[GNC] GnuCash 3.2 Released

Geert Janssens geert.gnucash at kobaltwit.be
Fri Jun 29 03:42:47 EDT 2018 

Op maandag 25 juni 2018 19:42:37 CEST schreef Stephen M. Butler:
> Further research:
> 
> It appears that net-charts.scm is a replacement for two other files in
> standard-reports:  net-linecharts.scm and net-barcharts.scm
> 
> I renamed those two to have a .old extension on them and GnuCash now
> starts up without complaining about duplicate report IDs.
> 

Ah indeed. As you indicated you didn't uninstall first, the old files remained 
in the installation directory causing the conflict.

The formal way to uninstall is a bit picky. You should run "make uninstall" in 
your build directory *before* changing the source directory to a newer version 
(be it a new git checkout or pull, or installing a new release tar ball).

If you installed gnucash in it's own prefix (by adding
-DCMAKE_INSTALL_PREFIX=xyz to your cmake run), uninstalling would be as easy 
as deleting this prefix.

But in this case manually removing/renaming the offending files works as well. 
I would remove/rename the corresponding .go files in gnucash' lib64/gnucash/
scm/ccache/ directory as well though.

Geert

> 
> Stephen M Butler, PMP, PSM
> Stephen.M.Butler51 at gmail.com
> kg7je at arrl.net
> 253-350-0166
> -------------------------------------------
> GnuPG Fingerprint:  8A25 9726 D439 758D D846 E5D4 282A 5477 0385 81D8
> 
> On 06/25/2018 10:20 AM, Stephen M. Butler wrote:
> > Compiled and installed on Ubuntu 18.04.
> > 
> > When starting up it reports several duplicate report IDs.  Should I have
> > uninstalled 3.1 first?  I did these commands (with an empty mybuild):
> > 
> > cd mybuild
> > 
> > cmake ../gnucash-3.2
> > 
> > make
> > 
> > sudo make install
> > 
> > 
> > Stephen M Butler, PMP, PSM
> > Stephen.M.Butler51 at gmail.com
> > kg7je at arrl.net
> > 253-350-0166
> > -------------------------------------------
> > GnuPG Fingerprint:  8A25 9726 D439 758D D846 E5D4 282A 5477 0385 81D8
> > 
> > On 06/24/2018 08:40 PM, John Ralls wrote:
> >> The GnuCash development team announces GnuCash 3.2, the second release of
> >> the 3.x stable release series.
> >> 
> >> Changes
> >> 
> >> Between 3.0 and 3.2, the following bugfixes were accomplished:
> >> 	• Bug 787401 - Test Report System - Report Definition.
> >> 	• Bug 794617 - Can't compile with -DWITH_GNUCASH=NO due to
> >> 	scm-gnome-utils.
> >> 	• Bug 795101 - Scroll Bar in Reconcile Window Floats in and covers 
the
> >> 	check boxes. • Bug 795247 - datepicker broken in Persian. GnuCash
> >> 	passes dates as integer y/m/d without using locale-specific formats, 
so
> >> 	we need to strip out 'E' and 'O' from the format when scanning dates 
or
> >> 	determining separators in gnc-date. None of '-', 'E', or 'O' are
> >> 	supported by boost (and '-' causes errors), so strip them out from
> >> 	formatters in gnc-datetime as well. • Bug 795253 - Have problems 
input
> >> 	Chinese.
> >> 	• Bug 795272 - QIF importer causes application crash if action is
> >> 	invalid.
> >> 	• Bug 795276 - Invalid date on price stops file from being parsed.
> >> 	• Bug 795362 - Special variable "i" not parsed in function calls. Due 
to
> >> 	balance tests with insane random values. • Bug 795471 - Impossible to
> >> 	Edit Budget Unless Maximized.
> >> 	• Bug 795519 - Credit card payment after reconciliation.
> >> 	• Bug 795666 - Backslash '\' in Description field spoils CSV Import
> >> 	without helpful error message. • Bug 795831 - When read only 
threshold
> >> 	set, dates are silently changed. Display a message box informing the
> >> 	user of the change. • Bug 795944 - Cannot store change to Business
> >> 	Suppliers data.
> >> 	• Bug 796079 - Repeatable Crash in Tax Report Options.
> >> 	• Bug 796081 - Tax Schedule Report - An error occurred while running 
the
> >> 	report. • Bug 796083 - Reconcile Selection Doesn't Work Anymore.
> >> 	• Bug 796117 - Connecting 3.1 to an existing mysql db drops all data.
> >> 	Provide a backup recovery function that instead of dropping primaries
> >> 	and restoring backups merges the primaries and backups. This should
> >> 	handle a worst-case safe-save failure where the backup tables don't
> >> 	have a complete set of rows for some reason. • Bug 796256 - Main 
Window
> >> 	stays hidden when starting after closing main window while minimized. 
•
> >> 	Bug 796369 - Notes lost or perhaps just not displaying when using
> >> 	SQLite backend. This bug caused data loss if you saved your SQLite3
> >> 	database to a different file or database. The problem is that in
> >> 	SQLite3 (though not in MySQL or PgSQL) the subquery ((SELECT DISTINCT
> >> 	guid FROM transactions)) (note the double parentheses) returns only 
the
> >> 	first guid in the subquery's results. Some transactions are loaded by
> >> 	special queries and those queries are also used to retrieve the
> >> 	transaction's slots so they weren't affected. • Bug 796398 - Restrict
> >> 	accelerator keys to valid date range.
> >> 	• Bug 796409 - Incorrect Current Value for Stocks. Missed calculating
> >> 	the value in the register summary bar. • Bug 796423 - Cannot Input
> >> 	Chinese, seems does not work with other IME too. Toggles not in view
> >> 	with all rows selected weren't being redrawn. • Bug 796484 - csv
> >> 	import: iostream error. Unfortunately it turns out that we can't use
> >> 	filestreams because they can't take path arguments containing Unicode
> >> 	on Windows. • Bug 796527 - invalid currency on scheduled 
transactions.
> >> 	
> >> 		• Don't even check for price/exchange rate on template 
transactions,
> >> 		there's no point. • Check all split commodities are valid, abort
> >> 		transaction creation if not. • If the template transaction's 
currency
> >> 		isn't used by any of the splits set the new transaction's 
currency to
> >> 		the first-found currency if there is one, otherwise to the 
first-found
> >> 		commodity.>> 	
> >> 	• Bug 796537 - Transaction Report cannot sort by "num".
> >> 	• Bug 796586 - QIF import incorrectly converts unicode characters 
from
> >> 	UTF8 encoded file. • Bug 796595 - QIF Import Select Account button to
> >> 	add a new account is labled gnc-account-new but should be New. • Bug
> >> 	796600 - stock split cash-in-lieu income/asset labels backwards. • 
Bug
> >> 	796614 - Reconciliation report contains incorrect transactions. • Bug
> >> 	796638 - configuration not properly saved for CSV transactions import
> >> 	form.>> 
> >> The Following fixes and improvemts were not associated with bug reports:
> >> 	• Transaction report improvements:
> >> 		• Performance: Do all filtering ops before sorting.
> >> 		• Move the options summary before the subtotals table.
> >> 		• New unit tests
> >> 		• Enable computing averages in subtotal grid.
> >> 		• Generate the subtotal grid only if the primary sort key 
enables
> >> 		subtotals. • Fix subtotal grid to support multiple commodities.
> >> 		• New filters.
> >> 		• Much cleaning and refactoring of the internals.
> >> 	
> >> 	• Cache the num-split-action book option to avoid thousands of KVP
> >> 	queries for the same value when loading a register. • Create a static
> >> 	string for book option KVPs to save an extra malloc/free on old
> >> 	compilers without small-string optimization. • Add tooltip support 
for
> >> 	register cells.
> >> 	• New unit tests for the balance sheet report and invoices.
> >> 	• Consolidate charting code into a single module.
> >> 	• Removed an incomplete and abandoned C implementation of QIF import.
> >> 	• Restored libsecret support that had been left out of CMake.
> >> 	• Replace old-style html style attributes with css.
> >> 	• Modify emitted html to be parseable by the Guile SXML module for
> >> 	testing.
> >> 	• Remove support for long-gone gtkhtml renderer.
> >> 	• Clean up code generating html tables.
> >> 	• Ensure full precision of doubles is saved to SQL. std::iostream's
> >> 	operator<<(double) uses only 6 digits of precision by default. • Make
> >> 	float database operations more consistent, working around dbd-
sqlite3's
> >> 	failure to support doubles (dbd-sqlite3, not sqlite3 itself). • 
Prevent
> >> 	crash in gnc-tree-view.c: When getting information from the state 
file,
> >> 	protect against the key not having a '_' which is used to split the
> >> 	string. • Add the full account name to the saved register settings If
> >> 	you need to delete the layout for a register in the settings file, 
the
> >> 	only thing identifying it is the account guid. To make it easier for
> >> 	humans, add the full account name also. • When register pages are
> >> 	restored it uses the full account name. When register pages are
> >> 	restored, the account is found from the full name so if the separator
> >> 	changes it will fail. Instead, also save the account guid and use 
that
> >> 	as default to find the account falling back to the full name. • Fix
> >> 	misplaced try block that caused unhandled exception if year out of
> >> 	range. • Fix permanent storage of vendor details: Since the data 
types
> >> 	did not match for the billterms and taxtable, those references/guids
> >> 	were not saved to the database. • Update invoice reports to use 
totals
> >> 	calculate by gncInvoice. This should give a consistent representation
> >> 	of invoice data across the application.>> 	
> >> 	• Ensure gncEntry rounding is consistent. Internally calculated 
values in the entry are never rounded. Consumers of gncEntry's calculated 
values can request them either rounded or not. Next use a pragmatical approach 
for calculating values on invoices based on the entry values: do the rounding 
such that we never create an unbalanced transaction while posting. That means:
> >> 		• round each entry's net value before summing them in net total
> >> 		• accumulate all tax totals on invoice level per tax account 
before
> >> 		rounding>> 
> >> and round before before summing them in a global tax total Hopefully this
> >> will catch a few more rounding issues in this area. A complete solution
> >> can only offered if we allow users to manually correct tax entries. This
> >> requires changes to user interface and data format so that's not going
> >> to happen in gnucash 3.x.>> 
> >> 	• Use Scheme SRFI-64 test framework for new Scheme unit tests.
> >> 	• New compilers (gcc-8.0 and Xcode 9) bring new warnings, so several
> >> 	fixups to mollify them. • Lowercase all cmake commands for better
> >> 	readability.
> >> 	• Metadate migration (2.6.x->3.x) fixes for Windows.
> >> 	• Ensure timezone is set correctly in FreeBSD.
> >> 
> >> The following translations are updated: Dutch
> >> 
> >> Known Issues
> >> 
> >> The following are open bug reports new to the 3.x series considered 
significant by the development team:
> >> 	• 789594 - Unable to overwrite sqlite3 database file
> >> 	• 791825 - Accounting Period dates (among others) stored with a
> >> 	TZ-sensitive time. • 792397 - Incomplete Update to 2.7.x - not all
> >> 	online banking data is available. • 793306 - Price is not imported 
from
> >> 	CSV
> >> 	• 793556 - CSV export/import creates unbalanced transaction for
> >> 	fractional price. • 794755 - Commodity Register displays fractional
> >> 	prices
> >> 	• 795383 - Gnucash crashes on import of a 1400-transaction (or more) 
CSV
> >> 	file • 795614 - Unicode handling in amount fields.
> >> 	• 795804 - Extremely slow save
> >> 	• 796054 - Unposting and reposting invoice doubles amounts.
> >> 	• 796084 - Frequent Crashes During Data Entry.
> >> 	• 796100 - Autosave Doesn't Always Work.
> >> 	• 796248 - Editing Scheduled Transaction.
> >> 	• 796474 - Segmentation fault while setting up online banking
> >> 	• 796492 - Wrong calculation of the first occurrence
> >> 	• 796500 - Scalability issue - importing large CSV to large book 
won't
> >> 	finish. • 796520 - Layout overlapping in Income & Expense Chart.
> >> 	• 796537 - Transaction Report cannot sort by "num".
> >> 	• 796579 - Cannot go forward with empty duplicates screen.
> >> 	• 796591 - Crash on keyboard entry in register when not clicking or
> >> 	tabbing first. • 796614 - Reconciliation report contains incorrect
> >> 	transactions.
> >> 	• 796656 - GnuCash frequently crashes, usually involving unsaved
> >> 	transactions.>> 
> >> Documentation
> >> 
> >> Concurrent with the release of Gnucash 3.2 we're pleased to also release
> >> a new version 3.2 of the companion Help and Tutorial and Concepts 
Guide.>> 
> >> Documentation changes:
> >> 	• Bug 796098 - V 3.1 Missing images in Tutorial and Concepts Guide in
> >> 	PDF and Online Help pages. • Bug 795980 - Void Reason Has No Visible
> >> 	Purpose.
> >> 
> >> Getting GnuCash for Windows and MacOS X
> >> 
> >> GnuCash is provided for both Microsoft Windows XP® and later and MacOS X
> >> 10.9 (Mavericks)® and later in pre-built, all-in-one packages. An
> >> installer is provided for Microsoft Windows® while the MacOS X® package
> >> is a disk image containing a drag-and-drop application bundle.>> 
> >> The SHA256 Hashes for the downloadable files are:
> >> 	• 63e5b00c148ed0f7021ebc03e4e70c4a9c549feb3ea49d6c810f2abaaf592452 
> >> 	gnucash-3.2.tar.bz2 •
> >> 	beb028b6933f57a6dad89f0c0a54ffe7b5dd42bbd3f532405f4ffd01cc5eaa5c 
> >> 	gnucash-3.2.tar.gz •
> >> 	0e06acfe7a9746eacf5282ba27919625b51c3d51fd548e6a529f78ff759ed70f 
> >> 	gnucash-3.2.setup.exe •
> >> 	05e51cf24d0d85b9aef40f90d70ea118ef0cee2dee342af98ca64609524c4b9f 
> >> 	Gnucash-Intel-3.2-1.dmg •
> >> 	469a524352a3b0e5308ba68a3c0fac79a501998b29db9c16a714ce879aa9c39c 
> >> 	gnucash-docs-3.2.tar.gz>> 
> >> Getting GnuCash for Windows and MacOS
> >> 
> >> GnuCash is provided for both Microsoft Windows XP® and later and MacOS X
> >> 10.9 (Mavericks)® and later in pre-built, all-in-one packages. An
> >> installer is provided for Microsoft Windows® while the MacOS X® package
> >> is a disk image containing a drag-and-drop application bundle.
> >> SourceForge:
> >> 
> >> Download GnuCash for Win32:
> >> https://downloads.sourceforge.net/sourceforge/gnucash/gnucash-3.2.setup.
> >> exe Download GnuCash for Mac-Intel:
> >> https://downloads.sourceforge.net/sourceforge/gnucash/Gnucash-Intel-3.2-> >> 1.dmg
> >> 
> >> Github
> >> 
> >> Download GnuCash for Win32:
> >> https://github.com/Gnucash/gnucash/releases/download/3.2/gnucash-3.2.set
> >> up.exe Download GnuCash for Mac-Intel:
> >> https://github.com/Gnucash/gnucash/releases/download/3.2/Gnucash-Intel-3
> >> .2-1.dmg
> >> 
> >> Getting GnuCash as source code
> >> 
> >> If you want to compile GnuCash 3.2 for yourself, the source code can be
> >> downloaded from:>> 
> >> Sourceforge:
> >>    http://downloads.sourceforge.net/sourceforge/gnucash/gnucash-3.2.tar.b
> >>    z2
> >>    http://downloads.sourceforge.net/sourceforge/gnucash/gnucash-3.2.tar.g
> >>    z
> >> 
> >> Github:
> >>    https://github.com/Gnucash/gnucash/releases/download/3.2/gnucash-3.2.t
> >>    ar.bz2
> >>    https://github.com/Gnucash/gnucash/releases/download/3.2/gnucash-3.2.
> >>    tar.gz WARNING Do not try to use the github-generated files labelled
> >>    "Source Code". They have not been processed with swig and will not
> >>    build.
> >> 
> >> You can also checkout the sources: git clone
> >> https://github.com/Gnucash/gnucash.
> >> 
> >> 
> >> Please consult the README.dependencies file in the sources for the
> >> required dependencies and versions needed to build GnuCash from source.
> >> Additional information on building GnuCash may be found at
> >> https://wiki.gnucash.org/wiki/Building.
> >> 
> >> Getting the documentation
> >> 
> >> The documentation is available at Documentation page of the GnuCash
> >> website. The 3.1 documentation can be found under "GnuCash v3 (current
> >> stable release)" in multiple languages both for reading online and for
> >> download in pdf, epub, and mobi formats.>> 
> >> If you want to compile the GnuCash Documentation 3.2 for yourself, the 
source code can be downloaded from:
> >>   Sourceforge:
> >>   http://downloads.sourceforge.net/sourceforge/gnucash/gnucash-docs-3.2.
> >>   tar.gz GitHub:
> >>   https://github.com/Gnucash/gnucash/releases/download/3.2/gnucash-docs-> >>   3.2.tar.gz You can also checkout the sources directly from the git
> >>   repository as described at https://wiki.gnucash.org/wiki/Git.>> 
> >> Detailed instructions for building GnuCash may be found at
> >> https://wiki.gnucash.org/wiki/Building and for the Documentation at
> >> https://wiki.gnucash.org/wiki/Initializing_Documentation_Build_Environme
> >> nt.
> >> 
> >> About the Program
> >> 
> >> GnuCash is a free, open source accounting program released under the GNU
> >> General Public License (GPL) and available for GNU/Linux, *BSD, Solaris,
> >> Mac OSX and Microsoft Windows. Programming on GnuCash began in 1997, and
> >> its first stable release was in 1998.
> >> 
> >> _______________________________________________
> >> gnucash-user mailing list
> >> gnucash-user at gnucash.org
> >> To update your subscription preferences or to unsubscribe:
> >> https://lists.gnucash.org/mailman/listinfo/gnucash-user
> >> If you are using Nabble or Gmane, please see
> >> https://wiki.gnucash.org/wiki/Mailing_Lists for more information. -----
> >> Please remember to CC this list on all your replies.
> >> You can do this by using Reply-To-List or Reply-All.
> 
> _______________________________________________
> gnucash-user mailing list
> gnucash-user at gnucash.org
> To update your subscription preferences or to unsubscribe:
> https://lists.gnucash.org/mailman/listinfo/gnucash-user
> If you are using Nabble or Gmane, please see
> https://wiki.gnucash.org/wiki/Mailing_Lists for more information. -----
> Please remember to CC this list on all your replies.
> You can do this by using Reply-To-List or Reply-All.

More information about the gnucash-user mailing list