[GNC] Possible to Set and Save an Individual Register's Default Style?
Tom Route36
tom.route36 at gmail.com
Tue Dec 16 02:43:20 EST 2025
Sure, I could live with it. I probably will, at least for now. Like I
said up front when I apologized in advance: it's a minor nit-picky kind
of thing. It's annoying. But if it can be fixed relatively easily, why
not try and do it? Doesn't everyone here want to see GnuCash evolve and
get better over time? I would hope that's a goal.
Tom
On 12/15/2025 10:58 PM, R Losey wrote:
> So... given that the Register Style persists if you have the register
> open, is that something that you cannot do?
>
> I agree that it would be a helpful option to have the register style
> be saved per register (as the widths are). I have wanted to use this,
> but ran into the same problem, and just live with it.
>
>
> On Mon, Dec 15, 2025 at 3:15 PM Tom Route36 <tom.route36 at gmail.com> wrote:
>
> Hi Mark,
>
> That's the first thing I tried. I figured if I was able to set
> and save
> Column Widths, then the same technique would also work for the
> Style/View setting. But no. It doesn't work. It's easy to confirm.
> Try setting one of your registers to a different Style setting
> than what
> your Register Default Style is. And for good measure change one
> of your
> Column Widths in that register. Keep the account register open, and
> close GnuCash. Then reopen GnuCash. Yes, you'll see that the
> register
> is still like you left it. It will have the same Style and Column
> Widths just as you had set it. Perfect.
>
> But now, go ahead and close the register. You can leave GnuCash open
> (no need to close it). Then reopen that same register. You'll see
> that
> yes, the Column Widths are exactly as you last left them. That's
> great.
> But you'll also see that the Style setting has reverted back to the
> Default Style. And that's my issue. GnuCash doesn't save the
> Register
> Style setting. It only saves the Column Widths.
>
> So is there any way to get GnuCash to save the Register Style just
> like
> it saves the Column Widths?
>
> Tom
>
>
> On 12/15/2025 1:14 PM, Mark Itzcovitz wrote:
> > I know David talked about column widths but the rule for the
> register
> > view is similar - you need to set the view(s) as you want, do NOT
> > close the account register(s), and close Gnucash.
> >
> > Mark
> >
> > On Mon, 15 Dec 2025 at 20:01, Tom Route36
> <tom.route36 at gmail.com> wrote:
> >
> > Hi David,
> >
> > I know that the column widths can be set and saved for
> individual
> > registers. But my question is about the Register Default Style,
> > not the
> > column widths. Is there a way to set and save the STYLE
> setting for
> > individual account registers?
> >
> > Tom
> >
> >
> > On 12/15/2025 8:48 AM, David Carlson wrote:
> > > Yes, but not for for all accounts of a particular account
> type vs
> > > other account types. Each individual register can be set with
> > > particular column widths and left open while shutting down
> > GnuCash to
> > > memorize the column sizes for that individual account
> register.
> > This
> > > information is saved individually for each particular data
> file
> > name
> > > in a file named [datafilename]dot gcm.
> > > Once saved, the settings for that account register become
> > persistent
> > > for following use even if the register is closed before
> closing
> > GnuCash.
> > >
> > >
> > >
> > > David Carlson
> > >
> > > On Mon, Dec 15, 2025, 7:18 AM Tom Route36
> > <tom.route36 at gmail.com> wrote:
> > >
> > > Hi all,
> > > First up, my apologies here for asking a minor
> nit-picky kind of
> > > question. But here goes. I know that GnuCash lets you go
> > and edit
> > > Preferences to set a Register Default Style to one of
> three
> > -- Basic
> > > Ledger, Auto-Split Ledger, or Transaction Journal. And
> once
> > you set
> > > that it becomes the default for ALL registers. And for my
> > EXPENSE
> > > registers (food, clothing, etc. where I have lots of
> splits) I
> > > default
> > > to the Transaction Journal style. But ...
> > >
> > > ... for my LIABILTY registers (mainly credit cards)
> it's much
> > > easier to
> > > reconcile those accounts when they're viewed as Basic
> > Ledgers. And I
> > > know how to go into each register and select View -> Basic
> > Ledger.
> > > Pretty easy and straightforward. But ...
> > >
> > > ... (here's the nit-picky part) every time I open one
> of those
> > > Liability
> > > registers, I have to do those two extra mouse clicks
> to set the
> > > register
> > > view back to Basic Ledger. Yes, it's only two extra mouse
> > > clicks. But
> > > each and every time? It's annoying.
> > >
> > > So, here's the question. Is there any way to override the
> > GnuCash
> > > Register Default Style either for ALL LIABILITY
> registers, or
> > > possibly
> > > for EACH register individually?
> > >
> > > What I'd like is for my EXPENSE registers to default to
> > Transaction
> > > Journal, and my LIABILTY registers to default to Basic
> > Ledger. If
> > > there's some hidden setting or preference that I just
> haven't
> > > found yet,
> > > I'd really appreciate any help locating it.
> > >
> > > Thanks,
> > > Tom
> > > _______________________________________________
> > > gnucash-user mailing list
> > > gnucash-user at gnucash.org
> > > To update your subscription preferences or to unsubscribe:
> > > https://lists.gnucash.org/mailman/listinfo/gnucash-user
> > > -----
> > > Please remember to CC this list on all your replies.
> > > You can do this by using Reply-To-List or Reply-All.
> > >
> > _______________________________________________
> > gnucash-user mailing list
> > gnucash-user at gnucash.org
> > To update your subscription preferences or to unsubscribe:
> > https://lists.gnucash.org/mailman/listinfo/gnucash-user
> > -----
> > Please remember to CC this list on all your replies.
> > You can do this by using Reply-To-List or Reply-All.
> >
> _______________________________________________
> gnucash-user mailing list
> gnucash-user at gnucash.org
> To update your subscription preferences or to unsubscribe:
> https://lists.gnucash.org/mailman/listinfo/gnucash-user
> -----
> Please remember to CC this list on all your replies.
> You can do this by using Reply-To-List or Reply-All.
>
>
>
> --
> _________________________________
> Richard Losey
> rlosey at gmail.com
> Micah 6:8
More information about the gnucash-user
mailing list