[GNC] GnuCash freezes when saving in Windows

[Scott Ellsworth]

Hi David and John and all,

My mother discovered something strange: GnuCash freezes up while
saving only if she uses the keyboard shortcut Ctrl-S. It does not
freeze every time in this case, but a lot of the time. But if she
clicks the Save icon, it does not freeze (this is GC v3.3, in Windows
10). Now she has saved the file many times in the latter manner, and
it has not frozen at all.
Be Well,
 
Scott
<<<< Scott Ellsworth || 415-625-3019 >>>>


----- Original message -----
From: David Carlson <david.carlson.417 at gmail.com>
To: John Ralls <jralls at ceridwen.fremont.ca.us>
Cc: Scott Ellsworth <scott at fastmail.us>, Gnucash Users <gnucash-user at gnucash.org>Subject: Re: [GNC] GnuCash freezes when saving in Windows
Date: Fri, 23 Nov 2018 20:00:28 -0600

Scott,

Sometimes,  but not always,  it can be useful to open the task manager
and look under processes to see if GnuCash is using a lot of CPU time.
If it is "frozen" it probably is using a lot of CPU time, but it also
uses a lot at other times too.
David C 

On Fri, Nov 23, 2018, 6:40 PM John Ralls <jralls at ceridwen.fremont.ca.us wrote:> Scott,
> 
>  Please remember to copy the list on all replies.
> 
>  Yes, the bug report is only for 3.x, but the problem is as likely to
>  be with Cairo than with Gtk itself and that’s common to both.> 
>  A better diagnostic is to get some stack traces, but that can be
>  challenging on Windows. There are instructions at
>  https://wiki.gnucash.org/wiki/Stack_Trace
>  <https://wiki.gnucash.org/wiki/Stack_Trace>. (The best is profiling,
>  but there aren’t usable tools for that on Windows in the build
>  environment that GnuCash uses.)> 
>  Regards,
>  John Ralls
> 
> 
>  > On Nov 24, 2018, at 9:16 AM, Scott Ellsworth <scott at fastmail.us>
>  > wrote:>  > 
>  > Hi John,
>  > 
>  > Thank you. I will try looking at these two possibilities tomorrow.
>  > It happens in both v2.6 and 3.3, and I'm not clear about whether
>  > the bug report pertains to both. As far as I can tell saving never
>  > ends. The pointer arrow turns into an hourglass and the program has
>  > to be forced to quit.>  > 
>  > Be Well,
>  >  
>  > Scott
>  > <<<< Scott Ellsworth || 415-625-3019 >>>>
>  > 
>  > 
>  > ----- Original message -----
>  > From: John Ralls <jralls at ceridwen.fremont.ca.us
>  > <mailto:jralls at ceridwen.fremont.ca.us>>>  > To: Scott Ellsworth <scott at fastmail.us <mailto:scott at fastmail.us>>>  > Cc: GnuCash user forum <gnucash-user at gnucash.org <mailto:gnucash-
>  > user at gnucash.org>>>  > Subject: Re: [GNC] GnuCash freezes when saving in Windows
>  > Date: Sat, 24 Nov 2018 08:53:32 +0900
>  > 
>  > 
>  > 
>  >> On Nov 24, 2018, at 7:45 AM, Scott Ellsworth <scott at fastmail.us
>  >> <mailto:scott at fastmail.us>> wrote:>  >> 
>  >> Dear all,
>  >> 
>  >> I’ve been using GnuCash happily for over a decade now, running
>  >> it in>  >> Ubuntu Linux. I’m trying to teach my mother how to use it for her>  >> personal finances, in Windows 10. But it doesn’t seem to be
>  >> working in>  >> Windows: The problem is that the program often freezes up when
>  >> saving:>  >> I installed version 2.6 (a few months ago), and then version 3.3
>  >> this>  >> week. I tried unchecking the box in the options for file
>  >> compression,>  >> and this seems to make it freeze up less often. I looked this
>  >> issue up>  >> online, but I don’t see any discussion that looks fully
>  >> relevant. We>  >> have been able to set up some accounts and expense categories, and
>  >> have>  >> started adding transactions. I’m pretty sure the last time it
>  >> froze was>  >> also upon saving, though it may have happened when selecting a
>  >> date for>  >> a new transaction, which was immediately after saving. My mother
>  >> is not>  >> very computer-savvy, so I need to make it just work normally.
>  >> Be Well,
>  > 
>  > 
>  > 
>  > Is it really freezing or is it just taking a really long time to do
>  > a save? If it’s a slow save, see
>  > https://bugs.gnucash.org/show_bug.cgi?id=795804
>  > <https://bugs.gnucash.org/show_bug.cgi?id=795804>, though if it
>  > really happened when selecting a date then it’s probably something
>  > else. You could try running from the command line with the --debug
>  > option and analyze the trace files to see if there’s any
>  > consistency to where it hangs.>  > 
>  > Regards,
>  > John Ralls
>  > 
>  > 
>  > 
>  > 
> 
>  _______________________________________________
>  gnucash-user mailing list
> gnucash-user at gnucash.org
>  To update your subscription preferences or to unsubscribe:
> https://lists.gnucash.org/mailman/listinfo/gnucash-user
>  If you are using Nabble or Gmane, please see
>  https://wiki.gnucash.org/wiki/Mailing_Lists for more information.>  -----
>  Please remember to CC this list on all your replies.
>  You can do this by using Reply-To-List or Reply-All.