Mac Install Problem 10.5

Rudye McGlothlin Rudye at LiquidOx.com
Tue Jan 8 09:41:39 EST 2008 

I'm still using 10.4, but I had the same trouble.  I finally got mine  
to work by setting up the symbolic links described here: http:// 
www.nabble.com/-13472%3A-gnucash-2.2.1-fails-to-build-on-Leopard-% 
2810.5.1%29-to14122502.html

Once you get it installed, let me know if your charts work  
correctly.  Mine are still all squirrely.

Regards,
Rudye


On Jan 7, 2008, at 2:57 PM, Some Guy wrote:

> I was wondering if anyone has had any luck yet at getting gnucash  
> working
> under 10.5.*?
>
> After some back and forth on the port mail list all the dependancys  
> now
> install fine (yay).
>
> There seems to be one last problem with the port file
> sudo port install gnucash +without_docsPassword:
> --->  Configuring gnucash
> Error: Target org.macports.configure returned: configure failure:  
> shell
> command " cd
> "/opt/local/var/macports/build/ 
> _opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome 
> _gnucash/work/gnucash-
> 2.2.1" && ./configure --prefix=/opt/local --disable-glibtest -- 
> disable-debug
> --disable-profile --disable-dependency-tracking --enable-hbci -- 
> enable-ofx "
> returned error 1
> Command output: checking for unistd.h... (cached) yes
> checking wctype.h usability... yes
> checking wctype.h presence... yes
> checking for wctype.h... yes
> checking for dlsym... yes
> checking for dlerror... yes
> checking for darwin... yes, moving on...
> checking for qt_null in -lqthreads... no
> checking for qt_null in -lqt... no
> checking for main in -ltermcap... yes
> checking for main in -lreadline... yes
> checking for guile-config... no
> checking for build-guile... (cached) no
> checking for sin in -lm... yes
> checking for main in -lrx... no
> checking for qt_null in -lqt... (cached) no
> checking for dlopen in -ldl... (cached) yes
> checking for t_accept in -lnsl... no
> checking for socket in -lsocket... no
> checking whether guile works... no
> configure: WARNING: Can not find Guile on this system
> checking for guile... no
> checking for guile - 1.6.0 <= version < 99.99.99... no:
> configure: WARNING: guile version check failed
> configure: error:
>
>   guile does not appear to be installed correctly, or is not in the
>   correct version range.  Perhaps you have not installed the guile
>   development packages?  Gnucash requires at least version 1.6 to  
> build.
>
>
> Error: Status 1 encountered during processing.
>
>
> On Dec 20, 2007 3:03 PM, David Reiser <dbreiser at earthlink.net> wrote:
>
>> I don't know macports very much at all, but the change needs to be
>> associated with the aqbanking port. So if you can figure out how  
>> to modify
>> the aqbanking port (probably installing that by itself with local
>> modifications to the port file), then you can install gnucash.
>> You probably want to email the aqbanking port maintainer, too.
>>
>> Dave
>>
>> On Dec 20, 2007, at 9:57 AM, Some Guy wrote:
>>
>> Thanks for the reply
>>
>> I know this may sound silly, but how do I do that? I tried to  
>> append it to
>> end of the sudo port install gnucash but that does not work
>>
>>
>> Thanks in advance for the help
>>
>> On Dec 20, 2007 2:42 PM, David Reiser <dbreiser at earthlink.net> wrote:
>>
>>> You need to add
>>>
>>> -Wl,-dylib_file,/System/Library/Frameworks/OpenGL.framework/ 
>>> Versions/A/
>>> Libraries/libGL.dylib:/System/Library/Frameworks/OpenGL.framework/
>>> Versions/A/Libraries/libGL.dylib
>>>
>>> to the LDFLAGS for building aqbanking. Welcome to Apple's latest  
>>> twist
>>> to the build system.
>>>
>>> Dave
>>> On Dec 20, 2007, at 6:55 AM, Some Guy wrote:
>>>
>>>> Hi, I have been trying to install gnucash on my Mac running  
>>>> Leopard.
>>>> I am
>>>> using MacPort to do it. I type "sudo port install gnucash" and  
>>>> after
>>>> a while
>>>> I get an error. What can I do to fix this? I have ran it again and
>>>> this is
>>>> the output in the terminal.
>>>>
>>>> Password:
>>>> --->  Building aqbanking with target all
>>>> Error: Target org.macports.build returned: shell command " cd
>>>> "/opt/local/var/macports/build/
>>>> _opt_local_var_macports_sources_rsync
>>>> .macports.org_release_ports_devel_aqbanking/work/aqbanking-
>>>> 2.2.9" && make all " returned error 2
>>>> Command output: make[6]: Nothing to be done for `all'.
>>>> Making all in dialogs
>>>> make[6]: Nothing to be done for `all'.
>>>> Making all in views
>>>> make[6]: Nothing to be done for `all'.
>>>> make[6]: Nothing to be done for `all-am'.
>>>> Making all in qbanking
>>>> Making all in lib
>>>> make  all-recursive
>>>> Making all in widgets
>>>> make  all-am
>>>> make[8]: Nothing to be done for `all-am'.
>>>> Making all in dialogs
>>>> make  all-am
>>>> make[8]: Nothing to be done for `all-am'.
>>>> Making all in views
>>>> make  all-am
>>>> make[8]: Nothing to be done for `all-am'.
>>>> /bin/sh ../../../../libtool --tag=CXX --mode=link /usr/bin/g+ 
>>>> +-4.0  -
>>>> O2 -g
>>>> -Wall  -L/opt/local/lib -g -o testlib  testlib.o
>>>> libqbanking.la/opt/local/var/macports/build/
>>>> _opt_local_var_macports_sources_rsync
>>>> .macports.org_release_ports_devel_aqbanking/work/aqbanking-
>>>> 2.2.9/src/libs/aqbanking/libaqbanking.la -lintl
>>>> /usr/bin/g++-4.0 -O2 -g -Wall -g -o .libs/testlib
>>>> testlib.o-Wl,-bind_at_load  -L/opt/local/lib ./.libs/ 
>>>> libqbanking.dylib
>>>> -L/usr/lib
>>>> -L/sw/lib -L/opt/local/lib/qt3/lib
>>>> /opt/local/lib/qt3/lib/libqt- mt.dylib-L/usr/X11R6/lib -lresolv -lz
>>>> -lGL /usr/X11/lib/libXmu.6.2.0.dylib
>>>> /opt/local/lib/libXrender.dylib /usr/X11/lib/libXrandr.2.0.0.dylib
>>>> /usr/X11/lib/libXcursor.1.0.2.dylib /usr/X11/lib/libXinerama.
>>>> 1.0.0.dylib
>>>> /opt/local/lib/libXft.dylib /opt/local/lib/libfreetype.dylib
>>>> /opt/local/lib/libfontconfig.dylib /usr/X11/lib/libXext.6.4.0.dylib
>>>> /usr/X11/lib/libX11.6.2.0.dylib -lm /usr/X11/lib/libSM.6.0.0.dylib
>>>> /usr/X11/lib/libICE.6.3.0.dylib -ldl
>>>> /opt/local/var/macports/build/
>>>> _opt_local_var_macports_sources_rsync
>>>> .macports.org_release_ports_devel_aqbanking/work/aqbanking-
>>>> 2.2.9/src/libs/aqbanking/.libs/libaqbanking.dylib
>>>> /opt/local/lib/libgwenhywfar.dylib -lssl -lcrypto
>>>> /opt/local/lib/libintl.dylib /opt/local/lib/libiconv.dylib -lc
>>>> ld: cycle in dylib re-exports with /usr/X11R6/lib/libGL.dylib
>>>> collect2: ld returned 1 exit status
>>>> make[7]: *** [testlib] Error 1
>>>> make[6]: *** [all-recursive] Error 1
>>>> make[5]: *** [all] Error 2
>>>> make[4]: *** [all-recursive] Error 1
>>>> make[3]: *** [all-recursive] Error 1
>>>> make[2]: *** [all-recursive] Error 1
>>>> make[1]: *** [all-recursive] Error 1
>>>> make: *** [all] Error 2
>>>>
>>>> Error: The following dependencies failed to build: aqbanking evince
>>>> audiofile avahi dbus xmlto getopt dbus-glib dbus-python25 py25- 
>>>> gobject
>>>
>>>> python25 py25-numeric gdbm libdaemon py25-gdbm py25-gtk py25-cairo
>>>> esound
>>>> gconf intltool orbit2 libidl gnome-doc-utils iso-codes py25-hashlib
>>>> openssl
>>>> py25-libxml2 gnome-icon-theme icon-naming-utils p5-getopt-long p5-
>>>> pathtools
>>>> p5-xml-simple p5-test-simple p5-test-harness p5-xml- 
>>>> namespacesupport
>>>> p5-xml-sax gnome-keyring libgcrypt libgpg-error gnome-vfs gnome- 
>>>> mime-
>>>> data
>>>> howl neon libart_lgpl libgnome libbonobo popt libgnomecanvas gail
>>>> libgnomeui
>>>> libbonoboui m4 nautilus eel gnome-desktop fribidi startup- 
>>>> notification
>>>> gnome-menus libexif librsvg libcroco libgsf shared-mime-info  
>>>> poppler
>>>> poppler-data gnucash-docs yelp firefox-x11 zip libgtkhtml goffice03
>>>> libgnomeprintui libgnomeprint bison libgnomecups pcre guile16  
>>>> readline
>>>> ncurses ncursesw gawk libgtkhtml3 p5-finance-quote p5-crypt-ssleay
>>>> p5-libwww-perl p5-compress-zlib p5-compress-raw-zlib p5-io- 
>>>> compress-
>>>> base
>>>> p5-scalar-list-utils p5-io-compress-zlib p5-html-parser p5-html- 
>>>> tagset
>>>> p5-uri p5-datemanip p5-html-tableextract slib slib-guile16
>>>> Error: Status 1 encountered during processing.
>>>> _______________________________________________
>>>> gnucash-user mailing list
>>>> gnucash-user at gnucash.org
>>>> https://lists.gnucash.org/mailman/listinfo/gnucash-user
>>>> -----
>>>> Please remember to CC this list on all your replies.
>>>> You can do this by using Reply-To-List or Reply-All.
>>>
>>> --
>>> David Reiser
>>> dbreiser at earthlink.net
>>>
>>>
>>>
>>>
>>>
>>
>> --
>> David Reiser
>> dbreiser at earthlink.net
>>
>>
>>
>>
>>
> _______________________________________________
> gnucash-user mailing list
> gnucash-user at gnucash.org
> https://lists.gnucash.org/mailman/listinfo/gnucash-user
> -----
> Please remember to CC this list on all your replies.
> You can do this by using Reply-To-List or Reply-All.

More information about the gnucash-user mailing list