Linux: 2.4.11 migratoin to 2.6.13 Guide?

David T. sunfish62 at yahoo.com
Thu Sep 8 14:12:30 EDT 2016


Actually, James, have a look at:

https://www.gnucash.org/docs/v2.6/C/gnucash-guide/basics-migrate-settings.html <https://www.gnucash.org/docs/v2.6/C/gnucash-guide/basics-migrate-settings.html>

The section before might prove helpful as well:

https://www.gnucash.org/docs/v2.6/C/gnucash-guide/basics-backup1.html <https://www.gnucash.org/docs/v2.6/C/gnucash-guide/basics-backup1.html>

Cheers,
David

> On Sep 8, 2016, at 10:48 PM, james <garftd at verizon.net> wrote:
> 
> OH,
> 
> 
> 
> I did find overlook this in the FAQ::
> "backup my data"
> If you're using the XML (default) backend, GnuCash makes local backups for you every time it saves your file. It does this by renaming the previous version of the file with a date-time-stamp and a new .gnucash suffix. For example, if your data file is named MyAccounts.gnucash, one of the backups might be named MyAccounts.gnucash.20140131150812.gnucash.
> 
> 
> So that is the magic, all-inclusive data file to move over to the new system?  Any others files to move over? Just follow the backup/restores
> directions?::
> 
> "To restore from an off-disk backup, just copy MyAccounts.gnucash back into the directory where the original is. "
> 
> ???
> Will that work to migrate from one (2.4.11) install to a 2.6.13 install
> on a new system, both linux?
> 
> 
> James
> 
> 
> 
> 
> 
> On 09/08/2016 01:38 PM, james wrote:
>> Hello David,
>> 
>> As I mentioned before, there is nothing in the manual or Tutorial
>> located at gnucash.org, related to upgrades and moving to a different
>> computer; surely these are common occurrences... Upgraded on gentoo is
>> quite trival (emerge -u <pkg>) or a new installation on a new system
>> (emerge <pkg>). So I guess I should refined the question to what data
>> sets need to copied to the new installation?
>> 
>> Parsing the 'http://wiki.gnucash.org/wiki/FAQ' FAQ, I did find these
>> tidbits::
>> 
>> 1. Lots of antidotes to problems, after a migration
>> (gnucash --nofile);  remove/rename reports.
>> 
>> 2. Make sure gnucash-docs is installed (it is) assuming that's the
>> standard linux manpage for gnucash?
>> 
>> 3. Data files (default xml or sqlite) good to know, now I just have to
>> find the location dir of those xml files?  Note this page::
>> http://wiki.gnucash.org/wiki/GnuCash_XML_format suggests the gzip files
>> are indeed the xml format files.
>> 
>> 
>> 4. Reference to this document::
>> http://wiki.gnucash.org/wiki/User_Configuration_Files
>> But, none of those files
>> 
>> On the old system I do see these files::
>> using the linux 'file' command, interestingly the file types below are::
>> 
>> 'FORTRAN program' and 'gzip compresses  data, from Unix', respectively.
>> 
>> cat1.gnucash.2015#########.log
>> cat1.gnucash.2015#########.gnucash
>> 
>> And this file::
>> gnucash.workpages.27aug2016.gnucasch.2016#########.log
>> 
>> I also found these files::
>> /etc/gnucash/:: 'config', which is mostly empty and 'environment' which
>> seems to be important.
>> 
>> 
>> And this directory ~user/.gnucash  with 3 dirs (books checks translog)
>> with the files  'accelerator-map' which is significant, and
>> 'stylesheets-2.0' which is scant (probably default) and
>> 'expressions-2.0' which is empty.
>> 
>> Now, reading the standard man pages for 2.6.13::
>> 
>> 'man gnucash' is short and identical to 'info gnucash'
>> 
>> I'm not certain there are examples and useful information in
>> gnucash-docs-2.6.13, nor how to access those documents on (gentoo) linux?
>> 
>> 
>> Guidance on these file and migration/upgrade are most welcome.
>> 
>> 
>> James
>> 
>> 
>> 
>> 
>> On 09/08/2016 11:15 AM, David Carlson wrote:
>>> Perhaps the help documentation was not installed in your instance of
>>> Linux.  Go to the gnucash.org <http://gnucash.org> website and check the
>>> documentation there.
>>> 
>>> You will find that it is very easy, as all you have to do is copy your
>>> data file to your new data folder and do a fresh install of GnuCash.  If
>>> you need to retain custom reports or user settings there is a section in
>>> the FAQs about how to do that.
>>> 
>>> David C
>>> 
>>> On Thu, Sep 8, 2016 at 9:50 AM, james <garftd at verizon.net
>>> <mailto:garftd at verizon.net>> wrote:
>>> 
>>>    Hello,
>>> 
>>>    I've been using  gnucash for (4) years for a small business, without
>>>    issue on gentoo linux. Surely that's a testament to the fine folks
>>>    that wrote and maintain this codebase (kudos!).
>>> 
>>>    So I looked at the wiki, the Help Manual and the Tutorial and Concept
>>>    documents, and found nothing. Surely there is a list of files, I
>>>    need to copy the data over to a new computer with a fresh install of
>>>    gnucash on linux, and maintain the same chart of accounts. NO fancy
>>>    database, just the defaults when it was installed (as in 2.4.x).
>>>    Once I make this migration, I may do it twice onto (2) different
>>>    systems, just to have one to experiment with new features, using a
>>>    database (like postgres) and other interfaced scripts and programs
>>>    for test and development.
>>> 
>>> 
>>>    I'd think just using the same dir structure(s) and using scp as the
>>>    gnucash-2.4.11 file(s) transfer tool, while maintaining file
>>>    permissions and (tree)locations, would do the trick so when
>>>    gnucash-2.6.13 is fired up on the new system, it's pretty much the
>>> same?
>>> 
>>> 
>>>    I find no list of file(s) or guidelines for such an upgrade-transfer
>>>    semantic. Perhaps an indexed point into the archives of this list
>>>    where such an email has been previously posted? Or did I miss such
>>>    steps in an obvious document?
>>> 
>>> 
>>>    Any guidance is greatly appreciated,
>>>    James
>>>    _______________________________________________
>>>    gnucash-user mailing list
>>>    gnucash-user at gnucash.org <mailto:gnucash-user at gnucash.org>
>>>    https://lists.gnucash.org/mailman/listinfo/gnucash-user
>>>    <https://lists.gnucash.org/mailman/listinfo/gnucash-user>
>>>    -----
>>>    Please remember to CC this list on all your replies.
>>>    You can do this by using Reply-To-List or Reply-All.
>>> 
>>> 
>> 
>> _______________________________________________
>> gnucash-user mailing list
>> gnucash-user at gnucash.org
>> https://lists.gnucash.org/mailman/listinfo/gnucash-user
>> -----
>> Please remember to CC this list on all your replies.
>> You can do this by using Reply-To-List or Reply-All.
>> 
> 
> _______________________________________________
> gnucash-user mailing list
> gnucash-user at gnucash.org
> https://lists.gnucash.org/mailman/listinfo/gnucash-user
> -----
> Please remember to CC this list on all your replies.
> You can do this by using Reply-To-List or Reply-All.



More information about the gnucash-user mailing list