Mac Install Problem 10.5

[Some Guy]

I was wondering if anyone has had any luck yet at getting gnucash working
under 10.5.*?

After some back and forth on the port mail list all the dependancys now
install fine (yay).

There seems to be one last problem with the port file
sudo port install gnucash +without_docsPassword:
--->  Configuring gnucash
Error: Target org.macports.configure returned: configure failure: shell
command " cd
"/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_gnome_gnucash/work/gnucash-
2.2.1" && ./configure --prefix=/opt/local --disable-glibtest --disable-debug
--disable-profile --disable-dependency-tracking --enable-hbci --enable-ofx "
returned error 1
Command output: checking for unistd.h... (cached) yes
checking wctype.h usability... yes
checking wctype.h presence... yes
checking for wctype.h... yes
checking for dlsym... yes
checking for dlerror... yes
checking for darwin... yes, moving on...
checking for qt_null in -lqthreads... no
checking for qt_null in -lqt... no
checking for main in -ltermcap... yes
checking for main in -lreadline... yes
checking for guile-config... no
checking for build-guile... (cached) no
checking for sin in -lm... yes
checking for main in -lrx... no
checking for qt_null in -lqt... (cached) no
checking for dlopen in -ldl... (cached) yes
checking for t_accept in -lnsl... no
checking for socket in -lsocket... no
checking whether guile works... no
configure: WARNING: Can not find Guile on this system
checking for guile... no
checking for guile - 1.6.0 <= version < 99.99.99... no:
configure: WARNING: guile version check failed
configure: error:

  guile does not appear to be installed correctly, or is not in the
  correct version range.  Perhaps you have not installed the guile
  development packages?  Gnucash requires at least version 1.6 to build.


Error: Status 1 encountered during processing.


On Dec 20, 2007 3:03 PM, David Reiser <dbreiser at earthlink.net> wrote:

> I don't know macports very much at all, but the change needs to be
> associated with the aqbanking port. So if you can figure out how to modify
> the aqbanking port (probably installing that by itself with local
> modifications to the port file), then you can install gnucash.
> You probably want to email the aqbanking port maintainer, too.
>
> Dave
>
> On Dec 20, 2007, at 9:57 AM, Some Guy wrote:
>
> Thanks for the reply
>
> I know this may sound silly, but how do I do that? I tried to append it to
> end of the sudo port install gnucash but that does not work
>
>
> Thanks in advance for the help
>
> On Dec 20, 2007 2:42 PM, David Reiser <dbreiser at earthlink.net> wrote:
>
> > You need to add
> >
> > -Wl,-dylib_file,/System/Library/Frameworks/OpenGL.framework/Versions/A/
> > Libraries/libGL.dylib:/System/Library/Frameworks/OpenGL.framework/
> > Versions/A/Libraries/libGL.dylib
> >
> > to the LDFLAGS for building aqbanking. Welcome to Apple's latest twist
> > to the build system.
> >
> > Dave
> > On Dec 20, 2007, at 6:55 AM, Some Guy wrote:
> >
> > > Hi, I have been trying to install gnucash on my Mac running Leopard.
> > > I am
> > > using MacPort to do it. I type "sudo port install gnucash" and after
> > > a while
> > > I get an error. What can I do to fix this? I have ran it again and
> > > this is
> > > the output in the terminal.
> > >
> > > Password:
> > > --->  Building aqbanking with target all
> > > Error: Target org.macports.build returned: shell command " cd
> > > "/opt/local/var/macports/build/
> > > _opt_local_var_macports_sources_rsync
> > > .macports.org_release_ports_devel_aqbanking/work/aqbanking-
> > > 2.2.9" && make all " returned error 2
> > > Command output: make[6]: Nothing to be done for `all'.
> > > Making all in dialogs
> > > make[6]: Nothing to be done for `all'.
> > > Making all in views
> > > make[6]: Nothing to be done for `all'.
> > > make[6]: Nothing to be done for `all-am'.
> > > Making all in qbanking
> > > Making all in lib
> > > make  all-recursive
> > > Making all in widgets
> > > make  all-am
> > > make[8]: Nothing to be done for `all-am'.
> > > Making all in dialogs
> > > make  all-am
> > > make[8]: Nothing to be done for `all-am'.
> > > Making all in views
> > > make  all-am
> > > make[8]: Nothing to be done for `all-am'.
> > > /bin/sh ../../../../libtool --tag=CXX --mode=link /usr/bin/g++-4.0  -
> > > O2 -g
> > > -Wall  -L/opt/local/lib -g -o testlib  testlib.o
> > > libqbanking.la/opt/local/var/macports/build/
> > > _opt_local_var_macports_sources_rsync
> > > .macports.org_release_ports_devel_aqbanking/work/aqbanking-
> > > 2.2.9/src/libs/aqbanking/libaqbanking.la -lintl
> > > /usr/bin/g++-4.0 -O2 -g -Wall -g -o .libs/testlib
> > > testlib.o-Wl,-bind_at_load  -L/opt/local/lib ./.libs/libqbanking.dylib
> > > -L/usr/lib
> > > -L/sw/lib -L/opt/local/lib/qt3/lib
> > > /opt/local/lib/qt3/lib/libqt- mt.dylib-L/usr/X11R6/lib -lresolv -lz
> > > -lGL /usr/X11/lib/libXmu.6.2.0.dylib
> > > /opt/local/lib/libXrender.dylib /usr/X11/lib/libXrandr.2.0.0.dylib
> > > /usr/X11/lib/libXcursor.1.0.2.dylib /usr/X11/lib/libXinerama.
> > > 1.0.0.dylib
> > > /opt/local/lib/libXft.dylib /opt/local/lib/libfreetype.dylib
> > > /opt/local/lib/libfontconfig.dylib /usr/X11/lib/libXext.6.4.0.dylib
> > > /usr/X11/lib/libX11.6.2.0.dylib -lm /usr/X11/lib/libSM.6.0.0.dylib
> > > /usr/X11/lib/libICE.6.3.0.dylib -ldl
> > > /opt/local/var/macports/build/
> > > _opt_local_var_macports_sources_rsync
> > > .macports.org_release_ports_devel_aqbanking/work/aqbanking-
> > > 2.2.9/src/libs/aqbanking/.libs/libaqbanking.dylib
> > > /opt/local/lib/libgwenhywfar.dylib -lssl -lcrypto
> > > /opt/local/lib/libintl.dylib /opt/local/lib/libiconv.dylib -lc
> > > ld: cycle in dylib re-exports with /usr/X11R6/lib/libGL.dylib
> > > collect2: ld returned 1 exit status
> > > make[7]: *** [testlib] Error 1
> > > make[6]: *** [all-recursive] Error 1
> > > make[5]: *** [all] Error 2
> > > make[4]: *** [all-recursive] Error 1
> > > make[3]: *** [all-recursive] Error 1
> > > make[2]: *** [all-recursive] Error 1
> > > make[1]: *** [all-recursive] Error 1
> > > make: *** [all] Error 2
> > >
> > > Error: The following dependencies failed to build: aqbanking evince
> > > audiofile avahi dbus xmlto getopt dbus-glib dbus-python25 py25-gobject
> >
> > > python25 py25-numeric gdbm libdaemon py25-gdbm py25-gtk py25-cairo
> > > esound
> > > gconf intltool orbit2 libidl gnome-doc-utils iso-codes py25-hashlib
> > > openssl
> > > py25-libxml2 gnome-icon-theme icon-naming-utils p5-getopt-long p5-
> > > pathtools
> > > p5-xml-simple p5-test-simple p5-test-harness p5-xml-namespacesupport
> > > p5-xml-sax gnome-keyring libgcrypt libgpg-error gnome-vfs gnome-mime-
> > > data
> > > howl neon libart_lgpl libgnome libbonobo popt libgnomecanvas gail
> > > libgnomeui
> > > libbonoboui m4 nautilus eel gnome-desktop fribidi startup-notification
> > > gnome-menus libexif librsvg libcroco libgsf shared-mime-info poppler
> > > poppler-data gnucash-docs yelp firefox-x11 zip libgtkhtml goffice03
> > > libgnomeprintui libgnomeprint bison libgnomecups pcre guile16 readline
> > > ncurses ncursesw gawk libgtkhtml3 p5-finance-quote p5-crypt-ssleay
> > > p5-libwww-perl p5-compress-zlib p5-compress-raw-zlib p5-io-compress-
> > > base
> > > p5-scalar-list-utils p5-io-compress-zlib p5-html-parser p5-html-tagset
> > > p5-uri p5-datemanip p5-html-tableextract slib slib-guile16
> > > Error: Status 1 encountered during processing.
> > > _______________________________________________
> > > gnucash-user mailing list
> > > gnucash-user at gnucash.org
> > > https://lists.gnucash.org/mailman/listinfo/gnucash-user
> > > -----
> > > Please remember to CC this list on all your replies.
> > > You can do this by using Reply-To-List or Reply-All.
> >
> > --
> > David Reiser
> > dbreiser at earthlink.net
> >
> >
> >
> >
> >
>
> --
> David Reiser
> dbreiser at earthlink.net
>
>
>
>
>