLIP "\360\237\223\216" // Codepoint U+1F4CE
> > #define GLYPH_LINK      "\360\237\224\227" // Codepoint U+1F517
> > 
> > Regarding the second point, 
> > Once you set the columns for the vendor bill, I presume you then used the menu option "Windows->Use as Default for Vendor Documents" which should save the layout.
> > Closed the Bill, did a find for a bill and hopefully the layout is the same.
> > 
> > Note the 'Windows' option will probably move to 'View' for 4.0
> > 
> > Regards,
> > Bob
> > 
> > 
> > On Wed, 24 Jun 2020 at 08:43, Adrien Monteleone <adrien.monteleone at lusfiber.net> wrote:
> > Is there a trick to this?
> > 
> > I just set a layout on a Vendor bill, then clicked the menu entry.
> > 
> > I closed the bill and opened a different one from the same vendor. The layout was not the one I saved.
> > 
> > I then re-opened the original bill and it too did not return with the saved layout.
> > 
> > 3.906 on MacOS 10.15.5
> > 
> > Regards,
> > Adrien
> > 
> > p.s. - better to keep the announcement thread title or change it per issue? (not sure of the protocol on this for testing releases)
> > 
> > > Add option to save Layout for Business items
> > > Add two menu items under windows, one to save an existing layout for Invoices, Bills and Vouchers to their respective default layouts so the user set column widths will be used. The second menu item will reset the column widths to defaults and remove the default layout. Open Business items will also save their column widths to the page section so these can temporarily have different widths.