[GNC] Fwd: The two modules

Stephen M. Butler kg7je at arrl.net
Wed Jun 20 16:17:13 EDT 2018


Then I ran into this problem.  Researching.

I don't see 'gwenhywfar' listed on the installation page.  Attempting to
install says package not found. 

$ cmake -D CMAKE_INStALL_PREFIX=/usr/local ../gnucash-3.1
-- The C compiler identification is GNU 7.3.0
-- The CXX compiler identification is GNU 7.3.0
-- Check for working C compiler: /usr/bin/cc
-- Check for working C compiler: /usr/bin/cc -- works
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Detecting C compile features
-- Detecting C compile features - done
-- Check for working CXX compiler: /usr/bin/c++
-- Check for working CXX compiler: /usr/bin/c++ -- works
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
-- Detecting CXX compile features
-- Detecting CXX compile features - done
-- Found PkgConfig: /usr/bin/pkg-config (found version "0.29.1")
-- Checking for module 'glib-2.0>=2.40'
--   Found glib-2.0, version 2.56.1
-- Checking for module 'gio-2.0'
--   Found gio-2.0, version 2.56.1
-- Checking for module 'gobject-2.0>=2.20'$ cmake -D
CMAKE_INStALL_PREFIX=/usr/local ../gnucash-3.1
-- The C compiler identification is GNU 7.3.0
-- The CXX compiler identification is GNU 7.3.0
-- Check for working C compiler: /usr/bin/cc
-- Check for working C compiler: /usr/bin/cc -- works
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Detecting C compile features
-- Detecting C compile features - done
-- Check for working CXX compiler: /usr/bin/c++
-- Check for working CXX compiler: /usr/bin/c++ -- works
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
-- Detecting CXX compile features
-- Detecting CXX compile features - done
-- Found PkgConfig: /usr/bin/pkg-config (found version "0.29.1")
-- Checking for module 'glib-2.0>=2.40'
--   Found glib-2.0, version 2.56.1
-- Checking for module 'gio-2.0'
--   Found gio-2.0, version 2.56.1
-- Checking for module 'gobject-2.0>=2.20'
--   Found gobject-2.0, version 2.56.1
-- Checking for module 'gmodule-2.0>=2.20'
--   Found gmodule-2.0, version 2.56.1
-- Checking for module 'gthread-2.0>=2.20'
--   Found gthread-2.0, version 2.56.1
-- Checking for module 'libxml-2.0>=2.7.0'
--   Found libxml-2.0, version 2.9.4
-- Checking for module 'libxslt'
--   Found libxslt, version 1.1.29
-- Checking for module 'webkit2gtk-4.0'
--   Found webkit2gtk-4.0, version 2.20.3
-- Checking for module 'gtk+-3.0>=3.10.0'
--   Found gtk+-3.0, version 3.22.30
-- Checking for module 'zlib'
--   Found zlib, version 1.2.11
-- Found Gettext: /usr/bin/msgmerge (found suitable version "0.19.8.1",
minimum required is "0.19.6")
-- Using guile-2.0.x
-- Using guile SRFI-64
-- Checking for module 'gwenhywfar'
--   No package 'gwenhywfar' found
CMake Error at /usr/share/cmake-3.10/Modules/FindPkgConfig.cmake:415
(message):
  A required package was not found
Call Stack (most recent call first):
  /usr/share/cmake-3.10/Modules/FindPkgConfig.cmake:593
(_pkg_check_modules_internal)
  common/cmake_modules/GncFindPkgConfig.cmake:253 (PKG_CHECK_MODULES)
  CMakeLists.txt:347 (GNC_PKG_CHECK_MODULES)


-- Configuring incomplete, errors occurred!
See also "/home/steve/Projects/GnuCash/mybuild/CMakeFiles/CMakeOutput.log".

--   Found gobject-2.0, version 2.56.1
-- Checking for module 'gmodule-2.0>=2.20'
--   Found gmodule-2.0, version 2.56.1
-- Checking for module 'gthread-2.0>=2.20'
--   Found gthread-2.0, version 2.56.1
-- Checking for module 'libxml-2.0>=2.7.0'
--   Found libxml-2.0, version 2.9.4
-- Checking for module 'libxslt'
--   Found libxslt, version 1.1.29
-- Checking for module 'webkit2gtk-4.0'
--   Found webkit2gtk-4.0, version 2.20.3
-- Checking for module 'gtk+-3.0>=3.10.0'
--   Found gtk+-3.0, version 3.22.30
-- Checking for module 'zlib'
--   Found zlib, version 1.2.11
-- Found Gettext: /usr/bin/msgmerge (found suitable version "0.19.8.1",
minimum required is "0.19.6")
-- Using guile-2.0.x
-- Using guile SRFI-64
-- Checking for module 'gwenhywfar'
--   No package 'gwenhywfar' found
CMake Error at /usr/share/cmake-3.10/Modules/FindPkgConfig.cmake:415
(message):
  A required package was not found
Call Stack (most recent call first):
  /usr/share/cmake-3.10/Modules/FindPkgConfig.cmake:593
(_pkg_check_modules_internal)
  common/cmake_modules/GncFindPkgConfig.cmake:253 (PKG_CHECK_MODULES)
  CMakeLists.txt:347 (GNC_PKG_CHECK_MODULES)


-- Configuring incomplete, errors occurred!
See also "/home/steve/Projects/GnuCash/mybuild/CMakeFiles/CMakeOutput.log".

Stephen M Butler, PMP, PSM
Stephen.M.Butler51 at gmail.com
kg7je at arrl.net
253-350-0166
-------------------------------------------
GnuPG Fingerprint:  8A25 9726 D439 758D D846 E5D4 282A 5477 0385 81D8

On 06/20/2018 12:34 PM, Stephen M. Butler wrote:
> I decided to pull down the latest version (I know a new one is coming in
> just a few days) to be sure I could compile it and utilize the latest
> versions of the reports for this mock company.
>
> But, I ran into a slight problem installing the packages and hope I made
> the right choice:  $ sudo apt-get install swig2.0
> Reading package lists... Done
> Building dependency tree      
> Reading state information... Done
> Package swig2.0 is not available, but is referred to by another package.
> This may mean that the package is missing, has been obsoleted, or
> is only available from another source
> However the following packages replace it:
>   swig:i386 swig
>
> E: Package 'swig2.0' has no installation candidate
>
>
> $ sudo apt-get install swig
> Reading package lists... Done
> Building dependency tree      
> Reading state information... Done
> The following additional packages will be installed:
>   swig3.0
>
>
> Someone may wish to update the
> https://wiki.gnucash.org/wiki/BuildUbuntu16.04 page I was following. 
> I'm on Ubuntu 18.04.
>
> --Steve
>
> Stephen M Butler, PMP, PSM
> Stephen.M.Butler51 at gmail.com
> kg7je at arrl.net
> 253-350-0166
> -------------------------------------------
> GnuPG Fingerprint:  8A25 9726 D439 758D D846 E5D4 282A 5477 0385 81D8
>
> On 06/18/2018 03:32 PM, Christopher Lam wrote:
> <<snip a lot of stuff>>



More information about the gnucash-user mailing list